took me 2 days and 4 showers to do what this dude just did in 8 mins...
@Ajunkman
9 ай бұрын
Hahahahah I just saw this 😂🤣😂 thanks for stopping by!!! (KZitem is really weird about notifications)
@testosteroneinc.3800
5 ай бұрын
No busted knuckles, like me? 😂
@AM-js2fo
4 ай бұрын
Lol
@novakvideoproductions
3 ай бұрын
It took me 2 days plus a rest day in between.
@daviddonahue1862
29 күн бұрын
I'll be surprised if the pump servived...always remover torque converter/trans together.
@joemumma6776
3 ай бұрын
About to go pull one this weekend hopefully i can do it before the yard closes 🤣
@Ajunkman
2 ай бұрын
Hahahahaha did you get her pulled????
@KD0LRG
Жыл бұрын
In news today 4l60 transmission pulled from customers car while parked in the U Pull lot. 😂😂😂😂. Have a good one 🍺
@clay500
Жыл бұрын
More like the transmission pulled from customers car while waiting in the drive through of Chik Fillet.
@Ajunkman
Жыл бұрын
🤣🤣🤣🤣🤣🤣🤣 aww man these comments made my day thanks for watching I appreciate the feedback 🙏🏽🙏🏽🙏🏽🤣🤣🤣🤙🏽🤙🏽🤙🏽🤙🏽👨🏻🔧👨🏻🔧👨🏻🔧🦾🦾🦾🦾
@Ajunkman
Жыл бұрын
@@clay500 🐥 🤣👨🏻🔧🦾🦾
@kevinnelson7070
Ай бұрын
That was smart leaving the converter for last less weight to deal with, you are the first person I saw do it like that 👍🏿
@kevinreinhardt9634
2 ай бұрын
Crew Chief and Pit President of Pick-N-Pull Pit Crew god damn son you were on a roll
@Ajunkman
2 ай бұрын
Hahahaha!! Appreciate the love bro thanks for stopping by 🙏🏽🦾👨🏻🔧
@1973jamie1
2 ай бұрын
You are the man. Mad props to you brother!!!
@eduardomenchaca1916
4 ай бұрын
This man…. Absolute machine. Usually takes me about 2-3 hrs but I don’t have any power tools. THIS MAN SHOULD BE CALLED THE JUNKYARD REAPER
@Ajunkman
4 ай бұрын
🥲sheesh the reaper haha!! Thanks man I appreciate it thanks for stopping by 🦾👨🏻🔧
@guerrilove1
9 күн бұрын
😂😂😂😂😂❤
@joshuaheart2764
2 ай бұрын
Thanks for showing the attach mode. Got to do one for my dad tonight. Might still have a Sat thanks to you.
@CounterPunchNation
3 ай бұрын
Damn bruh you’re insane! Handled that shit like a boss! 💪🏿
@Ajunkman
2 ай бұрын
I appreciate it bro thanks for stopping by 🦾👨🏻🔧🙏🏽
@azimpal
5 ай бұрын
Great video……. Awesome work👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼
@Ajunkman
5 ай бұрын
Thank you very much 🙏🏽👨🏻🔧
@joshryan9727
3 ай бұрын
This guy would stripp a hellcat in 30 mins 😂😂
@Ajunkman
2 ай бұрын
Show me where it’s at I’ll try my hardest hahahaha thanks for stopping by 🦾👨🏻🔧🙏🏽
@sanehazardous715
4 ай бұрын
This gave me some confidence! Kinda was afraid to start on mine but now I’m trying to be you without cutting the lines of course😅
@Ajunkman
4 ай бұрын
Hahaha don’t cut those bro!!! Appreciate the feedback thank you 🦾👨🏻🔧
@richardthorntonjr9863
24 күн бұрын
That’s a new sub right there nice work 💯
@guerrilove1
9 күн бұрын
Dammn that guy works hard!!!
@DustinKeating-yk3vq
Ай бұрын
Damn that was a clean fluid pan your lucky as hell
@BestPriceSunCoastTransmissions
4 ай бұрын
Very good camera angles!
@Ajunkman
4 ай бұрын
I appreciate it!!! 🙏🏽🦾👨🏻🔧
@Realest1979
2 ай бұрын
Damn dude. Impressive. I thought you were pulling a 80 for that kind of speed and intensity 🤣
@TBD3.0
Жыл бұрын
That's a nice catch.......scored👍🏻
@Ajunkman
11 ай бұрын
Yes sir she was a beauty 👨🏻🔧🤘🏽
@brandons.6824
Ай бұрын
Good job Junk man. I like how u left the converter attached. That kills majority of your, fcn w/ that thing.
@alleenebishop6657
9 ай бұрын
❤you rock!
@Ajunkman
9 ай бұрын
Thanks for stopping by!! 🙏🏽😁
@njthrift
Жыл бұрын
Another great video. Thanks!
@Ajunkman
Жыл бұрын
Got more coming!🙏🏽👨🏻🔧 appreciate it 🤙🏽
@yomommajumprcables
4 ай бұрын
Damn you were ROLLING
@Ajunkman
2 ай бұрын
Appreciate it brotha 🦾👨🏻🔧
@ernestorodriguez8228
4 ай бұрын
It usually takes me around 1.5-2 hours at a easy pace, just pulled the 4L60 out of my truck this morning for a overhaul and to clean and repaint the frame since its getting a bit nasty under there as i saw today.
@Ajunkman
4 ай бұрын
Nice work bro! Hoped you got that thing painted away!! Thanks for stopping by 🦾👨🏻🔧
@sedriccook2822
3 ай бұрын
Damn job well done
@Ajunkman
2 ай бұрын
Thank you very much 🦾👨🏻🔧🙏🏽
@daviddzedzy9194
Жыл бұрын
wow great work ur fast
@Ajunkman
Жыл бұрын
Thanks bro I try 🙏🏽👨🏻🔧 thanks for watching 🤙🏽
@carolynh4155
2 ай бұрын
Amazing
@living9377
3 күн бұрын
Very impressive. You got it down. Why did you leave the other bolts for the pan? I hope I Can work at those kinds of speeds.
@Caleb-vc3yi
23 күн бұрын
Yea...i did not think that was possible...wow. what about the transfer case and driveshafts though?
@richymcilwrick7776
3 ай бұрын
Thus dude fliped the pan off with out touching it i bet everyone else had to pry theres off. Every one who didnt have to pry the pan off comment and help this guy out
@Ajunkman
2 ай бұрын
Hahahha sometimes people gorilla glue their pans back idk why sometimes I have to pry it off too 🫣 thanks for stopping by!!!! 🦾👨🏻🔧🙏🏽
@kendaniels7257
3 ай бұрын
I remener being abale to move that fast under a car, but now there is no chance i can remember those scocket sizes that fast. Lol. Lol
@Ajunkman
2 ай бұрын
Hahahaha you got this bro.!!! Thanks for stopping by 🙏🏽🦾👨🏻🔧
@patrickreynolds801
Жыл бұрын
Slam dunk my man
@Ajunkman
Жыл бұрын
Yes sir!!🙏🏽👨🏻🔧😎
@Ron_D33713
3 ай бұрын
This mf so cold ice would get jealous 😂, yo I need to be down with this cat as much work as I see around the crib.
@Ajunkman
2 ай бұрын
Hahahahaha thanks man 🧊 I appreciate you stopping by 🦾👨🏻🔧
@user-to1sq5gh8t
Ай бұрын
Where is it?
@thesetruths1404
Күн бұрын
Nice video. Would you do anything differently if you did it again? I have a 05 4x4 Yukon 5.3L. 233,000 miles. Looking to get a used cheap broken 4L60/65/70 to rebuild with my teen as a DIY learning project. To have ready. I found a used one for $60, with nothing but Reverse working. Thanks!
@WildAthletics
Жыл бұрын
I'm going to try and find a 4x4 700r4 (later year around 92) at one of my local junkyards to fix my first vehicle ('92 Chevy Blazer) Do you come across those transmissions very often? Really love your content. Keep it up!
@KD0LRG
Жыл бұрын
I don't see many in Michigan just due to the cars or trucks rusted out 20 years ago. I would question anything in the yard that isn't a crash car.
@Ajunkman
Жыл бұрын
Yes sir I just pulled one of those last week!! I’ll record my next one! Yeah I come across them but they are getting a bit harder to find as time goes by Man, Thanks for watching I appreciate the support 🙏🏽🥹🙏🏽🥹🙏🏽🥹🦾👨🏻🔧🦾👨🏻🔧
@Ajunkman
Жыл бұрын
@@KD0LRG yes sir! Anything not wrecked inspect thoroughly!
@gdmusic7990
6 ай бұрын
U make it look so easy lol
@jeremyhanna3852
2 ай бұрын
I believe your cousins own a shop in slc ut they specialize in swapping triton v8 and v10 in 99 to current f150 250 and superdutys got to buy jasper crate engine from them but u drop the truck off before 7am on weekday its done by noon or you drop it at noon and its done by 5pm that day its 3 brothers its all they do they are quick they do 2 a day its the crate engine price plus 1000 labor
@davidtrisha1469
Жыл бұрын
🤘
@Ajunkman
Жыл бұрын
🤙🏽🤙🏽
@rlfdavin
Жыл бұрын
so if i want to keep the torque converter and flexplate to swap onto my 5.3 should i do it this way as well? pull trans... then torque converter? or should i take out the torque converter bolts and pull the trans and torque converter as 1 piece? then grab the flex plate. since its gonna go back onto my suburban?
@Ajunkman
Жыл бұрын
If you’re doing it at home with a transmission jack with no potential falling impact it’s best to remove it in one unit, I remove the transmission first and torque converter afterwards because if you leave it in there’s a chance you can break the pump or damage the shaft it’s happened to me before, it’s just heavier and falls awkwardly and can get pretty dangerous Thanks for watching 🤙🏽👨🏻🔧
@mwshroomking
3 ай бұрын
Took bro longer to change sockets than anything image if he had a lift ... savage
@Ajunkman
2 ай бұрын
Wish the socket can just appear in my hands I’ll be under 5mins for sure lol thanks for stopping by!! 🦾👨🏻🔧🙏🏽
@XanderValdez-lc1xz
6 ай бұрын
So if I wanted too use one of these transmisssion out of an envoy or it’s all I can find how would I go about putting it in my 5.3 ls will the bell housing line up or would I have too use my old bell housing and torque converter?
@Ajunkman
4 ай бұрын
Yes it’ll work just make sure the front shaft is the same some of the trailblazers have that ugly mini shaft with the tiny torque converter Sorry for the late reply been super busy these past couple months have 10 more videos getting ready to be uploaded 🦾👨🏻🔧🔩🙏🏽
@rickjones6798
2 ай бұрын
I did two trannies but they were four-wheel drive on envoy and it took me a week but I'm 62 also
@Ajunkman
2 ай бұрын
Good job bro 🦾👨🏻🔧 thanks for stopping by 🙏🏽
@jeremyhanna3852
2 ай бұрын
I thought i was good at 1hr put i also pull the pan first see if the clutche are in the pan and i pull the convert bolts threw starter hole
@dmperfection
4 ай бұрын
If I did it like this on my truck how would I ever be able to put it back together! 😂
@Ajunkman
4 ай бұрын
It’s not meant to do it on your truck 🤣 Go to the junkyard and have fun! 👨🏻🔧
@tommygarcia7406
2 ай бұрын
He came prepared with tools.
@briankriss7310
2 ай бұрын
LOL man you took that apart so fast what'd you do work in a Chop Shop? You know I'm only joking correct? I know when you do this stuff for years you know exactly what you're doing and how fast you can do it I've been there
@Ajunkman
2 ай бұрын
HAHAHAHA that was funny!! Thanks bro I appreciate the feedback and just like you said after 14 years I better be able to pull it off this fast lol!!! Thanks for stopping by 🙏🏽🦾👨🏻🔧 I have a lot more videos coming soon!
@getums01
3 ай бұрын
What brand socket swivel are you using?
@Ajunkman
2 ай бұрын
Snap on 1/2” part no. IP80D Best swivel I’ve ever used 7 years deep with this one
@waltercardenas7354
Жыл бұрын
How come you did not take the oil pan out before to see the moment of true?
@Ajunkman
11 ай бұрын
Sometimes they just smell so good!
@mikeh5039
5 ай бұрын
8 minutes lol 😂
@Ajunkman
5 ай бұрын
Guys a legend 😅😂
@ALCRAN2010
Ай бұрын
How long to uninstall a couple cats?? 😂😂😂
@user-cq2nj9bb7u
6 ай бұрын
What is better to rebuild a transmission or get another one from junkyard
@GutterGuys
6 ай бұрын
Try a junk yard bro find truck that’s smashed in the front that’s usually a good bet
@Ajunkman
4 ай бұрын
Smart man! What this guy said ☝🏽 Appreciate y’all for stopping by 🦾👨🏻🔧🔩
@allendaigle6351
14 күн бұрын
Dude stole it😂
@AmusedCamping-ms7uz
5 ай бұрын
how did you lift this back in your car?
@Ajunkman
5 ай бұрын
With my arms lol
@johnrogers2849
3 ай бұрын
torque converter needs to be unbolted before removing the transmission if you are trying to save the front seal and bushing.
@Ajunkman
2 ай бұрын
False. Last 500 transmissions I’ve pulled front seal bushing have never been harmed. Stop spreading fake info it’s not good for the industry. Or make videos explaining why and tag me later. It’s actually safer to remove the way I do it I’ve broke bell housings letting them slam on the floor before with torque converter inside. Go make some videos and teach me.
@johnrogers2849
2 ай бұрын
@@Ajunkman You are honestly telling me you believe that is the proper way to remove a transmission?
@johnrogers2849
2 ай бұрын
Oh and not a junkyard transmission. Spend some time in a professional shop working on automobiles and you will never see a transmission pulled with the torque converter still bolted to the flywheel unless the motor can not be rotated to get it out.
@Ajunkman
2 ай бұрын
@johnrogers2849 I can get you $1000 I’ll do it faster than you any way you want yo do it princess. We don’t work off the book around here we get shit done
@Ajunkman
2 ай бұрын
Lmao. I’m at a junkyard not at a professional shop Mija.
@GOMEZJ76
Жыл бұрын
What do you do with them? Resell them or rebuild or??
@Ajunkman
Жыл бұрын
All of the above brotha 👨🏻🔧
@user-ql7jx9ge4e
Ай бұрын
Should leave the 4L60 in the junk yard. Scrap transmission lol
@arresthillary9502
Ай бұрын
mine has 269,000 on it. is that junk?
@BONDRO
Жыл бұрын
How much do they cost you
@Ajunkman
Жыл бұрын
Thanks for watching! 🙏🏽👨🏻🔧 A couple hundred bucks
@teeturnswrenches504
3 ай бұрын
Takes me 2 hours maybe lol god damn
@Ajunkman
2 ай бұрын
Hahaha thanks for stopping by bro🙏🏽 been doing this my whole life 🥴🦾👨🏻🔧
@grifonks
Жыл бұрын
I saw that thumbnail of someone carrying a big auto transmission and my mouth dropped open. m15 caps suck
@Ajunkman
Жыл бұрын
Haha!! I almost put one on my shoulder today for the next thumbnail! Maybe tomorrow 🤣 thanks for watching bro 👨🏻🔧🙏🏽
@carsandhealthtoddrosenzwei2661
4 ай бұрын
Loose nuts are flying everywhere! This guy is a master
@Ajunkman
4 ай бұрын
🔩⚡️🔩⚡️🔩⚡️I appreciate the feedback brotha 🙏🏽🦾👨🏻🔧 thanks for stopping by !!
@datz_nice_805
11 ай бұрын
How much u pay for them
@Ajunkman
11 ай бұрын
$350-$400
@UceT23204
22 күн бұрын
Not your first rodeo lol
@Ajunkman
16 күн бұрын
🤠 lol no sir
@CoquettaRomero
2 ай бұрын
Rock Star
@joshryan9727
3 ай бұрын
No way that's up north. Every bolt would have been a problem 😂💯
@Ajunkman
2 ай бұрын
Hahahahah I’ll attack rusty bolts the same way bro I’m 6’3 250lbs there ain’t a bolt on this planet I’m not cracking lol anyways thanks for watching 🦾👨🏻🔧🙏🏽
@natepitts6255
6 ай бұрын
When you don't care it's easy to pull
@Ajunkman
6 ай бұрын
Caring is for women or soft men
@mikeh5039
5 ай бұрын
Nope
@Ajunkman
5 ай бұрын
🤡
@Ajunkman
5 ай бұрын
Yes Mike. Yes.
@budthechud3408
6 ай бұрын
How can propping a vehicle on rims be safe? i mean come on!!!
@Ajunkman
6 ай бұрын
Have you ever done it or are you just a keyboard warrior?? Has your life ever been saved multiple times by “propped rims” if the answer is no then keep your opinions to yourself leave the tough work to real men mija
@budthechud3408
6 ай бұрын
Take a chill pill dude your blood pressure is going up!@@Ajunkman
@Ajunkman
6 ай бұрын
@@budthechud3408 lol what a womanly response. Take care. Show your face online if you’re going to be critiquing.
@budthechud3408
6 ай бұрын
@@Ajunkman lay off the roids dude seriously! the alpha act is played out and pathetic!
@user-tk8it1vv1i
27 күн бұрын
More like 30 to 60 minutes... u probably edited this video
@Ajunkman
27 күн бұрын
🤣🤣🤣🤣 I have 100+ other videos of me doing it in under 10-12mins. Stop hating.
@RodrigoRodriguez-ff8by
2 ай бұрын
🤢🤢🤢🤢🤢🤢
@eddiejacks9512
9 ай бұрын
Are you in Tx if so I have a job for you since you can do it in 8 mins....think i just lost my transmission.
Пікірлер: 152