hiya ulung, thats awesome mate, how long did it take you to print and make?
@ulungprabowo
Жыл бұрын
Thank you! Around 5 days to print and maybe 2 weeks to finish, the difficult and what make it long time to make is to gather all hardware parts like screw etc, also to find the right string is difficult. In the video I use paracord but fray only for about 50 shots, but I finally use dyneema string with my own stringing tehnique, using joerg sprave ways to splice doesnt work because the string for rubber-powered adderini is very short.
@markhuckercelticcrossbows7887
Жыл бұрын
@@ulungprabowo yes, im not completely satisfied with my power band set up, should have the bow version here in two weeks, i do a build video, then do a head to head cimparison, than put them on my kofi page, for sale.
@ulungprabowo
Жыл бұрын
@@markhuckercelticcrossbows7887 great! Good luck with your built! You have to try using dyneema if you haven't, it is awesome. Apart from it strentgh and non stretchy, my trigger pull weight even getting lowered and so smooth using dyneema, maybe because it has low friction properties, I have a surprised shot without anticipation which give a lot more accuracy in my case.
@CrossTactics
Жыл бұрын
@@markhuckercelticcrossbows7887 funny bumping into you here ;)
@CrossTactics
Жыл бұрын
@@ulungprabowo dyneema sounds like the way to go, I also saw Jeorg Spravs video on it.
@foodlovers1291
18 күн бұрын
tembus kayu gak om?
@fallout4enjoyer
Жыл бұрын
can u mod it and add more powerfull bands to it and maybe a stock :)
@ulungprabowo
Жыл бұрын
Yes of course, but I haven't tried it. The instructions manual said that it handle 50 lbs maximum.
@GamQill
5 ай бұрын
Bagus kh ni om buat tembak ikan
@GamQill
5 ай бұрын
Bisa buat tembak ikan kh om
@milanaura737
10 ай бұрын
Berapaan hargax mas...?
@ikhsanmuchlisien71
10 ай бұрын
Mantap... berapa meter tembakannya...?
@ulungprabowo
9 ай бұрын
Testnya jarak 15 meter om
@ulungprabowo
9 ай бұрын
Testnya jarak 15 meter om
@thedoctorAR
Жыл бұрын
Jaluk nomor WA ne mas. Bek e pengen digawekno mben.
@nasdamian
3 ай бұрын
STL files?
@amgptoysandplay6015
Жыл бұрын
Tuku e nngdi iku mas
@ulungprabowo
Жыл бұрын
Gawe dewe mas
@amgptoysandplay6015
Жыл бұрын
Pake printer 3D mas?
@ulungprabowo
9 ай бұрын
@@amgptoysandplay6015iya
@thedoctorAR
Жыл бұрын
Mas.. Ini legal ya? Pengen beli takut kena sita😂
@ulungprabowo
Жыл бұрын
Maaf ya baru balas. Ga tau legal nggaknya mas, di Indonesia ga ada peraturan soal ini. Dulu sih crossbow ga boleh masuk Indonesia tapi membuat crossbow ga melanggar hukum. Jadi yg dilarang adalah importnya. Membeli, membuat, memiliki dan menembakkannya ga ada peraturannya.
@spykemanloon87
3 ай бұрын
hello sir can u please send me the stl files?? i cannot download from cults coz of transaction problem. thank you
@ulungprabowo
3 ай бұрын
I am sorry I can't, you should contact the maker.
@GamQill
5 ай бұрын
Bisa buat tembak ikan kh om
@ulungprabowo
5 ай бұрын
Ga bisa om
@GamQill
5 ай бұрын
@@ulungprabowo maaf tanya om Apa kurang kencang tembakan nya
@ulungprabowo
5 ай бұрын
@@GamQill oh bukan, karena kalau tali pancingnya kan nyantol di anak panahnya. Kalau ini karena diisi banyak pake magazine jadinya ga bisa dikasih tali pancing kayak gitu.
Пікірлер: 35