This is my gun, and I took it out on Sunday and performed flawlessly and is by far my favourite gun haha 100% recommend the gun, and 1000000% recommend Negative Airsoft for all your work! ~Thanks again dude~
@rebeccanortje8285
3 жыл бұрын
What is the exact model of the gun?
@tom94r66
3 жыл бұрын
Jing Gong G3 Bought from Taiwan Gun
@egon2875
10 ай бұрын
I've just got one of these, the shorter version and it's got a quick change spring guide that flaps about like my ex wife's morals. Found an m6 cap head and a washer to fit and it holds it sweet in the casing.running 1.1j and awesome.
@maverickentity9341
4 жыл бұрын
As an old hand who has spent way too much failing to tech with an entire collection of v3 gearboxes (and has accepted to have fallen for the sorbo pad 14 teeth shs piston meme), thank you for this video and your efforts of bringing enlightenment. If it were not for how much I despise taking apart everything now I would be spending my weekends probably tossing out half of what I have done (I have a cyma ak105 that performs worst range wise than a cyma bizon despite same spring and other "upgraded" internals simply because I put a non ported cylinder in the bizon in a fit of madness). That trick with the gear positioning for reassembly is genius, I have always thought I had to have it positioned up at the point of contact all this time.
@TomRichJac
4 жыл бұрын
actually laughed when you said "alright" 🤣
@bubkacarlson9461
3 жыл бұрын
Do you know what gun was in this video? Was it the JG G3 or the Lct G3?
@bigboi2724
3 жыл бұрын
@@bubkacarlson9461 Its the JG G3 rifle
@Stephven69
4 жыл бұрын
I've got a new CYMA AK74U that I've also purchased a warfet for. It'll be my second ever time opening a gearbox and 1st time attempting a general cleanup and hoping I don't fuck it up monumentally. Guess you have to start somewhere.
@mikekal3390
4 жыл бұрын
Good luck my lad, you'll struggle assembling the trigger, be patient 😇
@Stephven69
4 жыл бұрын
@@mikekal3390 cheers. And hey, if I fuck it up too badly, maybe negativeairsoft will get some more business and an opportunity to roast my handy work!
@mikekal3390
4 жыл бұрын
@@Stephven69 Make sure to add some teflon tape and one of those sorbo pads 😂
@NickBrown-hw2yj
3 жыл бұрын
@@mikekal3390 and don't forget some superglue
@scon3s619
3 жыл бұрын
How did it go in the end?
@TehZoadi
4 жыл бұрын
Great tech. Learned alot from you. Now i have 2 custom builds that i did over quarantine.
@matthewbremner1146
4 жыл бұрын
You’re a fucking revolution. Thank you Luke. Not this specific video. Just in general.
@TutonWolf
4 жыл бұрын
I ordered this exact gun a few days ago for dirt cheap - Super pleased to see a video from you getting your hands inside it, needless to say, proper moist for it now - Thanks for the cracking content
@lilpettyxbigdiesel9387
4 жыл бұрын
Me too, pleased with mine. Cheap and cheerful
@dylanwatkins8968
4 жыл бұрын
I’ve probably invested 10+ hours watching your videos All because of one little shoutout from airsoftolagy
@WazheadBoci
3 жыл бұрын
same
@CinnamonCanine
2 жыл бұрын
Quality choice in tunes mate love it. Your humour always slaps a smile on my face. Thanks for the top content 👌
@NefariousElasticity
4 жыл бұрын
I love those AR latch clips. I first saw them years ago and then made a file to print them on my 3D printer, so I keep loads in my toolbox just in case one breaks, gets lost, or someone at the field wants one.
@chrisberry3048
4 жыл бұрын
Love this guy. He is like every squaddie mate I ever had
@uazfoursixnine
4 жыл бұрын
Yes! More of this kind of videos. Full of good tips; great work man!
@Lars_Christensen
2 жыл бұрын
Good stuff! Always love watching your videos. Just the right ratio of information and banter/ranter. One thing I'd love for you to go into just a bit of detail on is the whole shortstroking. It's something I just can't seem to wrap my head around. When do you do what? Like in this case you took 1 tooth due to the rifles power and cycle state (Semi only) When do you know to take how many teeth and from where? Whenever you got a build dealing with this again, it'd be awesome to just get bit more detailed story on it. Thanks again and keep rocking!
@easttexasairsoft4319
2 жыл бұрын
A little late and not the best info, but I found something for you
@mrpugster
4 жыл бұрын
Nice job. Noticed the test grip and motor you got on the table, good stuff
@hawaiiairsoft8087
4 жыл бұрын
Aloha Negative Airsoft, or is it now positive airsoft? Great video Braddah!😎🇺🇸🇬🇧🤙
@neilllockett7950
3 жыл бұрын
Great video used this to turn my secondhand G3 into a DMR. Keep them coming top work.
@Yfr28
3 жыл бұрын
What I found really works well when putting the shell back together is one of those dental poking tools and a magnet holding the AR latch
@eikka492
4 жыл бұрын
"Fuck off" vs. "Please like ans subscribe, click the bell icon etc. etc." I love it.
@YEinherierY
4 жыл бұрын
What I like to do is giving the gearbox some really light taps with the back of a screwdriver. The gears, arl and trigger will slide In in 9 Out of 10 cases.
@lepyZG
4 жыл бұрын
hey can you please do a video about hop up, how to properly position them, feeding problems ect. Thx
4 жыл бұрын
At 9:50, when you talk about something at the very back not allowing the case to close, I found out with longer/harder springs is that the piston is usually not aligned with the tracks in the case.
@Carsonsimon
4 жыл бұрын
I like to put a thin screwdriver in the hole at the rear of the spring guide and let it rest on the table when putting back together. Reduces the chances of the spring pushing the spring guide up and out of the gearbox when its only being held on the one side... Especially when using heavier springs...
@enidpuceflange
4 жыл бұрын
@negative airsoft I just ordered one of these G3’s , waiting on it arriving Was thinking of doing a DMR build with it Perfect timing, thanks for your video Now fcuk off 🤣😂
@ghostwalkerairsofttech1947
4 жыл бұрын
if your in the US you wont need to shave off that sector gear tooth, depending on your field limits. The G3 is a DMR, its supposed to be high power. I think he only did that to reduce the amount of travel on the piston thereby decreasing the power I can't see him doing it to increase ROF or trigger response since both were great in the first place. Luke is in the UK where they have insanely low limits for guns of this type. I personally prefer to tune the spring down by cutting 1/2 to 1 coil at a time from the spring guide end of the spring. To each his own.
@shakkaclacka9150
4 жыл бұрын
awesome video man! love your vids, i'm a big fan from australia. I research alot of airsoft as i build and repair gel blasters which are the exact same set up mechanical wise being v2 and v3 gearboxes. Only real difference is hop unit, nozzle and mags. Gelball techs have alot to learn. To make a retro arms gearbox work with a 7mm gel ball is a complete prick to adjust tappet stroke for feeding and compression from 6mm. Hurry up and just give us airsoft.... Keep up the great vids i really enjoy watching them!
@ArchieKeen1
4 жыл бұрын
Proper job, the first gun I worked on was the JG g3, probably the easiest to take apart, those stock motors are god awful, mine had a square port in the cylinder lol
@funthingsartillery3563
4 жыл бұрын
Nice vid man, More like this pls ! Thumbs up
@noXza_
4 жыл бұрын
Thanks for the awesome content, loving it!
@gabrielchcosta
4 жыл бұрын
11:40 sounds great! snappy too
@marcallnutt7061
4 жыл бұрын
Awesome work as usual 😎 gotta love a G3 😍
@ericgao5236
4 жыл бұрын
The background music is great
@TheCobracan
4 жыл бұрын
Again good job woman 👏🏻👏🏻👏🏻
@Impz-cz2de
3 жыл бұрын
I Just came across your channel and I love your videos and humour!. I have a STOCK TM416 I want to get upgraded this summer, BUT there is NO verified TM dealers or shops that works on TM so I have to send it overseas. What would you recommend for upgrades?. I want a Titan mosfet, But as im new to Airsoft, and have no friends or clue what to do, and what not to do I figured I would ask you for advice :). Cheers from Norway!.
@ghostwalkerairsofttech1947
4 жыл бұрын
that gun sounds sweet with that other motor...Ihave the gbbr version of that gun, makes me want the aeg now.
@dadocles3506
4 жыл бұрын
Great tips, man. Thanks
@viktorpenc9035
4 жыл бұрын
Great video, but I'll ask, why do you use the ARL clip instead of a magnet? Like yeah, I wouldn't use it on a gun with advanced electronics inside, but can't do much harm to trigger contacts I'd say...
@patrikpape5768
3 жыл бұрын
"stops working on aep-gearbox". fuckin A music again mate! "continues trying to reassemble this FOKIN gb"
@wolflittlepsycho3437
4 жыл бұрын
Hi, i love your videos, they are honest and filled with experience. I was competetive shooter with airguns for long time, i played airsoft when i was kid (we had mostly manual plastic crap rifles and when i got first AEG it was P90, hopup was more of an exotic word than feature for us :D ) I would love to get back to airsoft, is there any good starting weapon for future upgrades? I would like something for mid to long range, ppl around me are mostly playing CQB (not speedsoft tho) our limit is 130m/s indoors (Czech Republic, we have huge milsim outdoor operations once in a time with crazy FPS) I was checking Specna Arms and E&C metal bodies (they are common here) the only thing i would love to change in future (not mentioning better piston, seals, etc.) is the trigger pull, as i am used to sport airguns, the airsoft stock pull is ultra long for me. Thank you for any ideas. BTW i own a workshop for forging and i have basic machinery like lathe, drill, hydraulic press, etc.
@danielfrench2332
4 жыл бұрын
That sounds beautiful oh my god. 🤤
@bazookabill3081
3 жыл бұрын
Having just purchased this same RIF what would be the cost of getting this done please
@ernstmeijer3067
4 жыл бұрын
Like the vid and the Music and the cursing
@chaptermastermoloc7331
4 жыл бұрын
Hi, so I'm looking to get a Krytac Lvoa C and due to the rules at the field I play at the limit the fps to 360 so I already know that i have to back it down any tips on which spring I should get to do that?
@rickydicknut6352
4 жыл бұрын
I just bought myself a CYMA M14 EBR I would like some more accuracy and distance. Trigger response isn't a concern. What suggestions would you have? Is there anything about the GB or hop-up you have issues with?
@Brindles69
4 жыл бұрын
Nice vid as always! Out of interest, why did you take a tooth off the gear instead of cutting down the spring to adjust the FPS? Keep em coming!
@NegativeAirsoftTech
4 жыл бұрын
Because I knew the drop would be perfect, cutting the spring isn't as precise
@Brindles69
4 жыл бұрын
@@NegativeAirsoftTech Thanks!
@darkhart1275
Жыл бұрын
It's also very wise to learn from other peoples mistakes, because obviously you have had to un Fuck other peoples work.
@BushWackingHomestead
4 жыл бұрын
I know this might seem stupid and there are better options than a Gate Titan but can you show us how to fit a Titan into a V2 Krytac gear box and what to do to get it to fit?
@billstrachan4531
4 жыл бұрын
I use silicone oil as lubricant for cylinder head o-rings and piston head o-rings, should I be using grease? I'm not a pro at this stuff
@The_future1991
10 ай бұрын
witch hop up rubber and Nozzle lenth is installed? YOu show a spare part on the table but didnt use it in the build
@NegativeAirsoftTech
10 ай бұрын
Yeah, I'm a dick like that.
@mikewolloschek5107
4 жыл бұрын
What type of grease do you use for what part? Im USE Breaktrough silicon thing for almost everything
@jackfwoodward
4 жыл бұрын
Couldn't come at a better time when my WE Mk16 AEG is in bits across the room
@Gumball935
3 жыл бұрын
I wonder where can I find those red clips
@azimuth9751
3 жыл бұрын
that gun is so long, his voice sounded like he had to get up and walk to the other room in order to get the barrel pointed into his chrono
@toasty_topaz
4 жыл бұрын
What grease do you like to use and what is used to clean off the gears and gearbox?
@mcparis3586
4 жыл бұрын
"uuuhh Fuck" XD
@dainiusvysniauskas2049
4 жыл бұрын
Anti-reversal latches are M A S S I V E C U N T S
@qwertyqwrtyqwertyuio
4 жыл бұрын
I currently have a Specna SA-E01, would you recommend keeping the stock bearing bushings or replace them with standard bushings for longevity?
@NegativeAirsoftTech
4 жыл бұрын
Replace to be sure. It's the bad shimming that blows them normally.
@qwertyqwrtyqwertyuio
4 жыл бұрын
@@NegativeAirsoftTech Ah okay, that's what I was thinking. I reshimmed the box but I may as well get those replaced. Cheers.
@mre.w.2850
4 жыл бұрын
Going to regrease my specna arms the only stuff I have is the bisley gun grease i use on my shotguns, will it harm or work as well as silicone gresee
@NegativeAirsoftTech
4 жыл бұрын
I wouldn't....
@carbzlaw
4 жыл бұрын
An E&L an internals review is very much appreciated thanks
@metsat8ll
4 жыл бұрын
is there a difference between removing a gear tooth from the pickup side vs from the other side? nozzle position?
@viktorpenc9035
4 жыл бұрын
Yeah, I think it will fuck with your nozzle (tappet plate) timing.
@djrio1987
3 жыл бұрын
you need do hpa lol so can send mine too you too get cleaned and somethink done too my m4 body lol
@bigrig8539
4 жыл бұрын
Is the cyma cm0.97b a good m4? It seems really nice.
@mikemahon4472
3 жыл бұрын
When you remove a tooth from the sector gear do you remove the pick up tooth or the release tooth
@NegativeAirsoftTech
3 жыл бұрын
Pick up
@kippiekipzz
4 жыл бұрын
Where can I buy that clip for the anti reversal latch? Haven't found them so far.
@kippiekipzz
4 жыл бұрын
Nevermind, found them 😁🙈
@SirClicks.
4 жыл бұрын
Can anyone tell me what that clip is for and where to get one?
@olegshishkarev3028
4 жыл бұрын
What grease do you use for gears and for piston?
@nisaim6599
4 жыл бұрын
what grease should be used on the gears & piston?
@b00bzzzzz
4 жыл бұрын
hi whad did you used to hold anti reversal latch?
@mlog24
4 жыл бұрын
I would like to know too....what was that clip
@GammaAirsoft_Gaming
4 жыл бұрын
mlog24 I think air tech studios makes it
@mlog24
4 жыл бұрын
@@GammaAirsoft_Gaming thanks ill check it out
@sevenn
4 жыл бұрын
colossal is crazy of airsoft
@blackwidowairsoft4301
4 жыл бұрын
Question: If my gun is shooting 398 fps with .20 and I remove 3 teeth will I get it down under 350 fps with .20?
@mlog24
4 жыл бұрын
Get a lower spring
@NegativeAirsoftTech
4 жыл бұрын
@@mlog24 either works, pro's & cons on both sides
@blackwidowairsoft4301
4 жыл бұрын
@@mlog24 I just want to short strok the gun to Get a better triger respond.
@NegativeAirsoftTech
4 жыл бұрын
@@blackwidowairsoft4301 there's your answer :-)
@Vytac
4 жыл бұрын
airsoft's gordon ramsay
@meccanica3754
4 жыл бұрын
Jg or lct
@timon1463
4 жыл бұрын
F**kin mozart of airsoft 😂
@knightmorrigan9480
4 жыл бұрын
Rip Camera :O
@andrewrena3940
3 жыл бұрын
6:00
@DgR1716
4 жыл бұрын
How do I get the pleasure of having you work on my guns if it is possible
@NegativeAirsoftTech
4 жыл бұрын
Email or facebook
@cmarriott3835
4 жыл бұрын
Bum sausage
@jwairsoft9846
4 жыл бұрын
At at 🤣
@steveshot81
4 жыл бұрын
This gun is shit out of the box.I HPA mine
@NegativeAirsoftTech
4 жыл бұрын
It's quite good, this one had a greasy hard rubber
Пікірлер: 111