Carbon brushes, are the operating part. Their function is to carry an electrical charge. They are constantly in motion, which is the main reason for their gradual wear.
The brushes affect the correct operation of the machine's motor, so it is important to remember to check the wear condition of the brushes and replace them regularly. Whenever there is any worrying operation of the machine, it is always a good idea to check their degree of wear and their correct position and replace them if necessary.
CHANGING THE CARBON BRUSHES IN D21 & R125 POLISHING MACHINES
1. Prepare the carbon brushes, cross screwdriver and a slot screwdriver.
2. Using the cross screwdriver unscrew the cover.
3. Take it off with a slot screwdriver by prying it.
4. Gently move away the pressure-spring of the brush.
5. Carefully remove the carbon brush and insert the new one using a slot screwdriver.
6. Place the cables so that they do not stick out, and put on the brushes pressure-spring.
7. Put back the cover and screw it on.
8. Turn the machine and repeat all the steps on the other side.
9. Unscrew the cover with a slot screwdriver and pry it.
10. Gently move away the pressure-spring of the brush.
11. Carefully remove the carbon brush and insert the new one.
12. Put on the cables of the brush, and put on the pressure.
13. Put back the cover and screw it on.
Read more about D21: en.adbl.eu/produkt/adbl-rolle...
Read more about R125: en.adbl.eu/produkt/adbl-rolle...
#adbl #carbonbrush #D21adbl #R125adbl
Негізгі бет Автокөліктер мен көлік құралдары ADBL service - changing the carbon brushes in D21 and R125 polishing machines - tutorial
Пікірлер