The blue keycaps in the video are the ePBT Sky Dolch! You could check them out here! kzitem.info/news/bejne/qph-nGRvkod9kmk
@SagaSynthetics
Жыл бұрын
One thing that annoyed me when I got the AKKO MOD 007S v2 is that the rotary knob sits really high! On your model it sits "low" like the renders represented. I cannot fathom I would need to press harder, that would make the PCB snap in half. I see many others with the same results, rotary knob sits way too high on many models, yours is perfect!
@Fordiales
2 жыл бұрын
I just bought this board because of your reviews. Do you like the stock plate mount stabilizers or do you recommend to buy screw in stabilizers?
@ThockyDocKey
2 жыл бұрын
amazing content bro! really thinking of trying out the Akko MOD series for my next build. Lovin the vibes of your channel. One the keeb channels that got me inspired to create my channel as well. Keep it up pre!
@mikeoleksa
2 жыл бұрын
When I came across this keyboard I was pretty surprised to not see it on too many people's radar. Thank you for this review. Akko, Epomaker, and Yunzii, are pretty much the same company and I would have no issue buying this board. Akko also used to be Ducky's partner in China.
@mikeoleksa
2 жыл бұрын
What does keep me from buying this keyboard is the lack of QMK/VIA support. The Keychron Q1 ends up more appealing to me because of this. Especially now that it has a knob.
@MisterMayhem17
2 жыл бұрын
@@mikeoleksa there's dedicated software though
@CaviteTechnology
2 жыл бұрын
I think he's pertaining to the lack of VIA support, not software in particular
@MisterMayhem17
2 жыл бұрын
@@CaviteTechnologywell VIA is pretty awesome 😂
@jessicaho19
Жыл бұрын
@@mikeoleksa Not sure if you've bought a Q1 or not (I see you commented this a year ago), but Akko just came out with the Monsgeek M1 and has QMK/VIA for ~$100
@gwynvael159
2 жыл бұрын
Nice video. GMMK Pro can be flashed to support QMK/VIA and it is miles better than the Glorious Core.
@mikeoleksa
2 жыл бұрын
You need to check that, before spreading bad information, @Gwynvael. The newer versions of the GMMK Pro will NOT have VIA support straight out of the box. The newer boards will fully rely on GMMK's version of QMK.
@KCIREx
2 жыл бұрын
Hello, can I ask about the Keyboard latency on Akko Mod007 v2's. Apparently the competition like Q1 has high latency as per rtings review.
@mAnju-vc2wp
2 жыл бұрын
I just bought this keyboard in sakura pink. Your videos helped me a lot! Thank you 💖
@CaviteTechnology
2 жыл бұрын
Thanks for watching!
@sgist7824
2 жыл бұрын
How are you finding it?
@Clackbait
2 жыл бұрын
Nice work bro! 👏
@CaviteTechnology
2 жыл бұрын
Thanks man!
@judethaddeugabilangoso3685
2 жыл бұрын
hello sir cherry profile keycaps okay ba dito sir? kahit anong keycaps ilagay sir compatible ba?
@vectivuz1858
2 жыл бұрын
Agree with the ACR being muted. Solved with 5 layers of tape mod hahaha. Great video as always!
@CaviteTechnology
2 жыл бұрын
thanks for watching!
@zainzaidi5582
2 жыл бұрын
Haha. 5 layers??! That’s insane.
@vectivuz1858
2 жыл бұрын
@@zainzaidi5582 yes and it was close to not fitting haha. I think 4 is the sweet spot and I think it depends on the thickness of the tape you use. The board was really muted even when I removed the platefoam beforehand.
@davidfernandez8786
2 жыл бұрын
Stuck betweek Q1, Gmmk and mod007? Can u suggest which one is on top of the 3? Want to get q1 but sadly the knob version is not yet available in PH.
@CaviteTechnology
2 жыл бұрын
Q1 > Mod007 > GMMK Pro until the time Akko releases a south facing version of it. I'll still go with the Q1
@davidfernandez8786
2 жыл бұрын
@@CaviteTechnology hope they will release the Q1 knob version in PH.
@ZXMECHA
2 жыл бұрын
This is so much bouncier than the gmmk pro. I love it! Good vid too
@victorleetoboggan8099
2 жыл бұрын
i heard they have little to no flex when compare to q1, can you confirm ? hows the flex on your board ?
@anthonytan9059
2 жыл бұрын
thank you!! nice review and nice mod you have done!
@anhducvu198
2 жыл бұрын
I just bought this board and I noticed that the FR4 plate doesn't have screw hole, how do you connect the plate with the pcb?
@CaviteTechnology
2 жыл бұрын
The switches are the one's holding, as I've said in the reviewm they have a tendancy to fall off
@WitherRSN
2 жыл бұрын
You make a lot of Akko Stuff, can you please make an extra video just for the Akko Cloud Driver? I think a lot of people are looking for something like this. Especially the RGB section, showing each Mode Setting on the real Akko keyboard (Like you did in 4:11 but with every Mode then). As far as I know, the software rgb modes are different than the rgb modes on the keyboard itself (changing by pressing hotkey on keyboard)
@CaviteTechnology
2 жыл бұрын
Thanks for the suggestion, I'll add that on the list of videos I'll try to make :)
@WitherRSN
2 жыл бұрын
@@CaviteTechnology Thanks for answering and considering it. On the small snippets of the software that I see the "rainbow" color effects seems to just use like 3-5 colors. Am I wrong or is it really like that? Because that is really a dealbreaker for me, since the is keyboard is approaching RGB-Fans (like me) with their Northfacing RGB-Switches.
@ethanalba7696
2 жыл бұрын
may i know if the jelly black switches has a "khail design" or is it the normal cherry desgin
@CaviteTechnology
2 жыл бұрын
Normal cherry!
@jamesaltagracia9091
2 жыл бұрын
Will gmmk pro knobs fit this?
@amizan8653
2 жыл бұрын
Wow, never even heard that akko had a 75% premium board
@by_run
2 жыл бұрын
Torn between the mod005, mod007 and the keychron q2. 😫
@JerelTeh
2 жыл бұрын
this is just so sexy, most likely my next keyboard
@piptaz04
2 жыл бұрын
how good is the software? pwede ba mag remap ng keys like sa VIA?
@CaviteTechnology
2 жыл бұрын
yes! pwera sa fn key, all the keys can be remapped :)
@piptaz04
2 жыл бұрын
@@CaviteTechnology may 2nd layer ba?
@chowwun
2 жыл бұрын
Do the changes get applied to the keyboard at the hardware level? Or do you need to have the software installed on the computer for it to take effect?
@wcg66
2 жыл бұрын
@@chowwun changes are saved and survive power off/on.
@MisterMayhem17
2 жыл бұрын
Why not CaviTech? 😂
@argg.x
2 жыл бұрын
What color is that supposed to be?
@CaviteTechnology
2 жыл бұрын
Black :)
@argg.x
2 жыл бұрын
@@CaviteTechnology welp, thanks for the reply
@kyle.s1212
2 жыл бұрын
Prefer the mod005 with standard bottom row
@coluzea
2 жыл бұрын
why did they ever go with north facing in the first place. such a waste of a product launch
@Dazdigo
2 жыл бұрын
Proprietary software, I rather pay more for an open source option like QMK/VIA. Also North Facing Switches is another thing I try to avoid at this price point and higher.
Пікірлер: 52