Hey Everyone. I made a video on the fly at work.... again finally.
Leave feedback and questions in the comments.
I prepped out and double coated 3 exterior entry doors in about 5 or 6 hours, with some other tasks mixed in.
This is the method I like to use, especially when coating with RED paint, Fast Dry paint, and smoother surfaces... those all make brushing and rolling much less ideal.
2 of the 3 doors required carbide-bladed scraping and a brush coat of Triple Thick Peel Stop to solve a bunch of little spots of old paint that had failed. With that, a good sanding, and 2 coats of Command Satin, there was a huge improvement for the new coating,
Command Satin dries quick and is pretty durable when used appropriately and for the right purposes.
Graco 490 PC Pro , 310 FFLP tip, 1500- 1600 psi, 2 coats at under 3 wet mil.
~ 45 minutes between coats
~ 1 hr before reassembly of door knobs.
weather stripping can stay out overnight to avoid sticking, though command does much better than most paints in that regard.
Негізгі бет Тәжірибелік нұсқаулар және стиль Airless Spraying Doors in Place, Paint and Masking Process Tutorial
Пікірлер: 21