Got saw fixed. Keyway broke out of the flywheel. Mechanic said he has never seen that happen with a chainsaw.
@craigrichardson4641
2 жыл бұрын
Hope I don't have that problem with mines.you have any update videos on the saw I have the same one and just got it few weeks ago.
@craigrichardson4641
2 жыл бұрын
I have the same exact saw you have to break it in first and it will have little more power.after one gallon mines did a little better but what anyone expect for 100 bucks.
@Triumphwonderdog
4 ай бұрын
Why is it so I interesting the bar is inside the bar cover? Why is “that’s interesting” is used so much? That’s interesting !
@clintbliss2046
3 ай бұрын
Well that's interesting
@lunarrn
3 жыл бұрын
Been nice to have a link to eBay. I've been searching but I can't find any $85 saws
@truckinedchannel9982
3 жыл бұрын
I just looked it up. Same saw is now $102. Everything goes up over time
@lunarrn
3 жыл бұрын
@@truckinedchannel9982 thanks. Now I'll just look for $102 chainsaws. 😀
@@lunarrnthere’s a better one that’s a husqvarna clone for $90. 52cc. Made much better.
@danielborth7753
9 ай бұрын
I want to cancel my order for the Black Max and get one of these in order me some Amazon chains which are much better than what they give with this
@thecollectoronthecorner7061
2 жыл бұрын
Plastic throwaway saws. Im using 60,s XL12 homelites and some larger 70,s Homelites. 50 plus year old saws still going strong.
@txlonghornremodeling
8 ай бұрын
Even the older 70’s model metal poulans were great saws. I have 2. Besides new fuel lines every 10 years or so, they run forever
@wadebarnes6720
Жыл бұрын
Are you still able to use it and would you buy it again
@truckinedchannel9982
Жыл бұрын
Yes, I was able to repair it, and it is still running. After a few modifications it works fine
@shannonwhitaker9630
Жыл бұрын
What oil ratio are you running ?
@truckinedchannel9982
Жыл бұрын
@@shannonwhitaker9630 been using 40:1
@shannonwhitaker9630
Жыл бұрын
Thanks ! Yep the recommended ratio of 25:1 is just crazy.
@jeremiahlee6335
2 жыл бұрын
Equivalent?!
@truckinedchannel9982
3 жыл бұрын
Chainsaw has already failed. Will do an autopsy video if I don't have to send it back.
@clintbliss2046
3 ай бұрын
That's interesting
@EcSsAwS
3 жыл бұрын
Yea...those bar studs DO NOT need to be that right. You will strip that case out so fast And how about letting a saw warm up before you rev the piss out of it And I'll ignore the fact you didn't do a face cut on that tree and got the saw stuck Instantly lol
@truckinedchannel9982
3 жыл бұрын
It was a joke to get folks riled up. I wasn't actually tightening the that tight, and yes, it was warmed up. You think a China saw is going to fire up that easily out of the box? It took 10 pulls to get it primed and smoked like crazy.
@danielborth7753
9 ай бұрын
You always got to adjust the chain after it heats up it will stretch and I've seen even a brand new song you might have to adjust the carburetor mixture not necessarily the idle speed
@iowaunemployment
3 жыл бұрын
This is not a Stihl Clone it is a Zenoah Clone saw, model 5200 or a model 4500. The top cover is that of the 45 or 52 cc Zenoah. That is free advice and worth what ya paid for it. A 45cc will have a 43mm piston and a 52 will have a 44.9mm piston.
@truckinedchannel9982
3 жыл бұрын
Cheap china saw. Actually I have found parts are closer to Husqvarna saw. Engine runs fine, but bar and chain are crap.
@iowaunemployment
3 жыл бұрын
@@truckinedchannel9982 I think that Husky bought out Zenoah. All parts can be found by searching Chinese 5200, there you will see the 4 model numbers, 4500, 5200, 5800 and 6200. They all use the same carb, so the bigger size doesn't help much but for torque. I have found that parts go bad fast on the $80 saws and the 130 Chinese clones are better quality.
@truckinedchannel9982
3 жыл бұрын
@@iowaunemployment that's why I use Stihl. Just bought cheap on to see how it works
@iowaunemployment
3 жыл бұрын
@@truckinedchannel9982 These saws work really well and last a long time. It is worth the time to fix them up. I have 3 and use them without mercy.
@SawyerQuinn
2 жыл бұрын
Do you know what type of chain these 5200 saws take? I heard that they suck, and I'd like to order an Oregon chain for the saw I just ordered. I'm having a hard time finding the specs.
@MrHangerone
3 жыл бұрын
Hi invite to a friendly competition from down under Australia, Chinese chainsaw underdog competition part 1 rules cheers kevin
@truckinedchannel9982
3 жыл бұрын
Check out my competition videos where I put a Stihl against the Chinese saw
Пікірлер: 33