Hope you like this new "toy". Thanks Joerg for new inventions and great videos :) Best regards.
@my_channel_44
2 жыл бұрын
is awesome
@perwestermark8920
2 жыл бұрын
Would it be possible to modify the tension mechanism to remove the allen key and use some quick-lock mechanism with a small lever? Maybe similar to the quick levers for bike wheels? It would be great if the rubber band pre-tension could be removed or reapplied in just some seconds with no need of a tool, for easy daily use.
@discopolofan
2 жыл бұрын
@@perwestermark8920 This would be difficult as the printed plastic is not that strong. I used a simple, compact and rather reliable solution, but requiring the use of an allen key.
@joshalmighty1901
2 жыл бұрын
Amazing design! I hope to see Joerg modify or re-invision this with "More Power!" I can't wait to see its Features!
@petrokemikal
2 жыл бұрын
You need to make something like this that shoots steel bb's next !!!! It could shoot steel 6mm bbs.. To make it legal all you would have to do is use the correct amount of rubber to make it under whatever joule limit is in your country ;] All your designs are really cool man..
@kj3n569
2 жыл бұрын
Joerg now has a safety T-shirt with Joerg on it. He is now bulletproof.
@comfortablynumb9342
2 жыл бұрын
Ha! Bullets lack the courage to fly in his direction.
@rolandgdean
2 жыл бұрын
Jorge, you are a brilliant person sir. “Stupid” is never a word I would use to describe ANY aspect of you. 3D printing is simply a skill you have yet to collect.
@bsod4144
2 жыл бұрын
and its very easy..especially for someone with a mechanical mind like Joerg
@thatoneguy7603
2 жыл бұрын
A true backyard genius.
@wynchell.abanes
2 жыл бұрын
I think it meant joke. And it also greatly shows his humility.
@ScriciRockz
2 жыл бұрын
The printing part yes...the 3d design of the parts in a CAD...not that easy... but still can be done
@James28R
2 жыл бұрын
whats with the ass kissing?
@Tuna5908
2 жыл бұрын
The beginning of an even better masterpiece
@nudl3Zz
2 жыл бұрын
the design alone is already awsome. looks so futuristic
@BlurSentinel
2 жыл бұрын
It is so obvious, that this idea should result in an steambow product, with that pinky addition. A product crossover Sprave, Janikowski + Steambow.
@LiteraryCurtastrophe
2 жыл бұрын
It doesn't have to be just the pinky, too, the whole hand grip could, theoretically, move with the lever action, then be gripped in place with the hand... I don't know the laws around this type of stuff, so I don't know if that would change the legality of the device
@kryptek-channel3725
2 жыл бұрын
6:02 « I’m too stoopid to use 3D printers » Also Joerg : *Proceeds to create a war weapon with a branch and a fork*
@henridelagardere264
2 жыл бұрын
When you can no longer MacGyver a solution, you'll have to Sprave it. At least a fellow can hope.
@muhammedshamil2443
2 жыл бұрын
Dont forg3t the artillery cannon with cardboard and rubberband.
@MonkeyJedi99
2 жыл бұрын
I await the dat that the anti-proliferation treaty expires and Jeorg gets to collaborate with Colin Furze.
@AtomikBanane
2 жыл бұрын
I think it was a humble way to say "I don't have the time to handle this manufacturing method". Because it takes quiet some time to design and print stuff like this. As a guy who makes a living out of FDM printing, I have a lot of respect for Lucasz because what he shows here is a masterpiece.
@mohawksteel2215
2 жыл бұрын
Joerg is always giving us mind stimulating information for years now. Thank you Joerg, much appreciated.
@Ariuskooo
2 жыл бұрын
After week of printing and assembling it is finally alive, and well... its one of the top 3 items that ive printed after 8yrs in 3d printing! Major kudos @Łukasz!!!
@JustAnotherJarhead
2 жыл бұрын
NEXT video please: rapid fire the whole magazine at 5 meters and show us the target as it impacts. Thanks!
@WvlfDarkfire
2 жыл бұрын
Best pistol bow I've ever seen. Thanks for sharing Joerg!
@henridelagardere264
2 жыл бұрын
3 Joergs for a 3D video, as fitting as the V-neck shirt!
@bruhmania7359
2 жыл бұрын
Dont you know that 3d stands for 3 deutsche?
@ryche.rising
2 жыл бұрын
YOU are "da man" Joerg! I watch your videos not only to inspire me, but also to pick some of your joy and make my days better just seeing your happiness for doing what you love and that smile in your face.
@bjw4859
2 жыл бұрын
Did I just hear that right, someone from Poland is teaching someone from Germany how to modify a weapon, this is a great new world, you are the man Joerg, thanks for always trying to just be about the fun side of things.
@andiarrohnds5163
Жыл бұрын
you know, joerg, the most impressive thing about this channel is not the content itself, but more of how this channel always manages to impress me. just when i thought ive seen it all, there will always be another video which is genuinely interesting to see. really, this has gone on over about a hundred times now. truly impressive!
@schatzi852
2 жыл бұрын
You are brilliant! I bought the adder a while ago. Best purchase I've ever made!
@zechsblack5891
2 жыл бұрын
I basically got into printing because of this. Bought a second larger printer to run the large single piece version of parts and am very excited to see how it turns out. The creator's file set and guide is amazing and beyond worth paying him for!
@marksman6913
7 ай бұрын
I didn't get into 3d printing FOR this, but it is definitely the type of awesome, functional kind of printing I hoped I could do. And, additionally, almost convinces me I should invest in a larger bed printer as well!
@jaredflynn3750
4 ай бұрын
would there be any way to modify the files so its has a lever action style loop for spincocking, makes one handed use easier and removes the need for the latch on the grip making since it would be easier to hold closed.
@Listener970
2 жыл бұрын
Beautiful, sleek and compact design. Imagine if your designs were all optimized and 3d printed? Or at least those that you are planning to bring to market. Well, the plans would also be enough
@stevensteele160
2 жыл бұрын
That's really awesome, I would like to have one myself.
@jojorobino5312
2 жыл бұрын
Man singlehandedly revolutionized bows and crossbows. Just incredible.
@JessWLStuart
2 жыл бұрын
Wow! It's awesome to see the synergy between Joerg and Lukasz!
@Luke-lt4rx
2 жыл бұрын
This definitely needs to go commercial. So neat! What would also be cool is the addition of a a wire collapsible stock for better stability. This would allow for the overall compactness to be maintained and shot like a pistol, but quickly deployed for more precise shooting. Those are usually terrible on firearms because they are uncomfortable with recoil but would be perfect for this.
@tinton98
2 жыл бұрын
Wydrukowałem… i mogę powiedzieć że super to lata. Dobra robota Łukaszu👍
@Imatallguy1
8 ай бұрын
I wish I could tell Joerg how influential he is on my regular daily hobby fun. Making this thing is my next project.
@leggomygopro8219
2 жыл бұрын
That's pretty awesome !! Now I have a reason to finally get a 3D printer !
@jasonjulian1
2 жыл бұрын
I must print this, this week! An amazing design, made so attainable to so many! Most impressive.
@marekhrusovsky1397
2 жыл бұрын
hello, is the file available for download? I am new to this but i wasn able to find it
@TheDiosparati05
2 жыл бұрын
Amazing! Love watching the ingenuity.
@clausbader9537
2 жыл бұрын
Thanks Jörg for the short presentation. I would have liked to see the performance too.
@perwestermark8920
2 жыл бұрын
I think there would be an optional further improvement by having a quick-release to tension/untension the rubber band so no allen key is needed. With a quick-release, it could be tensioned in 5 seconds making it so much quicker if someone wants to shoot every day.
@JelMain
2 жыл бұрын
In extremis you could just hook the block over the lug, I think. You'd risk it jumping off, and shaking the nut free, but that could be glued in...Sometimes a pause to think is useful.
@MonkeyJedi99
2 жыл бұрын
You could replace the allen-key screw with a wing-head screw, then no tools would be needed.
@ernststravoblofeld
2 жыл бұрын
I was thinking about a catch that would tension the bands the first time you cock it.
@JelMain
2 жыл бұрын
@@ernststravoblofeld You'd have to put the tension release at the other end of the band, then, because that's the only part which is dynamic in the action. However, that's a really bad idea, because the way it's been designed transfers the tension to what sounds like a really solid catch at the front, whereas anything in that area to the rear may not be. Here, KISS certainly applies: don't forget you're dealing with a weapon.
@jakegarrett8109
2 жыл бұрын
Even just a spring and washer under the bolt seems like it might work, but yeah professionally it should use a detent retaining pin. Flip out in half a second auto-locking, and fold up with a pin press.
@bigbunn833
2 жыл бұрын
Loved it Mr. J! Respect and Godspeed my brother.
@TheJedaiHero9000
2 жыл бұрын
An ABSOLUTE AWESOME Pistol Crossbow right there, no fraking doubt about that 😎👍
@Fraxxxi
2 жыл бұрын
I've always been happy to just admire the inventions on this channel from a safe distance. but damn me, I want this.
@Korppis
2 жыл бұрын
I think I really need to add 3d printer into my long term shopping list. So many cool things I could print out for me and the kids.
@narutaki4554
2 жыл бұрын
awesome job with the design
@averno6174
2 жыл бұрын
Hi, I buyed the stl files for about 7 euros and printed whole adderini project a few days ago. The pieces still need sand work to adjust properly, find the springs..... and I'm thinking about changing rubber bands for an 80 pounds pistol bow with string, so probably metal trigger will be needed or at minimum change the original one system as it only relies on a spring to hold string. I plan also to add an airsoft stock and a safe. It is a huge project so there is a lot of work for me to do, but first I will bring this thing to work as it is and then try my mods. For those who want to print one, it took me 4 days to print with an Anycubic Mega X and 1Kg of black PLA (1/2 Kg of each if you use two colours). Printed just following printing instructions in the pdf. I suggest to print it in PETG as PLA is worst for deal with tension and heat. To make it a rifle instead a pistol you only need to edit propper stl files in Fusion 360, AutoCad or any other and make adjustments, but take in consideration that you will need metal parts attached to build it so it won't brake. Eddited due to my poor english.....
@hitchcock95
2 жыл бұрын
Love the videos man!
@syafiqrenaissance6490
2 жыл бұрын
That weapon very good for close range to mid range combat.. Very creative way to use 3d printing for crossbow pistol with rubberband..
@frankreich-tesnun
2 жыл бұрын
Łukasz .... Great job, well done and THX so much !!
@borat6363
8 күн бұрын
Would love to see this employed as a home defense scenario (broadhead through ballistic gelatin, leather, and cotton fabric)! Much more maneuverable in close quarters.
@jimmysgameclips
2 жыл бұрын
That is next level 3D print design, cool!
@huarwe8797
2 жыл бұрын
Beyond cool describes this channel well.
@keyem4504
2 жыл бұрын
That thing really looked gorgeous.
@creativi-tea398
2 жыл бұрын
Bought mine and printing it now! :D Great design.
@cb5600
2 жыл бұрын
You always find the coolest stuff. 👊🏻🧡🇨🇦
@The_Mimewar
2 жыл бұрын
JOERG!! THE GAME HAS BEEN CHANGED TOO MANY TIMES!! I don’t even know what game we’re playing anymore!
@22tanmay
2 жыл бұрын
That's a cool design. Compact enough to go into a sling holster 😊
@JavierChiappa
2 жыл бұрын
5:56 Joerg imagines of effective the weapon would be, and then lets out The Laugh
@DevinsCalisthenics
2 жыл бұрын
Wow, what an amazing pistol! Talent!
@stoojona5119
2 жыл бұрын
You have the hands and brain of an engineer Joerg, and you could easily learn to use a 3D printer! Don't put yourself down and say you are "too stupid" because you are one the most ingenious people on this platform... otherwise, why would people want to collaborate with you and make your ideas into very successful products that thousands of people all over the world continue to use and enjoy?! You can make anything you imagine with your two hands and that is most definatley NOT stupid! I Myself, and many others im sure, consider you a genius and also a lovely, big hearted and funny bloke. With the best catchphrase on KZitem! "LET ME SHOW YOU ITS FEATURES!" absolute GOLD Joerg
@professionalidiots101
2 жыл бұрын
Awesome bit of kit 👍🏻
@blamokapow137
2 жыл бұрын
Brilliant!
@wildewalker
2 жыл бұрын
I really like this build!
@davross600
2 жыл бұрын
This is seriously next level.
@freezyAndHaze
2 жыл бұрын
Looks stunning. Gonna build this one.
@danilolattaro
2 жыл бұрын
Amazing design!
@foolwise4703
2 жыл бұрын
Wow this thing is meticulously designed! I might build it :-)
@michaelmartin8337
2 жыл бұрын
That is a slick looking crossbow pistol you got there
@unicornadrian1358
2 жыл бұрын
I would love to see a Joerg and Colin Furze collaboration video. The energy would be off the charts.
@Sporek
2 жыл бұрын
Great job Lucas! 👍 Dobra robota Łukasz! 👍😁
@mrforeverhun
2 жыл бұрын
Greetings from Hungary, Polish brother! ❤️
@Sporek
2 жыл бұрын
@@mrforeverhun Greetings to you too, bro! 😉
@thomaskletzl6493
2 жыл бұрын
the quality of the print is crazy
@DanBurgaud
2 жыл бұрын
Another masterpiece!
@maddoxlogging2303
2 жыл бұрын
Friggin awesome! That needs to make its way here in 🇺🇸
@kalciferis
2 жыл бұрын
Jeezus Crist, i saw this guy like 10 years ago on youtube, and now i get him in my suggeations today...
@andrewkaiser1606
2 жыл бұрын
You are both geniuses.
@shurmurray
2 жыл бұрын
But Joerg, 3D printing is not hard at all. It just feels like a barrier, but you can always summon someone who is in 3D printing and he going to kickstart you in under a day - including basics of using CAD, setting up the printer itself and uploading your task into it. And the next update to a gun laws in Germany will ban 3D printers :)
@gerhardlourens6982
2 жыл бұрын
I love this! Finally a reason to buy a 3D printer!
@jasonz7788
Жыл бұрын
Great work Sir thank you
@doomsdayprofit5779
2 жыл бұрын
There are few things in nature that sound as satisfied as jeorgs chuckle
@fredericrike5974
2 жыл бұрын
Imagine trying to find your way out a dense, dark woods...... and hearing that laugh! I don't know about satisfied, but I'll think about it after I change into my brown pants! FR
@125hrc125
2 жыл бұрын
Great design!
@LucifersTear
2 жыл бұрын
Awesome! Deffo needs the pinkie grip feature!
@It-b-Blair
2 жыл бұрын
I just got a printer… still ironing out print quality… this is dope!
@NocturnalRS
2 жыл бұрын
I like that design.
@InvertFPV
2 жыл бұрын
I have been printing similar crossbows and compound bows using the plastic as the limbs and just shooting bbq skewers. Not nearly the same power. I will have to to try this out, rubber is defiantly the way to go for force.
@ultramarinus2478
2 жыл бұрын
Beyond cool. Lukáš Yanikovský and Joerg Sprave is a pair of genious dudes... Thumb up to the ceiling.
@genefoster9770
2 жыл бұрын
that is incredible should sell like crazy great video see you on the next one
@mariusrotterdam5212
2 жыл бұрын
Great work! Master !!!
@Tophperry
2 жыл бұрын
YES! I will be printing one of these soon.
@Sam-ey1nn
2 жыл бұрын
Joerg wearing a child-size t-shirt of himself wearing a child-size t-shirt. Mind blown.
@Slingshotchannel
2 жыл бұрын
3XL shirts… my wife wears them as dresses.
@FortniteDad12
2 жыл бұрын
That's awesome I'm big on everything u do and like but to make it perfect it needs a quick lever to make it have tension even if it isn't a quick release to loosen that way it can really be used for home defense
@wpherigo1
2 жыл бұрын
I’m definitely printing that one!
@dnj3839
2 жыл бұрын
Where can you find the STL files for I've been looking everywhere and I can't find them
@leighdean1537
Жыл бұрын
You have great ideas and a gift for creating cool and totally new products, great innovation Jorge 🤙👌👍 When you love what you do then it shows with the unique inventions you keep making for your customers.. Love the channel ❤️ Ur optimisation and good energy projected with n your unique and hilarious presentation style.. 🙏👌🇬🇧
@MarekCabak
2 жыл бұрын
I would love to see post-apo tv show or webseries, where one of the characters or several characters would use Joergs weapons to fight enemies. Some of them may even have 3D printed versions, some of them just made from scrapwood. It makes more sense than normal weapons because ordinary "heroes" usually don't have access to those (unless you live in the USA I guess)
@jaredflynn3750
4 ай бұрын
make it with a lever action style loop for spincocking, makes one handed use easier and removes the need for the latch on the grip making it easier to hold closed
@jacktribble5253
2 жыл бұрын
That looks like a ton of fun. Target shooting for hours.
@kbjerke
2 жыл бұрын
Very impressive!!
@johnthomas7517
2 жыл бұрын
I doubt very seriously if you're "too stupid" to set up and run a 3D printer. But I LOVE the stuff you hand make, they've all been awesome!
@schnuffischulz
2 жыл бұрын
Great Design.
@warlord5295
2 жыл бұрын
Idea use the same type of spring used in a tape measure attach it to a sled that hooks onto the bow string so every time it fires the spring gets put under tension and like a tape measure draws itself back in and ready to fire again.
@littlemanoo
2 жыл бұрын
Love this Show!
@capthowdy126
2 жыл бұрын
love this thing, making mine now. or its already been made just working on getting the string made for it. my first time trying to do something like this so im still building the jig atm to give it a shot.
@enni711
2 жыл бұрын
It looks awesome! Love the colors...only black would look bad
@Hotwire_RCTrix
2 жыл бұрын
Awesome CAD skills 👍👍
@juliancantarelli
2 жыл бұрын
Joerg, the other day a thought came to my mind of a device to help loading crossbow. Imagine a standing "rack" in wich you can push your crosbow with your bodyweight and the sides of it "squishes" the crosbow arms, hence helping in the cocking process.
@orionthehunter217
2 жыл бұрын
Well that's a fun little toy...... Hey, here's an idea. How about if we make those cute little bolts EXPLODE ON IMPACT????
@pedropimenta896
2 жыл бұрын
How about the bolts spread to make multiple little bolts/pellets?
@calvincheney7405
2 жыл бұрын
As with an RPG launcher, one must incorporate a specific number of spins, reaching 920 meters prior to arming. To much risk involved in shock, centerfire primer tip detonation for this idea to work.
@danielmahon1589
2 жыл бұрын
@@calvincheney7405 the fletching can be used for the arming either that or a small spinner broad head
@jakegarrett8109
2 жыл бұрын
For safety you probably want something like a ripcord safety where a fishing line is tied to it so it must exceed that distance. If you just want a toy print a cupped tip and put in those "snap its" which are the little bags of rocks that detonate when you throw them on the ground or compress them and available almost anywhere in the US near July 4th. That way you get a cool little flash at night but without damaging anything.
@Jeremy-t2
2 жыл бұрын
Oh yeah!!! Very, very cool !! I want one or five 😁...Jorge, bro you sir are a genius and have genius friends. My hat is off to you good sir!
@lordgarion514
2 жыл бұрын
That's awesome, and I would pay good money for a rifle version with 60-70 pound draw, and about 4 times the draw length.
@user-pk5id4gw4j
Жыл бұрын
I've also made an adderini. Thank you for sharing the file. However, since it is a plastic made of a 3D printer, it has a disadvantage that it breaks easily. The front part is often broken.
@DKFX1
Жыл бұрын
Then use a stronger plastic.
@sifusasdo2314
2 жыл бұрын
Cool Video 👍 Thank U for the Info and the Links 👍
@speckledjim_
2 жыл бұрын
Outstanding 👏🏻👏🏻👏🏻👏🏻
@geogemini8528
2 жыл бұрын
Wow that is cool! If I didn't live in America I would definitely keep one of those in the house.
@antho6713
2 жыл бұрын
Shoot a burglar in your home with this in France and YOU end up in jail 😢
@geogemini8528
2 жыл бұрын
@@antho6713 wow, I guess steal his wallet then, then you're the burglar and he won't be able to touch you haha
Пікірлер: 726