Your setup is like a oasis I watch most pool vids yours is neat n tidy Luv from Barnsley yorkshire xx
@rtrbrown
3 жыл бұрын
I would love to c ur video on how u made the foundation and ur drink table.
@rhdtv2002
4 жыл бұрын
Nics job sir...im gettimg a professional pool so I'm looking at your design around it..i like it
@staceyfivecoat7097
4 жыл бұрын
Love all the pretty plants! Great video, thanks for sharing
@kathyreeves8853
4 жыл бұрын
I upgraded to a 1500 gph pump its reduced cost of chemical, filters, the water is crystal clear . Just replaced seals ,orings running great 3rd year. Pool size 15 x 48.
@alfonsolopez4179
2 жыл бұрын
I like what you did with the plants around the pool asowm vibe 👍
@PedroRodriguez-kb1ey
4 жыл бұрын
Love your video, great ideas, we just bought a pool and are definitely enjoying it but looking at doing some personalization to it
@emeresbestres1
3 жыл бұрын
I'm surprised you don't have a Sand filter with all these gadgets. Well worth it.
@eus013275
5 жыл бұрын
Please give me some advice about leveling the ground before u put down the pool Since Your pool look perfectly levelled
@mrs.torataylor1569
4 жыл бұрын
i did mine myself. it wasnt leveled at all. but it lasted all summer last yr. i took it down and gonna try to do it again for this yr..
@jwyatt110
4 жыл бұрын
Make sure your lands flat!!
@floraalquiciramurillo178
5 жыл бұрын
Wow!! You did an awesome job! I hope my husband can figure something out with our pool.
@joshua2quisenberry975
4 жыл бұрын
I was your 100 subscriber
@salsammy37
4 жыл бұрын
Love the set up definitely going to do the waterfall
@jmcconathy
4 жыл бұрын
Jared, do you have any information on your piping, size pipe, connecting to pool in place of flex pipe? We are considering getting one, 18'X52" is the thought right now, and I like the idea of the hard pipe and valves
@jaredowens3758
4 жыл бұрын
I would recommend using pipe that is the same size or as close as possible to the flex hose that comes with the pump. The flex pvc is a lot more expensive than straight pipe but I found it helped in not putting any addt’l stress on the built in port holes on the side of the pool.
@penniesfromheavon
2 жыл бұрын
Save yourself a lot of work and invest in a sand filter. You can use your existing piping so you don’t have to take it down.
@ariannnamarin7411
3 жыл бұрын
This is beautiful.
@gasca22
4 жыл бұрын
What size PVC and flex couplings did you use for your set up?
@cd2659
4 жыл бұрын
It looks amazing! Nice ideas.
@GenZod80
5 жыл бұрын
Do you make this so you can easily take it apart for the winter?
@jaredowens3758
5 жыл бұрын
No, we live in south Florida, winter here is mire like a mild summer. The original flexible pipes of the original pump/filter system stated to break and the original pump system didn’t include valves. Without valves cleaning the filter was a pain.
@rafaelmichel445
3 жыл бұрын
Prepare for bugs in your pool with all those palm tree
@jeremiahrios4010
3 жыл бұрын
Watching and learing.
@joepor4265
4 жыл бұрын
hi i just got a new bestway pro steel and i like to ask the long steel that sit on the ground has a hole on one side ...anyone knows for what? as i do not have and holes in the fitting that connect with the round one on top and nighter pins for it..
@jaredowens3758
4 жыл бұрын
Not sure
@rosew6184
5 жыл бұрын
Great job! Pool looks nice!
@leonreid5665
4 жыл бұрын
Awesome job...thanks
@pinkpantspro7170
4 жыл бұрын
What size PVC did you use to actually connect to the existing ports on the side of the pool?
@jaredowens3758
4 жыл бұрын
I’m working from memory as we moved and no longer gave the pool. I think I was able to slip 3/4” pvc through the factory ports. I wanted to find some cut in type of ports but never was able to locate them. That would have even worked better by allowing more volume. I’ll try to find the link to a video I watched which was what I was wanting to do. It was very well done.
@jaredowens3758
4 жыл бұрын
This was ultimately how I was planning on changing the plumbing in the pool. Parts were out of stock every time I went to order them. kzitem.info/news/bejne/1YSpv459aYVimZg
@gdougie2080
4 жыл бұрын
Any links to the sprinkler set up pump ?
@justinoneill867
4 жыл бұрын
Do you have a video on converting to the new pump? I recent bought an upgraded pump but the hoses don’t line up.
@jaredowens3758
4 жыл бұрын
I don’t. I can tell you a spent a bit of time and a few trips to the hardware store. I also found the rubber type couplers that use metal hose type clamps were very useful.
@kathyreeves8853
4 жыл бұрын
Get in touch with VMinnovations they have everthing ,good company good $.
@susanpidgeon9683
4 жыл бұрын
Great job!
@tikitorturedmf
2 жыл бұрын
Don’t the trees make it hard to brush the sides?
@natalafray7858
5 жыл бұрын
Wonderful job
@DeeDee_Bean
3 жыл бұрын
This is excellent you need to do an update
@harvesfesting
4 жыл бұрын
Can I have the dimensions for the pvc table? super awesome.
@jaredowens3758
4 жыл бұрын
I’ll try to to do this this weekend.
@janineberger2042
4 жыл бұрын
Did you ever get the dimensions for the table ?
@shaun2312
4 жыл бұрын
How are you heating the pool? I have a bestway heater and it does nothing
@jaredowens3758
4 жыл бұрын
No heater other than good ole south FL ☀️
@katherinedetres5507
4 жыл бұрын
Is that a little shade for some parts of the pool?
@jaredowens3758
4 жыл бұрын
Yes, we had a patio umbrella next to the pool.
@yolandatullos3123
4 жыл бұрын
Do you have the link for leveling the pool legs?
@jaredowens3758
4 жыл бұрын
I made a hoist very similar to this one that Jack N Boots made and it worked extremely well very easy. Credit Jack N Boots kzitem.info/news/bejne/qmZ50a2aZpqVgKQ
@hawkeire2414
4 жыл бұрын
Dude with the basic filter you get with the pump you where complaining about water gushing out of the filter anytime you cleaned it or change the filter, Well you know there are two black plugs you get with the pool/filter and there purpose is for the problem you talk about to simply plug the pump holes from inside the pool when changing the filter lol.. Great work anyway.. looking good.
@jaredowens3758
4 жыл бұрын
Technically there are three plugs. At first I used them but found it silly that you have to loosen and remove the inlet debris screens (2 of them) and the supply jet to order to insert the plugs. The larger pumps come with valves which takes far less time and effort. Unfortunately the factory pool penetrations on that size pool are to small for Bestway or Intex brand valves. So I improvised... also, I’ve never been one to leave simply leave well enough alone... lol The “Tim Allen” in me often comes out, I think it’s most severe around full moons... 🤓
@theresadowns3260
3 жыл бұрын
You should turn the noise off before you try to explain things I didn’t understand half what you said
@josemata7394
5 жыл бұрын
How much for two tables
@jaredowens3758
5 жыл бұрын
Jose, I’ll make a parts list for you if you’d like. You can make them pretty cheap.
@josemata7394
5 жыл бұрын
Ok that’s fine
@alecheamora3853
5 жыл бұрын
I’d like the parts list also
@BLOODYFT
4 жыл бұрын
Could you post it in a reaction under here? I'd like them aswell!
Пікірлер: 65