Getting a new DSLR - $500... Downloading Agisoft - $150... Learning to merge chunks so you can get the underside of your 3D scanned model.... PRICELESS ;) Thank you for taking the time to upload this. Learning to do points was pretty awesome too!
@brittanyjohnson9873
7 жыл бұрын
A good photogrammetry model starts with making sure you're taking good photos in a good lighting set up! Glad you enjoyed. :)
@eonblue46
6 жыл бұрын
This is the best photoscan tutorial I've found yet!
@pseudopod77
6 жыл бұрын
Excellent job Brittany. Very comprehensive and in depth. thank YOU!
@45Snipers
6 жыл бұрын
Thanks for taking the time to show this. Very helpful.
@PeterKLee
6 жыл бұрын
I didn't know that I could use marker on the photos! Thanks for great tip, Brittany!
@swamihuman9395
4 жыл бұрын
Thx, again. I appreciate the "deeper" coverage.
@TheIntrovertSpeaks
7 жыл бұрын
Fantastic work! I'm tryin to learn aerial mapping using my drones and my search led me here. Thank you for your time and work.
@RobinBervini
5 жыл бұрын
Well done! It's an easy beginner tutorial covering all required steps, with also a good amount of troubleshooting. Voice recording was also good, it's really nice to watch.
@JonHutton
6 жыл бұрын
Thanks for taking the time to do this.
@adamsaciuk7799
7 жыл бұрын
Brittany, great video. One of the better ones I have seen. Look forward to seeing what else you learn with Photoscan because you seem to be doing a great job already. Would love to see some of your work uploaded to sketchfab or something like that!
@brittanyjohnson9873
7 жыл бұрын
I'm taking a 3D break during my current term of classes, but this summer I should be doing some more 3D work. Keep an eye out for that!
@adamsaciuk7799
6 жыл бұрын
Hi Brittany, just watching your video again.. It's still great. :) Just wondering if you could give a little overview of how you set up your camera, the settings you use, and the way you capture the images (ie. turntable or walk around image). This is my go to video when I need to show people the basics of Photoshop... THX.
@charliemitchell4280
5 жыл бұрын
Thank you Brittany, great video, easy to follow, well explained and nice to show the faults and how you worked through the issues, very helpful.
@TahirGluttony
5 жыл бұрын
hey Brittany, thank you for sharing a great tutorial. you are awesome :)
@damianmathis8914
7 жыл бұрын
great video. I like the length cause you covered a lot that others would omitted. keep up the videos and I watch all you post. Damian
@brittanyjohnson9873
7 жыл бұрын
Thanks! I like doing workflow ones like this because it's pretty easy to talk through the process.
@enirfo
5 жыл бұрын
Thank you so much for this video! Great introduction to the software, You should get paid by Agisoft!!
@brianminor4327
7 жыл бұрын
Really enjoyed the tutorial and look forward to your others. I would like to add that this is for Photoscan Pro as Standard does not support markers. It took me a while to figure that out.
@brittanyjohnson9873
7 жыл бұрын
Brian Minor Thanks! I actually hadn't realized that - was working with the trial program at the time
@aronseptianto8142
4 жыл бұрын
just for a tip for someone who has a hard time scanning faces pimples work really well as tracking marker get someone with pimples (and ofc also add tracking marker on the neck)
@ihabiano
5 жыл бұрын
Great job and a wonderful video.
@ThePhilbox
4 жыл бұрын
I think it would be faster to shoot more photos than do all the manual aligning. Maybe you need the fourth angle to connect the top and sides. When I get bad alignment I add more photos till they all connect.
@robsmith1891
6 жыл бұрын
Thanks that was really clear! I am just learning and now I know how to use markers to align chunks :-)
@chrisjohnson5599
7 жыл бұрын
WOW! This is really fun to learn!
@brittanyjohnson9873
7 жыл бұрын
Aw, thanks!
@АлександрОвчинников-й3х
7 жыл бұрын
where can I find the calligraphic grid on which the model lies?
@iPounceMax
3 жыл бұрын
did you find something? might be great sharing it
@linvillepottery1973
6 жыл бұрын
Excellent Tutorial! Hope you will do another one.
@mehfoozzansari
5 жыл бұрын
Nice video. Good explanation. Please make a video on how to take photos
@pugnate666
6 жыл бұрын
So apprechiated! Just jumped into the programm, had no idea what to do to make this work, and (I know, that tutorial is 40mins long, but I had enough black magic left to skip some minutes :P) had a model in under 5mins ^^ thx
@starik5240
7 жыл бұрын
Thank you so much! Your advice helped me a lot!
@brittanyjohnson9873
7 жыл бұрын
Good to hear! Happy modeling!
@SteveNilsen
6 жыл бұрын
Fantastic indepth video on how to get a great result. I have one question, where did you get that background referance page where you set your control points? Is it downloadable from the internet somewhere?
@123arskas
5 жыл бұрын
Thank you so much. The details you gave were very useful. You should do more videos on other software too.
@siebenmeister
6 жыл бұрын
I love your tutorial. Please do more :)
@LycanB64
2 жыл бұрын
Super helpful, thank you!
@redx3250
4 жыл бұрын
This is all i can thank you THANK YOU SO SO SO SO SO MUCH!!!!!!!!!!!!!!!!!!!!!!!!!!!!
@darcyellis9769
7 жыл бұрын
excellent tutorial you have gotten me out of a serious jam :-)
@slidr9442
6 жыл бұрын
Thanks for your work. Learned some stuff!
@nextblip
6 жыл бұрын
Very nice video we expect more from you
@edannaio
2 жыл бұрын
This is a great video! Maybe I missed it, but did you "build mesh"?
@andresagudelo2297
3 жыл бұрын
Hi, it happens that i am constructing a photogrammetric model by hand as you did, the cameras had GPS, I also do the markers as it helps though the use of Targets over the scene. Is it correct or necessary that once I finish the markers i unmark the photos with the GPS?, these GPS reference for the pictures wouldn't help at all?
@essexwalks6648
4 жыл бұрын
Markers are only available with the Professional version - which at $ 3499 is outside most people pocket.
@tinrozman4347
5 жыл бұрын
You just have to double-click on the center of the model to place it in the middle
@DATECStudio
4 жыл бұрын
How can I get PBR material (texture channel maps) in this software? It get just diffuse, I need normal, Height map. Reflection, glossiness etc ...
@patrickkrebs
6 жыл бұрын
Perfect Tutorial! Thank you!
@ginkgoLOL
4 жыл бұрын
Nice walkthrough. I appreciate you took a rock which is more on the nasty side of things regarding computational image alignment. Low contrast and diffuse shapes makes it hard to find suitable control points for merging the chucks but as you showed here, it is possible. Do you host these models publicly?
@klausschindl1355
5 жыл бұрын
Thank you for the great tutorial, you helped me a lot. You would have saved some time using your keybord del/delete button instead of going to the menu for deleting dense cloud points...
@nobies2ster
7 жыл бұрын
thanks and really nice tutorial , i will try to draw and print my own guide
@whistle1868
7 жыл бұрын
Thank you very much for your tutorial Brittany. Great job! Where can I get a scale like you use in the video? Could you put a link to download it please? Thanks!!
@SvSzYT
2 жыл бұрын
does EVERY photo need these flags points from 7:00 ? What if the object is too big and exceeds the size of the images, so every photo has only a crop from the object?
@ROMSZLA2
6 жыл бұрын
Dear Brittany, thank You for your tutorial. I have one question to You. In the end of the tutorial You have told that you need to fix problem wit grid which was appear on the texture, to do it will You need to repeat whole prosess of align photos, mesh and so on? or is it an option to do it without this?
@thomasonthetrail
4 жыл бұрын
Romek Szl I would also be interested to know this, thanks!
@boboscurse4130
5 жыл бұрын
I'm brand new to all of this. I'm curious...why would you have so many photos that didn't align?
@justinyuvilla8944
6 жыл бұрын
I see you didn't use masks but instead used markers. Would it have been better if masks were used? Also in the marking process, do you have to literally mark every image, or will choosing only a dozen images off the best angles do for proper alignment and dense cloud creation?
@cgrosbeck
2 жыл бұрын
Where did you get that marker pad from?
@cgriver
5 жыл бұрын
Great tutorial!
@mikieemiike3979
5 жыл бұрын
Question: could you have just marked the rock on Chunks 1 and 2, while bypassing marking the colored square targets?
@meiming1
3 жыл бұрын
This was great! One question - when you merged the two chunks it seemed to generate a bottom. Ive generated 3D models but can't seem to get bottoms when the object is on a flat surface. How does this work?
@Danial79
6 жыл бұрын
Thanks for the tutorial. I learned a lot! If you do this as part of your job, might I suggest you get a better camera. It would make pattern recognition (both computer and human) much easier :)
@JuiceBlack
7 жыл бұрын
Thank you for this, it was a great help! :)
@ClassyDogFilms
7 жыл бұрын
A great tutorial, Brittany! You did an excellent job explaining markers and how to use them. I wanted to ask, do you mind if I mention you and include a link to your video in my next PhotoScan Guide?
@brittanyjohnson9873
7 жыл бұрын
I'm flattered, go right ahead!! Sometime in the next few weeks I should be doing another process video or two and maybe some microtutorials for small parts.
@ClassyDogFilms
7 жыл бұрын
Thanks so much, Brittany! I'm looking forward to seeing more videos from you!
@ClassyDogFilms
7 жыл бұрын
Hey, Brittany! Do you have an email I could reach you at? Or if you would prefer not to give it out here, you can message me first, it's my channel name at gmail.com.
@devourerofbigmacs7858
6 жыл бұрын
Isn't it possible to hotkey the placement of markers? This would make it a LOT faster
@PathologFM
Жыл бұрын
where can you please download or generate the reference marks that you have under a rock, thank you
@nasfaroth
6 жыл бұрын
really good tuto. thank you. hope a new one !
@deprecatedaccount9857
7 жыл бұрын
I'm really interested in this sort of thing. What kind of career opportunities are there? And how could one go about studying towards this?
@MohanBChand-dj3st
5 жыл бұрын
highly appreciated the video, could you please say, how to estimate the accuracy of DEM and Orthophoto?
@DulshanK
6 жыл бұрын
thank you! an excellent tutorial.
@Lonczakt
6 жыл бұрын
Thank you! Very helpful
@leocalzeti7237
4 жыл бұрын
hello when i align photos they are all togheter in 1 single point can you help me ??
@Danial79
6 жыл бұрын
Just started using the PhotoScan demo after watching this, and it turns out the the custom markers are only available in the professional version 😥
@artiegirl2595
5 жыл бұрын
Hi Brittnay, great tutorial, thank you so much for sharing this. Where did you get the grid that is sitting under the object in the images?
@joselopezha
7 жыл бұрын
Hi. I'm having a problem on scale models. When im trying to import the mesh in sketchUp, its comes in different sizes.
@v3pic
5 жыл бұрын
Do you have a printable template of that grid underneath the fossil? Also how did you get such even lighting for the photos?
@cubaindy6700
7 жыл бұрын
Hi Brittany. Thanks for posting. I've followed all the steps exactly as I've found them across multiple tutorials, and I've done numerous shoots and numerous imports, and masked off my images, but I'm having ZERO success getting anything to render at all. Could I ask you some questions?
@brittanyjohnson9873
7 жыл бұрын
I can't guarantee an answer, but you can ask away.
@MeshmenStudio
6 жыл бұрын
great tutorial
@10ProduccionesPixel
7 жыл бұрын
Greetings. I have a series of photographs of a church (more than 400 images). Do a process in Remake that only accepts me 50 images and the model was quite acceptable, but I want to improve the quality. My query is if to achieve this is convenient in aligning images, cloud points and mesh, use the option "Higth or finer" This is because you use the middle option in all three options and the mesh loses many details which It does not happen in Remake. Thank you very much for the help.
@PraxisNeikoz
6 жыл бұрын
Muy bueno, recomendable!!
@barulicksama3838
5 жыл бұрын
How do I turn OFF automatic marker placement? Program does false suggestions.
@chaimshkop4474
6 жыл бұрын
Is there a way to remove all the markers to a certain point at once?
@maazmukhtar8095
7 жыл бұрын
in my agisoft-photoscan,there is a black screen before and after adding photos..pls help me with this problem
@SniffiestStone
7 жыл бұрын
If you had another row of images between the bottom and middle row would that have made it so you wouldn't need to do the flaging?
@brittanyjohnson9873
7 жыл бұрын
It might have. It's tough to say for sure because I think the very strange craggy/bumpy texture of the stone mixed with the monotonous color in flat lighting was throwing off the program.
@suhaibchobi
7 жыл бұрын
Thank you sooooooooooo much .
@diegoalonsomezazapata3950
6 жыл бұрын
Muy buen tutorial, excelente. Para cuando en español :)
@tore7711
6 жыл бұрын
여기 있는 포인트 수동으로 추가하는 기능은 pro에만 있습니다. standard에 없어요.
@6Dr6Acula6
6 жыл бұрын
정품키 드릴까여
@starik5240
7 жыл бұрын
Super video!!! Tell me, please, what is the name of the calibration image under the stone and where can I find it on the Internet?
@brittanyjohnson9873
7 жыл бұрын
I had to ask my professor, Austin Mason, who printed and put the kit together originally. The circular centimenter scale image is courtesy of Sam Porter: conservancy.umn.edu/handle/11299/172480?show=full , see PDF attachments, there's a few options!
@Kallen50000
7 жыл бұрын
Thanks so much, I've been looking for something like this.
@alvinkomen3625
6 жыл бұрын
great stuff
@paulkassner
4 жыл бұрын
Where did you get that white grid paper from? Awesome job!
My photos never align what am i doing wrong i believe my overlapped in photos are good
@rockywoodfilms3934
6 жыл бұрын
Dont work. I select align photos as above and nothing displayed at all. Ive given up on it
@АлександрОвчинников-й3х
7 жыл бұрын
It turns out when photographing you can rotate the object itself around the axis and not the camera around the object?
@АлександрОвчинников-й3х
7 жыл бұрын
made a photo object around its axis, but the program and puts the camera from one direction ((And not like you from different directions
@danielcruzsm
7 жыл бұрын
Thank you!
@GrahamNickerson
5 жыл бұрын
Thanks!
@DadeWheless
6 жыл бұрын
Unfortunately it seems like this entire process only applies to the "pro" version of the software :-( the standard version doesn't seem to have markers function.
@devourerofbigmacs7858
6 жыл бұрын
kzitem.info/news/bejne/pYGFuo6YjYqLi4o here you are
@JonHutton
6 жыл бұрын
Brittany did you flip the rock over and take the bottom pictures in this same set?
@brittanyjohnson9873
6 жыл бұрын
BigGreenMug Yes. The second chunk was a series of photos taken after I flipped the rock upside down!
@JonHutton
6 жыл бұрын
...I literally just got there, that's what you get for being impatient.
@SvSzYT
2 жыл бұрын
sorry did not understand how to set the points too :/ right click does not work
@francesco5895
Жыл бұрын
helllo, can you share the link where i get Photo Scan Professional for free for 30 days? i'm a student too. Thank you!
@abuzeid4033
5 жыл бұрын
thanks, it is very interesting
@StefonGrant
4 жыл бұрын
Thank You
@starik5240
7 жыл бұрын
Tell me please, did you take the stone from one position or bypass it?
@brittanyjohnson9873
7 жыл бұрын
The stone was left on a printout of the scale image on a turntable that was rotated to provide each angle/shot. The camera was in a fixed position on a tripod. This www.amazon.com/Bluecell-Rotating-Bearings-Monitor-Turntable/ is the exact one I used, but cake decorating turntables and similar work just as well, but consider putting a white piece of paper or black cloth on top of the turntable.
@VanjaHriberski
5 жыл бұрын
try meshroom no need for points marking there
@antonovsrb
6 жыл бұрын
which camera you use?
@georockstar09
6 жыл бұрын
on behalf of a fellow paleontologist - thanks!
@VirtualSuperSoldier
6 жыл бұрын
Brittany, where did you get the image that you set the fossil rock on?
@ajricherson1099
6 жыл бұрын
VirtualSuperSoldier She said she took them with a camera. The rock came from a college
@ELEKTROGOWK
6 жыл бұрын
Why not more videos?
@jasperd8048
7 жыл бұрын
nice tutorial, but i have an error that says 'not enough memory' i have 16gb ram, issn't that enough?
@brittanyjohnson9873
7 жыл бұрын
Definitely should be enough - the machine I was doing this on only had 8gb. You might want to head to the Agisoft help forums.
Пікірлер: 153