Update: VOXELPLA Bento Box now ships with 24v fans and power supply. (No need to use a buck converter)
@SlinkySlonkyWaffle
7 сағат бұрын
@@ModBotArmy thats actually amazing news, if only i had space for them in my ultimakers xD
@ModBotArmy
7 сағат бұрын
@@SlinkySlonkyWaffle what Ultimakers are you running???
@SlinkySlonkyWaffle
7 сағат бұрын
@@ModBotArmy i used to run an ultimaker 2, but gave it to my brother, i now have a tall prototype ultimaker 1 that ive modded to an unrecognizable extent and am planning on converting a UM2 to coreXY (it was a parts printer anyways). my tall ultimaker has a UM2 printhead with E3D volcano hotends in it, dual extrusion works more than well enough despite there being no solenoid to move one of the hotends up and down
@komischertyp4
7 сағат бұрын
I just put the stock exhaust fan into my bento box. Seems to work fine
@ModBotArmy
7 сағат бұрын
@@SlinkySlonkyWaffle nice old school ones then. Haven’t seen to many with heavy mods. I got to play around with the 2+ quite a bit years ago, it was a workhorse.
@simplegamerz9485
7 сағат бұрын
ooooooo 4min also love how we are still teasing Uncle Jessy about his k1 door
@ModBotArmy
7 сағат бұрын
Haha Uncle Jessy is the man. This was one of the wildest things I’ve seen on a livestream.
@andrewwillcoxon
5 сағат бұрын
@@ModBotArmy His authentic reaction was priceless. Also, thank you for all your awesome content!
@passipassi100
7 сағат бұрын
I would love a video on the custom firmware!
@x9x9x9x9x9
7 сағат бұрын
Man i hate how good these bambu machines are. I wanted to stay a hater but their machines truly are good. I picked up an A1 kinda expecting it to be over hyped but no its really that good. The only flaws i have an issue with are the print volume and not being open source/using proprietary hardware. But even the proprietary hardware isn't expensive. Its not like makerbot was back in the day. Also just the ease of replacing parts is super nice. No more leaky nozzles when swapping between them. That alone was the biggest thing for me.
@valentinmaibach3330
7 сағат бұрын
I have the cryo plates on all my printers (P1S and A1s) and they do work really nice. Also just a cool looking plate
@ModBotArmy
7 сағат бұрын
The pla and petg one or the other one??? The color is pretty unique.
@valentinmaibach3330
52 минут бұрын
@@ModBotArmyIts the Cryplate Pro with the rougher Texture. I have it for all my A1 in the Printfarm but havent been able to test ASA and Nylons on my P1S yet. Will try this next week for shure. Works great for Petg and Pla at lower temps and dont even have to use brim or mouse ears on it anymore comared to the bambu textured. Also the ned orca 2.2.0 beta has support for them as cool textred plates.
@Tarbard
7 сағат бұрын
Good video, i'd love to see another one with more mods.
@leesmithsworkshop
4 сағат бұрын
Today I gave my P1P some love and upgraded the gears and a 0.6 hotend to hardened steel, replaced the cutter and roller - wiper thing and cleaned the rods. Then I printed some of the new Bambu ASA-CF and it looks very nice.
@ModBotArmy
4 сағат бұрын
@@leesmithsworkshop maintenance even occasionally is really important. I would love to say I’m a shining example of it… but that’s not the case 😅
@leesmithsworkshop
4 сағат бұрын
@@ModBotArmy for me it's normally when something fails for me too, but this time the ASA-CF required the upgrades. I also plan to look at the ams while things are sperate.
@username9774
2 сағат бұрын
X1Plus hardware would honestly be what it takes for me to consider buying a Bambu printer, that sounds really cool
@hotfix7387
5 сағат бұрын
First it was great to meet you in Fabreeko's booth at 3D Printopia (I was the guy with the colored hair with 2 kids and talked to you about your Ikea filament storage system being better than standard rep-racks). You are one of my favorite KZitem content creators, so I was excited to see your video today on a number of items I have been considering. I definitely would love to see you dig into the X1 Plus 2.0 features and especially the capabilities they are adding on the hardware front. Those all sound very interesting and I would love to know more before I take the plunge myself. Keep on being awesome!
@ModBotArmy
5 сағат бұрын
Hey! Yes, I remember you :). Great meeting you! I had such a fun time. There was so much to see. I think I got through most of the rows but I only got to take in a portion of what was there. Awesome, I hope this helped give you some more info. I dont normally mesh so many things into one video but in this case it felt like it made the most sense. Sweet, yes I will be looking into the firmware then. I am also going to try to get one of the boards they created in. While it wont be for everyone I think its really interesting and I always love seeing what the community is able to come up with. Have a fantastic weekend!
@tenchuu007
7 сағат бұрын
I've been waiting for something in the latest mods.
@tomyocom5886
2 сағат бұрын
Thanks for Mods, that was a LOT of work. I have noticed when people start modding Bambu that the quality is NOT as good or they never got the quality that most of us get and then modded their machines. I would love to see some prints AFTER all these mods which is the reason for most of the mods. A dirty extruder would seem to have been step number two in search for the problem of bad prints . I also want a diamond nozzle but have not seen proof of BETTER prints. A mod for me at this time has to be an upgrade. I am drooling over that orange peel skin though, haha. Thx for very hard work here all those mods in a very short in relation video.
@SupaaMann
6 сағат бұрын
Super off topic but I did promise to leave a comment on your next video 😅 It was super cool chatting with you at 3DPrintopia and I'm glad you got a chance to walk around and just experience it (on Hector's dime). Any updates on the E3D stroller/bassinet for smrrf?
@ModBotArmy
5 сағат бұрын
Hey! I am really glad that we had some time to chat. I had such a great time seeing everyone and checking out all of the awesome things. Massive thanks to Fabreeko for making it possible. Haha its not in the cards for this year unfortunately, but I may try to make it happen for 2025!
@boboquad
Сағат бұрын
From the mark on the extruder door fan, it looks like you still have an old model. It could be the same fan on the hotend. The new ones have Snowfan branding on them (the original ones just have number markings) and according to reddit they are quieter and more powerful. I currently have an X1 from Kickstarter and a new p1s and I can confirm that at least the extruder fan is quieter on the p1s than on the X1. I don't notice it audibly there anymore with the extruder door fan. But I haven't done my own tests yet, on print quality and possibly reducing the amount of clogged nozzles.
@Trust_me_I_am_an_Engineer
5 сағат бұрын
Interesting video ! Nice upgrades! I use the G11 daily with PLA and PETG . And.... PETG didn't stick really well 🤔until after I sanded the plate completely lightly with P600 and washed it with cleaner and degreased with IPA. That is also described at the VPSdata webshop under "Garolite care hub" ( bottom of the page 🧐 ) . So now I print PETG at a higher bed temp of 90°C and 245 nozzle temp for all layers and no fan for first three layers at 0.2 0.25 and 0.3 layer height. Sticks very well. Haven't tried my G10 plate (yet 😋 ). Might help with ABS, but I don't use that. Cya!
@ModBotArmy
5 сағат бұрын
Out of curiosity do you use the same plate that I have or is it a different version? Thats something to consider. Especially since I was having some adhesion issues with ABS. Wait I didnt see the second part of your message haha so I would say yes you have the same plate. Interesting, yeah PETG stuck really well after I cleaned it and just bumped 10C. Who knows could be a host of variables. :)
@Darknynja2
29 минут бұрын
I definitely want to see a video regarding the X1 Plus firmware.
@Boutsman
3 сағат бұрын
Nice, I have a G10 and G11 plate from VpsData. Really made a big change. That G11 is awesome for TPU.
@ModBotArmy
2 сағат бұрын
Out of curiosity since you have used both what filaments do you use with each? Someone told me that since its resin coated they should be the same in theory but I wonder if that means a different treatment is used for each.
@Boutsman
Сағат бұрын
@@ModBotArmy It's the same fiber but different resin and a different technique to press the sheets. I use the G10 for Pla, PetG, PC, abs and ASA. All stick and release as they should but for pla you have to run the heated bed a bit warmer then with a pei sheet. 60°C is a real must for pla with G10. G11 can take any filament but you have to print your pla on 65°C. For tpu it's like magic. Want to print tpu? My advice: use a G11 buildplate. Been using both plates more than a year on Bambu X1C, ender 2, ender 3 and sunlu s9+. Really need one on the v400. Pretty please 😅 🙏 @vpsdata
@DrMechxico
6 сағат бұрын
I installed an E3D Obxidian and I’ve been waiting for the panda claw and Panda Jetpack for a month. The Cryogrip Pro is great. BIQU is a nightmare on communication. I just want to see how fast this thing can go with all those upgrades.
@ChristopherRose
5 сағат бұрын
I would like to see the x1 plus video Daniel
@ModBotArmy
5 сағат бұрын
Awesome, thanks for the feedback. There has been a few that have commented about it so I will definitely add it to the list. I am going to try to get that board in as well.
@henninghoefer
2 сағат бұрын
2:55 Regarding the door there are good and bad news: The good news is that apparently (according to multiple people on the BambuLab subreddit) new X1Cs and P1Ps actually ship with a transparent (not tinted) door. The bad news however is, that it's much harder to remove (seems to be glued in addition to being held by screws). 6:00 @ModBotArmy How many hours did your old extruder gear have on it?
@boboquad
Сағат бұрын
I don't know what new means from their perspective, but I've had my p1s for 3 weeks and the door is just as tinted as my X1.
@NoMercyFtw
43 минут бұрын
Plus I think polycarbonate retains heat better than glass
@mariospanayiotou6644
4 сағат бұрын
Something you missed, you should run calibration after doing surgery on your printer especially hotend and gear (toolhead stuff). After you changed your gear you only ran a test print.
@ModBotArmy
4 сағат бұрын
@@mariospanayiotou6644 calibration is very limited on this machine and in the past few things I’ve done it hasn’t been needed. I think the firmware check for certain deviations and auto calibrates but regardless running through the calibration on the screen like you mentioned is not a bad idea.
@davidjernigan8161
4 сағат бұрын
Maybe a little green or blue locktite on the door screws so over torquing isn't a possibility .
@ModBotArmy
4 сағат бұрын
I’m always hesitant using it around plastics. It’s probably fine but after my experience having it crack ABS parts I’m more careful. If you pre feed a little into the thread that’s likely no issue.
@roysigurdkarlsbakk3842
6 сағат бұрын
I'd love a review of those X1Plus things. And btw, that ESP32 board you mentioned, it has an ESP8266 mini, as you can see printed on the chip, that is, the generation before ESP32. It wouldn't surprise me if it's running a fork of WLED ;)
@ModBotArmy
6 сағат бұрын
Hmm, the one I showed was the previous version and I know there has been some revisions for extended. Ill have to pop off the cover and see if its also an 8266 then. Ive never used WLED before but have a board and plans to. Is the UI very similar to what I showed on screen?
@roysigurdkarlsbakk3842
6 сағат бұрын
@@ModBotArmy no, the UI isn't that similar, that was why I'm guessing it's a fork. WLED runs on an ESP8266 too, only not as well as on an ESP32.
@TheTsunamijuan
6 сағат бұрын
If you can't get your extruder gear out cause its stuck... Apply hot air too the assembly from a hair dryer, to soften the filament. I don't recommend a heatgun, as they get too hot too fast, and really your just going to burn yourself unbelievably fast.(since you want to be applying pressure to pull the assembly apart, while under heat).
@ModBotArmy
6 сағат бұрын
Is this supposed to be a situation where you have melted filament between the gears so you can’t pull them apart to get out? Just trying to make sure I understand the scenario.
@TheTsunamijuan
5 сағат бұрын
@@ModBotArmy Yes 100%, sorry i am just waking up and not 100% coherent yet :), for instance, i had some PVA stuck the other day. Making it seem like both half's of the assembly, where fused together.
@Monopek_Cannibal
7 сағат бұрын
3:57, I wonder if wool skins for printers in the form of animals will appear in the future, for example, as from the movie "Dumb and Dumber", etc. ? 🤔
@matthawley781
4 сағат бұрын
You should check out Darkmoon build plates as well. I have their G10 Hobby and it's a solid plate and have had no issues from PLA to ASA
@ModBotArmy
4 сағат бұрын
I haven’t heard of them. They have a website?
@matthawley781
4 сағат бұрын
@@ModBotArmy yeah search for darkmoon3d
@matthawley781
4 сағат бұрын
Sorry if this is spamming, my comments are disappearing. Search for darkmoon3d
@JohnOlson
5 сағат бұрын
Do you plan on doing a comparison of the E3D HF obxidian and the diamondback?
@ModBotArmy
5 сағат бұрын
Hmm, I hadn’t considered it but I could. I already have flow tests done for the ObXidian hf. It will beat the diamondback in that regard. It’s hard to show the abrasion resistance in any meaningful way though without dumping rolls of material through them both and grabbing a microscope.
@bruno7573
5 сағат бұрын
A peine sortie et déjà des upgrades a tout va,lets go le porte monnaie !
@AndrewAHayes
6 сағат бұрын
The hardened steel gears look like brass to me, are they? It is strange that Bambu lab removed the option to downgrade your firmware in order to flash the third party firmware, I guess their new firmware keeps the ability for them to collect your data.
@ModBotArmy
6 сағат бұрын
According to the specifics on the gears they are "Golden Nano-Coated". The color looks brassish but a little different to me in person. Yeah, unless things have changed once you go to the third party firmware I know initially there was some iffyness with warranty/support. I would recommend for anyone to wait until the printer is over the 1 year mark to not risk it.
@remiilatte
4 сағат бұрын
I would have loved to see the cryogrip pro to see if it actually works with the no heating
@ModBotArmy
4 сағат бұрын
@@remiilatte I may need to do a video on it. There seems to be quite a bit of interest.
@remiilatte
3 сағат бұрын
@@ModBotArmythat would be great since I can’t find any other videos on it either. Biqu needs to get more information on them out there
@chicabomb5933
6 сағат бұрын
8:55 if you use 24v why didn't you just put the fans in series?
@ModBotArmy
6 сағат бұрын
I typed up a big old message and then deleted it on accident. Basically, it can be done but the risk is if one fails the other will be taken out. In this application its probably minimal risk but I already had the buck converter and generally prefer to just step down when I can.
@kyrkas2008
2 сағат бұрын
Why did your toolhead become brown-yellow like its burned?
@ModBotArmy
2 сағат бұрын
@@kyrkas2008 that’s a great question. My guess is very likely all the abs/asa i have printed on this thing.
@cinobro6393
7 сағат бұрын
God that crappy textured vinyl wrap looks absolutely awful
@ModBotArmy
6 сағат бұрын
Its growing on me, and style/looks are a very subjective, but the main thing is installing it is a little tricky, and I really wish the cutting left a smoother edge. Even with the assisted cutting tools from close up you can see the imperfections. Part of that may have been my fault but given that I did take my time and follow instructions its probably close to what most can expect.
@Florens1989
6 сағат бұрын
I would like to upgrade my hotend. And can't choose between Panda e3d revo and the e3d hotend. What do you think is better?
@ModBotArmy
6 сағат бұрын
I have the Panda revo but havent installed it. I've had a great experience with the Obxidian for high flow. I also really like the dimaond. Unless you already using a bunch of revos I would probably opt for diamond or HF.
@Florens1989
6 сағат бұрын
Thanx for the super quick reply 😊@ModBotArmy
@chriskwakernaat2328
7 сағат бұрын
the color change on that filament cut handle is obvious.. heat exposure? 5:42
@ModBotArmy
7 сағат бұрын
I think you’re referring to the extruder gear with the timestamp. Could be, maybe a filament swap didn’t have enough time to cool or something. First time I’ve experienced it in my bambus. I do throw a lot of random filaments at them so who knows. 🤷
@hellwhichnickisfree
6 сағат бұрын
@@ModBotArmy I think 5:30 shows it much clearier. Lots of yellowing on the lower part of the filament cutter.
@JakJakku
6 сағат бұрын
@@ModBotArmy I believe he's referring to the handle of the filament cutter, which has yellowed significantly. You can also see it on the other side of the extruder vent. Any idea what this might be?
@ModBotArmy
6 сағат бұрын
@@JakJakku ahh derp yeah I read the comment wrong. I print a ton of ABS/ASA on this thing. It could be heat but I haven’t heard of heat issues affecting the parts. It’s entirely possible but part of me wonders if it’s the fumes/off gassing from the filament as well.
@dosdont
6 сағат бұрын
Meh, at this point I'm waiting for their next X1C, whatever they decide to call it.
@ModBotArmy
6 сағат бұрын
I am very curious to see whats next. Something larger? a V2? Idex? Tool changer? Multiple options? Haha all I have is speculation at this point.
@SlinkySlonkyWaffle
7 сағат бұрын
no shade to modbot himself, but all the cosmetic mods are so lame... wrapping your printer in fake leather? come onnnnnnnnnnnn let us put the goliath hotend on this printer or something lmao
@ModBotArmy
7 сағат бұрын
lol I like cosmetic mods. I used to do a bunch of case mods to game consoles and liked adding windows and LEDs. Probably smaller audience for them over performance based but I still think they have their place.
@Artylius
6 сағат бұрын
Yeahhh, that stuff is ugly and also just so not necessary. It is a waste of money in my opinion. Doesn't provide any functionality at all
@donjohnson19
Сағат бұрын
cant use the upgraded tuchscreen with the stock updated firmwere unfornatily
@ModBotArmy
Сағат бұрын
Oh did they end up blocking the panda screen with later updates? There was talk months ago so I never updated my P1S but I never heard it happened.
@donjohnson19
52 минут бұрын
@@ModBotArmy yeah from what people are saying the newest update blocked the tech screen because panda is behind on updates
@cobra6114
6 сағат бұрын
That is an excessive amount of grease on those gears.
@ModBotArmy
6 сағат бұрын
@@cobra6114 I tend to go heavier vs lighter when applying grease. It hasn’t been an issue before and you can always wipe up any that ends up being pushed out after. My main concern is going to light and having the gear prematurely wear down.
@cobra6114
6 сағат бұрын
@@ModBotArmy no i hear ya. My concern would just be the grease migrating its way (slowly and over time) into the portion that grabs the filament and contaminating the nozzle, etc. All good!
@ModBotArmy
6 сағат бұрын
@@cobra6114 no you have an absolutely valid concern. Perhaps at the very least it makes sense to go lighter where those gears mesh to prevent this from accidentally happening. Its good feedback 👍
@cobra6114
6 сағат бұрын
@@ModBotArmy much like the lead screws on the X1, they just shouldn't be dry. If you use good quality grease in applications like that, it will adhere well, and provide that thin layer of protection between the mating surfaces of the two gears. Cheap grease will heat up due to proximity to nozzle, gravity will always win, and there will be long term issues. Hopefully I am wrong. But less is more sometimes.
All of BTT stuff is half baked. If you need support be aware you're getting half=assed answers. If you have an existing problem, once it goes out of warranty tough. They won't consider anything other than you buying another. The panda touch is garbage. Woudln't purchase a thing from them for the BL printers. The wham bam carbon plate is a nice plate to look at.
@MotFPS
5 сағат бұрын
Meh. This is just a hobbyist modding their printer. Not every mod is a good mod and can make things worse
@ModBotArmy
5 сағат бұрын
@@MotFPS yeah I did state these are mostly quality of life improvements more than anything. The machine is really solid as is. That’s why I didn’t really touch it for so long.
@jotenmike
7 сағат бұрын
Did I just watched 15min ad...
@cinobro6393
7 сағат бұрын
Yes
@cinobro6393
7 сағат бұрын
Yes you did…
@Artylius
6 сағат бұрын
Yeah, literally none of these are basically something that drastically improves the X1C/P1 printers, especially the cosmetic ones. Changing a door from Glass to Plastic so it "doesn't shatter"??? What are you doing to your door??? Came here hoping for some good recommendations, but came away with things NOT to buy
@jotenmike
6 сағат бұрын
@@Artylius I agree, ugly wrap, plastic door and LED lights that make it way too bright. Rest of just waste of money. Just flag video as an ad. This made me unsubscribe.
@ModBotArmy
6 сағат бұрын
Tried to include a fairly wide variety of things. There are a handful of cosmetic yes, but filter, hotend, extruder gears, and even cover all serve a purpose. With a machine like this thats already really solid (which I state) gains are going to be minimal. Its not the same as taking a half baked printer and throwing things on it that make a drastic difference. It's actually really nice that any tweaks/modifications are optional and not required, unlike how many other printers have been that would need it to just be halfway reliable.
@Speedgaming802
4 сағат бұрын
the skin is so ugly
@ModBotArmy
4 сағат бұрын
Everytime I see my printer I want to play basketball lol
Пікірлер: 107