Just wanted to point out that there is an hour wait time in between the application of MOHS and Skin.
@tredfxman
2 жыл бұрын
MOHS't u creep under my Skin..?? 😄
@SheekTresSesenta
Жыл бұрын
How strict is that hour? Will it be ok after 30-45 minutes?
@SDEsthetiqueAutomobile
7 ай бұрын
@@SheekTresSesentano! Wait the 1-2 hour
@SheekTresSesenta
7 ай бұрын
@@SDEsthetiqueAutomobile I did thanks!
@poman8772
9 ай бұрын
Guys, I absolutely love this product! Applied to a neighbors truck over a year ago and it’s holding up fantastic! Applying to a Black Sequoia this weekend can’t wait to see the results! 🤩👊
@GYEON_official
9 ай бұрын
Thanks for the feedback. We are glad you like it and lives up to your expectations! Have fun with the Sequoia. Regards, Y.
@yarinsheiman7789
2 жыл бұрын
Enjoyed watching this so much!! Beautiful car!
@Schmitzelhaus
2 жыл бұрын
For the last coating on my car i used the Q² Primer from you guys and was quite pleased with the results! Would you recommend it for this 2 step as well or are there any compability problems by chance? EDIT: Also how have i only noticed now that MOHS is SHOW if you turn it?! Damn.... 🤪😅 🙈🙊🙉
@GYEON_official
Жыл бұрын
Q² Primer is the perfect last polishing step and gives you only benefits, so yes I would recommend it for sure. Regards, Y.
@Cman815
2 жыл бұрын
Hey guys! Just applied my one coat of gyeon mohs, and followed up with my gyeon skin! I’ve got a truck and it took me about 1hr 15 minutes to complete the mohs. Skin went on right after! Mohs was a little tricky with my humidity and heat in my garage, but they were awesome! Thank you for these great products!! I also cleaned my tires with gyeon tire cleaner (black bottle, best product I’ve used on my tires, and I’ve used a lot of tire cleaners for my 37” MT tires!) I finished up with gyeon tire and couldn’t be happier! Maintenance question.. I own gyeon cure and gyeon ceramic detailer, and will be washing with gyeon bath+. (Love your guys stuff) after washing at the 14 day mark, what is the best product to top with? Anything at all? Thank you guys! Keep making AWESOME stuff!
@GYEON_official
2 жыл бұрын
Hi, thank you for your feedback and great to hear you like our products. Regarding your maintenance: just use Q²M CeramicDetailer or Q²M Cure as your drying aid and you will be more then fine. I would recommend to use our Q²M Restart Shampoo once every 3 washes to keep your coating “fresh”. Good luck and enjoy. Regards, Y.
@Cman815
2 жыл бұрын
@@GYEON_official thank you!!
@david.k
2 жыл бұрын
Are you going to make a comparison video of 2 coats MOHS vs Syncro? I would like to check the benefits of using Syncro instead of standalone MOHS in 2 coats, in categories like self-cleaning and the overall look :)
@GYEON_official
2 жыл бұрын
Not the plan. First of all, the intention of Q²Mohs EVO is to have stunning results in a one layer application. If you want that extra, then Q²Syncro is the way to go. Overall look and durability depends on way to much variables that can alter the final result. Regards, Y.
@david.k
2 жыл бұрын
@@GYEON_official thanks for the answers, that makes the choice easier
@M.E63
2 жыл бұрын
You said the previous skin was slick but I heard the new one is not slick but adds gloss , I heard the evo mohs is very slick but once you apply skin then the slickness is gone . Can you confirm if this is true ?
@waxmanvids5015
2 жыл бұрын
true
@usasupra23
2 жыл бұрын
How long does this combo coating last? I love the old Syncro kit and got 2 years out of it. Can we buy just Skin yet?
@SmokingCrop
2 жыл бұрын
up to 50 months or 50 000 km; and no, you can only get it with syncro evo
@Firemedic4500
2 жыл бұрын
What size would you recommend for a small suv?
@waxmanvids5015
2 жыл бұрын
30 ml
@NipponStiqqyPaint
2 жыл бұрын
When are we going to see Gyeon apparel for sale in the States? I want that d r i p
@GYEON_official
2 жыл бұрын
There is something cooking 😉. Regards, Y.
@robl6044
2 жыл бұрын
Will this product work in an open carport in the summertime of ease application as I live in Ontario Canada for our summers have high humidity
@GYEON_official
2 жыл бұрын
They will work but when you are not experienced with coating application I would recommend to start with a single layer product. The new Q² Coating EVO line up has been reworked to make it outdoor friendly however common sense is always needed. Never apply in direct sun and on hot panels and the higher humidity rises, the smaller the areas and the shorter wipe off time becomes. Regards, Y.
@chrisV8
2 жыл бұрын
I’ve applied a fair few Gyeon coats under my carport in Belgium in decent weather. Just make sure there is no wind! Hanging a plastic foil to close of your carport from the direction any wind might come can also be useful
@ronsilco3977
11 ай бұрын
Do you have to throw away the microfiber towels after wiping down the ceramic coating?
@GYEON_official
11 ай бұрын
No, they can serve different purposes later but I wouldn’t use them on paint anymore. Regards, Y.
@rogerrichard551
2 жыл бұрын
Hi, I own a Mustang Mach-E. I was wondering. Is a 30ml MOHS enough for two coats? Can I also apply the MOHS on trims and glass? Thanks
@GYEON_official
2 жыл бұрын
Hi, Not it will not be enough. I would suggest a minimum of 50ml. Q² Mohs EVO is NOT suited for plastic trim and glass. We have dedicated coatings for that. Regards, Y.
@skrsys
2 жыл бұрын
Would having 2 layers of Mohs then top with Skin provide a more durable and better coating?
@GYEON_official
2 жыл бұрын
If your preparation is on point it could. Although 1 layer of Q² Mohs EVO and SKIN on top is already very exceptional in terms lf durability. I would stick to that. Regards, Y.
@ronsilco3977
11 ай бұрын
Can these be applied outside?
@GYEON_official
11 ай бұрын
Yes I can be done but when you would be a first time user then a 2 layer system installing outside might not be the easiest start. I truly believe and advise that coating installs in a controlled environment are the way to go. Regards, Y.
@ronsilco3977
11 ай бұрын
@@GYEON_official Okay thanks! I have use the Pure and that came out very nice. I do have a garage to install the the coating but I have very limited space.. Thanks!
@waxmanvids5015
2 жыл бұрын
just ordered...gonna test it out compared the "other guys" ;)
@jd4957
6 ай бұрын
I bought the 100ml kit and have about 15-30ml Skin left. Can you re-apply Skin as a topper when properties start to visibly diminish later on down the road?
@GYEON_official
6 ай бұрын
With Q²Skin this will be possible but just make sure you have the surface properly prepped and your bottle of Q²Skin is stored and sealed correctly. Regards, Y.
@Chunkychocolatemilk7
3 ай бұрын
@@GYEON_officialHow would one go about prepping an already coated car? No clay barring or polishing I assume
@GYEON_official
3 ай бұрын
@Chunkychocolatemilk7 We made a video about “how to decontaminate a coated car”. This sums it pretty much up when no polishing or claying is required/demanded. Here is the link: kzitem.info/news/bejne/w3mEnpp3s6iLaW0si=zvT4kuJ0mLZMcMu6 Regards, Y.
@joelpasserell4525
Жыл бұрын
Doing my first Syncro EVO application. I was going to prep coating with Q2M Prep but I was reading the instructions & it says that I need to do a degreasing/wax stripping wash with dish soap like Dawn. That is the recommendation. Is the dish soap wash required to maintain any type of warranty? If I skip the dish soap wash & just use Prep, will that affect the binding of the coating at all? Why put in the directions about doing the soap wash right before coating it and then also have a prep spray. If the dish soap wash is for degreasing, then what else could be left afterwards that I would need to also apply your Prep spray? Seems redundant. Just adds confusion. 🤔 Appreciate the help. P.S. I used 3D ACA 510 compound with Rupes yellow Medium wool polishing pad if that factors into whether I need to soap wash or not before using Prep spray.
@GYEON_official
Жыл бұрын
Hi, with that polishing combo you will definitely need a hotwash with dishsoap!! It’s absolutely mandatory to have proper coating performance. After your dishsoap wash, check the car again inside with a proper inspection light. You could be sursprised. The final pass with Q²M Prep is to remove leftovers and possible film or smears. I hope this answers your question. More in depth polishing and degreasing we address in our professional trainings. Regards, Y.
@joelpasserell4525
Жыл бұрын
@@GYEON_official Thanks...same with KochChemie products? Are there any polishes/compounds that I can just use the prep spray without degrease wash?
@GYEON_official
Жыл бұрын
There are many variables, from polishing techniques to polish process…that’s one of the reasons we recommend a hot wash. I can’t assess this from a distance to all our customers in more then 90 countries. A single stage polish with Q²M Polish or Q²Primer from Gyeon is the way to go if only Q²M Prep would come into play. Regards, Y.
@evangelospapagiannis6643
7 ай бұрын
Just finished intalling the wonderfull "Syncro Evo" kit in both my cars🤩...amazing experience! And my only exerince with ceramic coatings was "Can Coat"😁...wich works anbelievable by the way! But in my Laserblue Golf Mk5 car i experienced the one thing that made me wanna cry😭.... Heavy Raining for almost 20 minutes... after 15 hours of the instalation... Will my wonderfull looking cooating survive that???🤕 Please help...some advise is very much needed...
@GYEON_official
7 ай бұрын
Hi, it is of course not ideal but did you use Q²M Cure after your Q²Skin application? Regards, Y.
@evangelospapagiannis6643
7 ай бұрын
@@GYEON_official @GYEON_official thank you sooo much for the rapid response...no it wasn't available at my local store, and i was too enthusiastic to see the wonderfull result, that i couldn't wait...my fault😞
@GYEON_official
7 ай бұрын
If you have the possibility to gentle clean the car with Q²M Bathe and give it a Q²M Cure application afterwards, all should be fine. Regards, Y.
@evangelospapagiannis6643
7 ай бұрын
@@GYEON_official Thank you soooo much for the awsome products and for the spot on support, i will do that emmeidiatetly, and will always have a Q2M Cure in my pocket 🤩🥲🤟🙌👏 Best Regards to all the Team.
@mateuszukasiak7675
2 ай бұрын
What to do when Skin starts to fail but Mohs is still ok? Clean, IPA + new SKIN ?
@GYEON_official
2 ай бұрын
If coating starts to underperform, a good decontamination and the use of Q²M RestartWash can already make a big difference. As a topper we recommend the use of Q²CanCoat Evo because as a standalone product it can be used on top of every coating. Besides that Q²Skin can’t be purchased separately as it always comes with the Q²Syncro set. Regards, Y.
@dcleboski698
5 ай бұрын
Can I use a coat of Skin after I apply CanCoat ?
@GYEON_official
5 ай бұрын
Q² Skin is not sold separate bit comes with the Q²Syncro kit but technically it can be applied over Q²CanCoat. Regards, Y.
@marcusbarnes5929
2 жыл бұрын
How does this compare to a silicon carbide opticoat pro plus ceramic coating ?
@GYEON_official
2 жыл бұрын
Up to you to decide, we test certain procedures and fixed protocols which are our benchmarks. As certain comparisons don’t make sense because there is no protocol or follow up and the amount of variables that can alter the outcome are just to much. Regards, Y.
@TheMstwntdLMSV123
Жыл бұрын
How long after applying Skin should Cure be applied?
@GYEON_official
Жыл бұрын
We advise to wait till the next day before the car goes out. Regards, Y.
@tylerhope752
2 жыл бұрын
Hi i just applied Pure evo to mazda 3, i still have lots left in my bottle, can i layer it?
@GYEON_official
2 жыл бұрын
Yes you can but I guess your window of application is already to late. Use the leftover on your wheels and doorshuts. Works fantastic and serves a purpose! Regards, Y.
@tylerhope752
2 жыл бұрын
Good idea, i will correct my door frames with my 3" polisher and coat them, and save the rest for a new set of rims
@BMan100
Жыл бұрын
Can this be used over ppf and trim?
@GYEON_official
Жыл бұрын
No, for PPF and trim we have dedicated coatings. Regards, Y.
@PMitchell106
Жыл бұрын
what is the shelf life of the unused product?
@GYEON_official
Жыл бұрын
You can find a lot of information on our website. Here you go: gyeon.zendesk.com/hc/en-us/articles/360000900758-What-is-the-shelf-life-of-your-products- Regards, Y.
@garydrews5491
2 күн бұрын
@@GYEON_official
@xCLUTCH99x
Жыл бұрын
Is Syncro safe to use on ppf ?
@GYEON_official
Жыл бұрын
We have a dedicated coating for PPF. I suggest to stick to that one to avoid problems and disappointments. There is a reason why we make dedicated products. Regards, Y.
@MichelOM1995
2 жыл бұрын
can I mix Wet Coat with wax gyeon?
@larrysing
2 жыл бұрын
Wet coat is a drying aid. You can use Gyeon Wax then when you wash the car, spray Wet Coat on when rinsing then rinse & dry as usual.
@MeliorIlle
2 жыл бұрын
That wouldn't make any sense at all. Use either or.
@GYEON_official
2 жыл бұрын
Mixing? Those are 2 completely different products that serve their own purpose. Keep the mixing for the kitchen 😉 Regards, Y.
@tonythetonester5223
2 жыл бұрын
how long gyeon syncro evo cure before expose to rain?
@GYEON_official
2 жыл бұрын
The longer, the better but at least 24h. Apply a thin layer of Q²M Cure to get that extra barrier for the first 3 weeks. Regards, Y.
@tonythetonester5223
2 жыл бұрын
@@GYEON_official Awesome thank you! Just to confirm again! So as soon I finished applied 2 layers and wait 24 hours and then apply thin layer of Q²M Cure, then the car would be fine to drive in rain?
@GYEON_official
2 жыл бұрын
Yes. Regards, Y.
@joelpasserell4525
Жыл бұрын
@GYEON_official I don't have Cure, but I do have Ceramic Detailer. After the first 24 hrs. can I top with CD instead of Cure for same water spot protection?
@GYEON_official
Жыл бұрын
Yes you can but Q²M Cure is the more performant solution. Regards, Y.
@user-rq3ow8kb3l
2 жыл бұрын
mohs and 1 hours later use skin?
@GYEON_official
2 жыл бұрын
Yes, same as before.
@marcellomonteleone4086
2 жыл бұрын
gyeon please reply if after mohs more than an hour goes by, say 24 hours? what happens? am I wrong?
@marcellomonteleone4086
2 жыл бұрын
I have syncro but maybe I was wrong. after mohs 24 hours have passed
@GYEON_official
2 жыл бұрын
It will rather reject the coating. Please read the manual as well. It is clearly explained what timeframes must be respected. Regards, Y.
@1stfrompuertorico568
2 жыл бұрын
1st
@joelpasserell4525
Жыл бұрын
Why doesn't Gyeon save its customer's a lot of headaches and update this video with a screen splash, saying not to apply SKIN immediately after, but to wait 1 hour between the MOHS application and SKIN? The 1 cm spot in the instructions that states that 1hr requirement could easily be overlooked & many people come to KZitem to watch the video, especially one made by the manufacturer to get the actual know how.
@GYEON_official
Жыл бұрын
It should not be a problem imho because after applying the first layer you are probably gonna be at 1h, so taking new towels and starting over again in the same sequence is the easiest thing you can do. Regards, Y.
@joelpasserell4525
Жыл бұрын
@GYEON_official True. The one I did took me right up to the 2hr mark. What should be done if I'm working on a larger vehicle that takes me 2.5 hrs applying MOHS to get back to the starting point? At 2 hrs, do I stop wherever I'm at & return to the start point to begin SKIN layer? But after finishing the coat of SKIN, then I would be starting MOHS again at a point where I just finished the SKIN layer. Do I blend the MOHS into the prior SKIN/MOHS section? Tough to do if you're a one person show and you have a big vehicle to do. I guess if it's going to exceed the 2hrs, I would have to hire someone to help me complete the coating in shorter than 2hrs. 😒
@GYEON_official
Жыл бұрын
There are people doing RV’s and large trucks with zero issues. In the end it all comes down to preparation and assessment of a job. Something we don’t sell unfortunately but if the second layer comes after 2,5 hours in normal environmental conditions you have nothing to worry about. Regards, Y.
Пікірлер: 88