The helmet of the mando that help attack the jedi temple looks cool would be pretty neat to see him make that
@GalacticArmory
4 жыл бұрын
Great idea!
@connorl497
4 жыл бұрын
Shae Visla. I agree great idea
@bradylowdon
4 жыл бұрын
Definitly!
@Jester0153
4 жыл бұрын
@@GalacticArmory PLEASE DO THAT
@Kitsunemel
4 жыл бұрын
Do it!!!
@zachaboy
4 жыл бұрын
Lore wise the havoc troopers could go toe too toe with sith as seen in the cinematicatic. In the universe of the old republic they could literly box against a wookie to get stronger
@concordsabre5723
4 жыл бұрын
They put clone troopers to shame!
@zachaboy
4 жыл бұрын
@@concordsabre5723 yeah they did it would probably take the combined abilities or rex,cody'five,echo,jesse,waxer, and boil to get one if these guys to go down
@arranroberts1463
4 жыл бұрын
The_CoolGamer that’s because legends doesn’t take into account existing lore
@PRRepublicOfKorea
4 жыл бұрын
@@zachaboy , don't forget. They can also do that to Sith.
@zachaboy
4 жыл бұрын
@@arranroberts1463 legends existed before the Disney era so it does actaully use existing lore because it was George Lucas original concepts
@vaultfox
4 жыл бұрын
congrats on doing this as a full time gig! love your stuff, I'm working on a Captain Rex from your files right now.
@BucketHeadFilms_
4 жыл бұрын
Man I always did love the old republic the helmet looks great!
@catandogclone7880
4 жыл бұрын
I watched you dropping the visor 15 times and didn’t even flinch
@IzzcanV
4 жыл бұрын
As I have said a hundred times already, I find it very very impressive what you do there and that you quit your job to do this full time shows that you really are wholeheartedly involved. Carry on so we are always behind you!
@MrSpartan99
3 жыл бұрын
Idk if you get told enough, but your a great person! Making all the part and pieces available rather than just being like if you don’t have a 3D printer than that’s too bad
@templarlord5386
4 жыл бұрын
Wish you the best! And congrats from leaving your job! I know it sounds counterintuitive, but I wish I could quit to follow my dream job! :) "We shall follow your career with great interest"
@wingding0111
4 жыл бұрын
Will you do a clone commando helmet?
@thilensavignon1999
4 жыл бұрын
Oh yes ! That would be sooo cool !
@ChrisRoberts01
4 жыл бұрын
He already did, look on his website
@Bass-ef3dr
4 жыл бұрын
@@ChrisRoberts01 he means for a video
@nikolaspapanagnou2723
4 жыл бұрын
Will he does a Jesse helmet from clone wars 7.
@KingJake-om7yq
4 жыл бұрын
Hopefully yes
@EASUndertaken
2 жыл бұрын
The fact the the Havoc troopers have no problem rushing into an army of Sith Warriors
@yab6806
4 жыл бұрын
Putting your recommended 3D printer, filament, and other materials in the description is a legendary move. Thank you!
@ColesHobbies
4 жыл бұрын
You did it again. Absolutely amazing video! Thanks for sharing your prop making experience with us!
@LeonidasSparta-Fun-History
4 жыл бұрын
I LOVED the old Republic online RPG. One of the best games ever!!!
@thilensavignon1999
4 жыл бұрын
Is the game still alive ?
@LeonidasSparta-Fun-History
4 жыл бұрын
@@thilensavignon1999 it might be, I haven't played it for like, 3 or 4 years.
@jonlittle810
3 жыл бұрын
would love to see that in a full suit,,,, the orange shoulder board would look awesome in tactically in control ect.. like in episode 4.. 1st time you see him.. MOVE ALONG-MOVE ALONG.....That guy
@bradylowdon
4 жыл бұрын
I was mad when I heard they were making a sequel trilogy, butttttttttttttt... *EPISODE 0.1, REVENGE OF THE REVAN*
@Liam-nv3zt
4 жыл бұрын
Damn I clicked so fast when I got the notification.
@generalkenobi3716
4 жыл бұрын
Just bought your ROTS clone armor files two days ago and I'm loving the parts I've printed so far!
@howitzer4041
4 жыл бұрын
THE KING IS BACK WITH ANOTHER ABSOLUTE BANGER OF A VIDEO! LOVE IT
@kalbricks8113
2 жыл бұрын
Building this right now. Great design!
@joshc5339
4 жыл бұрын
I have made four helmets now and tried a bunch of different methods to smooth the parts, I used wood filler on my last one instead of bondo and it worked really well!
@jackdewitt9811
4 жыл бұрын
We support you man! Way to go taking that step. We got your back.
@TheSeano1
4 жыл бұрын
I love watching your builds, they always look great, and you're so informative on how to prep! Currently printing one of your Phase 2 Animated Clone Trooper Helmets, going to paint it 332nd style. Then I'll buy your Phase 2 Animated Clone Trooper Armour files (I'm the one who asked if it's possible to have the knee and elbow armour seperated!) Congratulations on starting your own business, too!
@dr4c077
4 жыл бұрын
This is the coolest custom prop i have seen
@gonkdroid7207
4 жыл бұрын
I just finished my first clone helmet( commander gree ) thank you for the inspiration
@BlatantlySwedishPGN
4 жыл бұрын
I love these videos! I have a part of a FO Stormtrooper helmet laying around that I haven't gotten around to finishing. I don't really feel comfortable setting up a super long print as I'm still worried it'll fail. I've only had my printer for a couple weeks by now. I do wish I hadn't printed it in smaller parts but at the same time like I said I don't want to do several 40-hour prints and stuff.
@riverhermit5257
4 жыл бұрын
After watching your videos I went and tried spot puddy and it makes the biggest difference in my mando helmet I printed.
@oldnexus4782
4 жыл бұрын
You never cease to inspire and amaze me ngl
@Jester0153
4 жыл бұрын
I feel like TOR doesnt get as much love as it needs. Probably my favorite trooper armor is the Havoc trooper.
@fizzy4877
4 жыл бұрын
yes, havoc squad! the special forces of the old republic. people mistake these guys as the regular republic troopers, but the regular ones usually have orange markings
@tankkiler308
3 жыл бұрын
So are we gonna get 3d files for the armor as well at some point? Or do you have existing armor plans already that work?
@benwallis2047
4 жыл бұрын
I love this channel so much
@simonsaldana9024
4 жыл бұрын
Yoooooo! Congrats on becoming a full time content creator! And good luck! Not that you’re going to need it, it’s hard to foresee a future where your incredible content doesn’t succeed. But still, good luck.
@neofulcrum5013
4 жыл бұрын
Man old republic troopers were so cool looking
@mr.m2556
3 жыл бұрын
Great looking helmet. I really like the visor on this one. You can use rubber cement instead of liquid latex as a cheaper and more available option.
@paullinn1405
4 жыл бұрын
Very nice work ! Enjoying your work
@tobiasbreitkopf1668
4 жыл бұрын
Hi, I just wanted to leave you a little thank you, I have wanted a clone armor for forever. and thanks to your channel and your files I am on my journey to one. I had my doubt cause I wanted to make rex, but I saw yesterday the new files. I'm hoping ill get approved since this is the first time I do something like this. So yea Thank You
@GalacticArmory
4 жыл бұрын
Thank you for the kind words!
@golfdude20
3 жыл бұрын
I would love to have a full set of clone trooper armor or Old Republic Havok Trooper armor! This would be the coolest thing in the world to have. I just don’t have the skill or money to complete these projects.
@sweetjabe7765
4 жыл бұрын
Looks fantastic, would be so cool to see the full set of armor
@ansonhynek1180
4 жыл бұрын
Congratulations on doing this full time I love your helmets
@Chubstrrrr
4 жыл бұрын
You're a big inspiration for me to not slack during the first semester of middle school so i can get a 3D printer to make helmets of my own
@ryzer_red
4 жыл бұрын
Great Job! I loved this game so much.
@CloneShockTrooper
4 жыл бұрын
Absolutely beautiful
@lukealdieri5045
4 жыл бұрын
Great work! I love the design of the havoc troopers. Loved the video!
@williamkarels4402
4 жыл бұрын
Loved the video! Keep up the great work!
@GalacticArmory
4 жыл бұрын
Thanks so much!
@buggzyai9550
4 жыл бұрын
Love this helmet
@omega3120
4 жыл бұрын
I would love to see another video with your Coruscant guard officer armor
@KristianB07
4 жыл бұрын
Hey, I’ve always loved your helmets... but your missing a big one! The Stormtrooper! I’d love to see one!
@owenreynolds9599
4 жыл бұрын
Definitely one of the most underrated helmets in star wars, gives me clone commando vibes
@sithacolol5337
4 жыл бұрын
Would love to see this with green markings instead of orange! Awesome work! Maybe regular old republic trooper helmet next?
@elijahhudgins7579
4 жыл бұрын
You should make a Phase 1.5 ARC Trooper, I haven't seen them be made anywhere else and they're my favorite helmet!
@antiqueashes
4 жыл бұрын
I was wondering if you’re planing on doing a season 3 animated Arc Trooper helmet? I want to get into the 501st as Arc Trooper Fives, but the Clone Wars arc troopers in season 3 have the more animated style visor, and the fin is like the animated phase 1.
@GalacticArmory
4 жыл бұрын
Eventually yes!
@antiqueashes
4 жыл бұрын
Galactic Armory Awesome!
@Joel-he3by
3 жыл бұрын
I want to make a full set of this armor now!
@angelsgames4352
3 жыл бұрын
Hi, I just bought your stl file. How much infill do u recommend and your helmet looks bigger then 100 percent... how much higher did u go up for this helmet?
@error404civicnotfound
4 жыл бұрын
Can’t wait to watch this!
@rubenlanting5822
4 жыл бұрын
Super dope looks like the clone commandos super Nice helmet
@Dookysoft
4 жыл бұрын
@Galactic Armory about how much filament does it take you to make a full helmet? And awesome video the helmet looks amazing!! Keep up the great work!!
@jbenefield2897
4 жыл бұрын
Yes thank you for making this but just asking with your custom orders are they 3d printer blue prints or do you actually do it yourself and send them in
@bosspig746
4 жыл бұрын
You’re patreon rewards are actually really cool like helmet downloads whoop
@Fives-ch1eo
4 жыл бұрын
Idk if this would be too much work since you're already making vids, but I feel like if you did commissions that would bring in some good extra dough
@Kamelg
4 жыл бұрын
This is just too awesome! You good Sir are a Master now ^^
@toastedtoast5853
4 жыл бұрын
Hey I watched your 501st video and noticed your awesome Kama! I'm making a Rex cosplay out of EVA foam and I was wondering how you made your kama, especially with the red outline since rex's has a blue one.
@Firebear31
4 жыл бұрын
Would you recommend both bondo and filler primer or can I just use 2 or 3 filler primer layers instead?
@special_k_2784
4 жыл бұрын
You're outstanding my man
@nickos079
4 жыл бұрын
This is soooo beautiful!!!
@samturpie1756
4 жыл бұрын
What sort of padding do you do on the inside so it’s comfortable? Or do you even do that?
@kazanth
4 жыл бұрын
just purchased this file and stating it today are you going to make a commander bacara stl. available to buy? keep it up and you are an inspiration by following a dream.
@musicman12395
4 жыл бұрын
What program do you use for 3d modelling out of curiosity? I'm beginning to experiment with it myself and I'm not sure where I should invest my time
@SparleR
4 жыл бұрын
forsen1
@MetalholmStudios
4 жыл бұрын
5:13 Yo, is that a spoiler in the background?
@bradylowdon
4 жыл бұрын
Yes my good sir! Its actually on his shop
@bratuhin
3 жыл бұрын
Hi! I'm a big Star wars fan!!! Everything you do is really cool! Can I buy a collapsible helmet, and I have already painted and glued it myself?
@Sam-pu7rt
3 жыл бұрын
Will you be making the full armor?? Would love to get this.
@FireFox95-n9k
4 жыл бұрын
Will you do the Havoc squad battle armour?
@admiralsilver8290
4 жыл бұрын
I recently came across your video of PLA vs. PETG, how has PETG been working for you in tests?
@gorfgarf9735
4 жыл бұрын
Hey guys. Great video Bru. I'm gonna buy my first 3d printer but the one recommended is not available. I'm looking to do those kind of big piece and figurines. Got any suggestion? Ty
@frog6375
4 жыл бұрын
You should do a full helmet collection vid
@morruec3583
4 жыл бұрын
I'd love to see the clone engineer helmet from the old Bf2 game!
@flamedino1213
4 жыл бұрын
Could you do a video on different 3D print finishing methods? I notice that you slightly change it every time. Thanks!
@wyattclove5524
4 жыл бұрын
Not proud to say when he dropped the visor I cried
@2014Quinn
4 жыл бұрын
What size print bed is needed? I want to buy a few helmets, but I have a Mega-S. Only got about 8" cubed
@daxburnett3313
4 жыл бұрын
what is a normal print time for your helmets no matter how i slice them im getting 6+ day print times should it take that long?
@andrewknight1036
4 жыл бұрын
Can you or have you made a standard storm trooper helmet? I know it’s probably boring, but I love them. Great video once again!
@TheIntestinal
4 жыл бұрын
hello, when do you enxpect the clone phase 2 helmets to be able to be shipped again? is there a way to be notified if its available again?
@dr4c077
4 жыл бұрын
Hei Galactic Armory, are you using hexagons for your infill, hexagons 120 degree corners are powerful
@zeravack8234
4 жыл бұрын
This is cool
@memesredacted
3 жыл бұрын
The real reason the old republic troopers look so similar to clone troopers despite the inspiration of the clone armor being the mandalorian armor of Jango Fett, it was an oversight on the production teams end.
@cooperbrack1894
2 жыл бұрын
i would love to see a full set of armour from the old rebpublic.
@KristianB07
4 жыл бұрын
Amazing!
@robotassasin4916
4 жыл бұрын
Making a mandolorian helmet would be sick
@ErikLeone
4 жыл бұрын
Any chance you would do the jedi or Sith armor from the old republic games?
@blackhawk3975
4 жыл бұрын
You should make the Galactic Armory helmet next!
@sashali6666
4 жыл бұрын
I think you should also try the SCUBA trooper from Clone wars
@aidangansen939
4 жыл бұрын
Hey there I just purchased your ARC Trooper file off your website and was wondering how much filament do these projects usually use? Thanks
@GalacticArmory
4 жыл бұрын
It depends on your print settings but usually 1-1.5 kg's of filament
@aidangansen939
4 жыл бұрын
Galactic Armory thanks what’s your recommendation on print speed?
@onerian8178
4 жыл бұрын
will you be doing the old republic havoc trooper armor?
@andydandy8525
Жыл бұрын
would love to see either a sith empire trooper helmet or a republic infantry helmet.
@Deuce_and_a_half
4 жыл бұрын
6:26 Does this mean you would consider going into other franchises? I haven't seen many DIY Halo helmets available. Maybe you could tap into that market? There are tons of helmets in Halo Reach. And I'd love to see a regular marine's helmet too. Good luck!
@GalacticArmory
4 жыл бұрын
I would LOVE to do some Halo stuff!
@Deuce_and_a_half
4 жыл бұрын
@@GalacticArmory Hey thanks for replying! That's something I can look forward to seeing in the future then :D
@big_burke_0472
4 жыл бұрын
Can we see an ATRT driver I know you do a lot of clone wars but those files would be unreal
@scytho_1847
4 жыл бұрын
Not gonna lie but i would buy the rest of the armor set if you sold them :) love your work!
@MandoDaras
4 жыл бұрын
Very good work but why orange ,in the cinematic their helmets are red no ?
@noahgrubb8383
4 жыл бұрын
What kind of 3D printer do you use and where can I find one for a decent price
@stevenday1514
4 жыл бұрын
Since you’re doing a classic BF2 501st jet trooper, you should try a modern BF2/Clone Wars jet trooper!
@lingonett340
4 жыл бұрын
Is it possible to cut the helmet into even smaller pieces if you dont have a really big printbed?
Пікірлер: 301