Just bought one for delivery tomorrow. Hope i made the right choice.
@theautodidacticman_
5 жыл бұрын
MM0SDK did you make the right choice?
@sergiocavazos8963
5 жыл бұрын
Have mixed feelings for this radio.... very well designed , good battery, good sound, good reception,.... in the other side so frustated with the radio freezing even so that if you turn the radio off the screen remains lid (and frozzen), sometimes even after removing and putting again the batterry does not help and have to reset losses the codeplug... have done firmware update, reseting, and so and so.... anybody with the same frustation??
@digitalanaloguehamradio
5 жыл бұрын
Sergio Cavazos I have had no freezing here
@sergiocavazos8963
5 жыл бұрын
@@digitalanaloguehamradio tks can you tell me whats the hardware version and firmware version you have installed please ??
@digitalanaloguehamradio
5 жыл бұрын
Sergio Cavazos This is an old video. Get the latest firmware and software which must be used together and remove your old software first and back up your code plug. Get it from Anytone.de
@digitalanaloguehamradio
5 жыл бұрын
Sergio Cavazos Hardware 1.1 I think I no longer have the radio
@JeffBishopVE6EFR
4 ай бұрын
Thanks for the review. I just received the 868 and thus far am very pleased with it. The battery died so I thought I would watch a few youtube videos while I wait for it to replenish. 73 - Jeff VE6DV
@digitalanaloguehamradio
4 ай бұрын
Hey, thanks for watching. It's a bit of an old video, but most things are the same. You have purchased a great radio enjoy
@icom-pi6tp
3 ай бұрын
Mine 2018 has been deaf on analog compared to other radios, TYT 380,Alinco dual band . DMR is excellent however. Tried different antennas as well
@digitalanaloguehamradio
3 ай бұрын
Strange. The 380 Is a super hetradine and a very good receiver. And it's only one band so i'm not surprised that is very good. Any tone is direct conversion. It is good on analog But I wouldn't say it's the best receiver out there. However I agree with you. It is very, very good on digital
@fredwest2765
5 жыл бұрын
Hi Chris cracking video. Had my 868 for three days I was at first completely baffled I am not as baffled now that is learnt a lot but not sure how to make my first contact. Any chance you could do a video called first contact on a 868 just for this numpty G1SCY Fred
@digitalanaloguehamradio
5 жыл бұрын
Make sure you have watched this video Fred kzitem.info/news/bejne/s2aimZ6XaZVoono
@arthurdent8091
5 жыл бұрын
Hi Chris. Tom here from the U.S.A., NO3NO. Just to let you know I purchased a HD-1 based on what you primarily and others have said. I hope that I can remember all the command sequences that this radio and my D-74 require. I enjoy mostly all of your videos. I hope that you keep on making them. Say Hello to Chris Barnatt for me. Another very good source of videos, primarily on the Raspberry Pi. Cheers.
@digitalanaloguehamradio
5 жыл бұрын
Thanks for the comments Tom much appreciated. The HD1 is a great radio i have had no problems with it
@B83024
Жыл бұрын
Is the Anytone 868 a FCC part 90 approved if so can u PLEASE do a video about it Thanks !
@digitalanaloguehamradio
Жыл бұрын
It is legal to use in America. I don’t Have one anymore, although I have done loads of videos on it in the past, take a look back
@Amanet13
4 жыл бұрын
Mine arives tomorrow,saved some money instead of 878 Bluetooth I hope I didn’t made a big mistake.Like your videos thanx
@ianevans67
4 жыл бұрын
Later models of the 868 have the black screen you may be able to do a firmware update and get the black screen
@JohnGlueck
4 жыл бұрын
If I have the 868 in scan mode and it stops on a active channel, if I want to talk then I need to stop the scan function. The radio will default to the first channel, I need to then use the dial to select the active channel. If I press transmit on the active channel, is there a way for the radio to remain on the active channel without going back to the first channel? I am on firmware ver 2.36 and hardware ver 1.10.
@hobojon44
5 жыл бұрын
I have the 868 cant decide if I want hot spot or wait for reppeater
@Pete4000uk
5 жыл бұрын
Get a hotspot!
@MyVikinglife
4 жыл бұрын
The new firmware (2020) gives you the black background screen.
@digitalanaloguehamradio
4 жыл бұрын
Yes good info Barry this is an old video. Thanks for watching
@MikeM0XMX
4 жыл бұрын
Really good video. Looking to maybe get one to learn and this has helped me decide.
@digitalanaloguehamradio
4 жыл бұрын
This is a super radio for the price. But for a little bit more you can get the 878 and that is my current recommendation. If you want to use in the car get the 878+ your speaker and microphone will goes through the car stereo Bluetooth. And don’t forget this will work well on FM repeaters as well. Your voice will go through the car stereo microphone and you will hear everybody on FM and dmr through the car stereo. You will get a tiny transmit button which you can strap to the gearstick
@dannyhui8397
5 жыл бұрын
Good summary Chris. Just out of curiosity, are you intending on putting up any videos of the Analogue performance and also how does it compare in general to other HTs like the Ailunce HD1? 73 2M0XDE
@digitalanaloguehamradio
5 жыл бұрын
Hi Danny. Thanks for putting the comment in. This is a video I will be considering doing analogue 868 vs HD1 they are both direct conversion and not superheterodyne
@johnnylt82
3 жыл бұрын
I pick up quite a bit but the sound quality is terrible also one minute you can hear a channel the next you can't
@digitalanaloguehamradio
3 жыл бұрын
If it's digital and it's breaking up it can be for many reasons. Internet metal case hot spot loads of reasons
@johnnylt82
3 жыл бұрын
@@digitalanaloguehamradio cheers, yea got a bit of more used to it now think I was just picking up poor signal channels I'm not a ham just using as a scanner and must say it's brilliant
@digitalanaloguehamradio
3 жыл бұрын
@@johnnylt82 awesome. Thanks for watching
@Telyron
Жыл бұрын
What is better this one or the TYT uv390 GPS
@digitalanaloguehamradio
Жыл бұрын
868 is far better
@digitalanaloguehamradio
Жыл бұрын
I would get an 878 if you could afford one
@justinheflin9416
3 жыл бұрын
Did you ever review the analog receive of the 868. I'm looking at buying 20 of these for my fire department. We primarily use Analog VHF for both 2 tone paging and communication. Trying to see if this would be a problem. Thanks for the video I look forward to your response.
@digitalanaloguehamradio
3 жыл бұрын
The FM receiver is is direct conversion. Which is not as good as superheterodyne. But it's pretty good. I think you will be reasonably impressed.
@justinheflin9416
3 жыл бұрын
Do you know if I can simplify the operation of the radio? I would like to get it down to the selector knob and one PTT button for easy operation.
@ea5jav
4 жыл бұрын
Enjoyed your video on the 868, thank you. One question can it be wide banded on analogue to pickup 446 mhz PMR?
@digitalanaloguehamradio
4 жыл бұрын
It will receive for 446 no problem. But to keep things legal it will not transmit on there. Although you could probably rollback the firmware to transmit and lose lots of handy features.
@ea5jav
4 жыл бұрын
@@digitalanaloguehamradio Thanks for getting back to me, very good radio which I'm thinking of getting along with the new Shark RF Open Spot 3. Will subscribe to your channel, 73's
@cptnmedic
4 жыл бұрын
Which do you prefer, the Ailunce HD1 or Anytone 868
@digitalanaloguehamradio
4 жыл бұрын
868 although 878 if you can afford one. Hd1 is falling behind.
@beijybua6313
5 жыл бұрын
Hello I have troubles with my 878, it sends allways on TS1, in the Settings is TS2 and the blue TS2 is activated. Have one a Idea?? Whats wrong??
@digitalanaloguehamradio
5 жыл бұрын
BEIJY BUA Somewhere in the settings is tdma. If you tick this The radio will be teir 2 and will use two slots.
@beijybua6313
5 жыл бұрын
@@digitalanaloguehamradio Sorry , the Problem it seems to be fixed by the SysOp from the Repeater. He restart the Repeater, and now it works. The Monitor Settings in my Case is Digital Monitor /Switch / Double to Hear TS1 and TS2 at the same Time. Thanks for your Idea
@JustLearning
5 жыл бұрын
I have this radio the AnyTone 868. Good review. Personally I would rather use a hot spot than tie up a repeater. Since getting the Jumbo spot and the Commander II, I only use them to talk to others on DMR. And I can use my cell phone to connect the radio to the hot spot and talk from anywhere without having to upload the repeaters in other locations. Simple. I wonder if there is a way to get the 878 software onto the 868 to make it act like an 878.
@digitalanaloguehamradio
5 жыл бұрын
Thanks for the comment. The 868 has a little less memory than the 878. So it is incredibly similar hardware just with restrictions.They could easily implement the display colour change. If they removed the memory reserved for recording function. But that won't happen because they want you to buy the 878.
Does the record option work for you? On my D868UV it doesn't. It only records 1-2 seconds of a transmission.
@digitalanaloguehamradio
5 жыл бұрын
Excellent question something I have never tried. I recorded a 30 second clip but only one second played
@TomSP9TL
5 жыл бұрын
@@digitalanaloguehamradio so it seems like a bug. Or maybe it only works in direct QSO? That I haven't tried. I've emailed AnyTone with this issue already, but no reply so far. Will give them few more days before my next contact with them.
@digitalanaloguehamradio
5 жыл бұрын
Same on my radio just 1 or 2 seconds
@garryt2533
5 жыл бұрын
Chris, Just in case you don't know. If you upgrade this to firmware 2.34 - you get the black screen like the 878.
@digitalanaloguehamradio
5 жыл бұрын
Garry T Yes thank you for mentioning this. I have since bought a 878 and I am aware of this but handy for other people to know. I have got an 878 review coming out in the next day or so!
I don't think so although it can can listen to any DMR type communication as long as it is not encrypted. It picks up virtually everything my Whistler scanner does
@garryt2533
5 жыл бұрын
Good review. I have one of these, but it doesn't have the volume bar on screen like I've seen on all the others?
@digitalanaloguehamradio
5 жыл бұрын
There is a setting in the computer software for this. I am not by the computer at the moment but I know this as a fact.
@garryt2533
5 жыл бұрын
@@digitalanaloguehamradio Thanks Chris - I'll take a look later
@henrylikesradios
5 жыл бұрын
You can turn it on or off only in the software
@Nonvido
5 жыл бұрын
Noticed you had the volume all the way up, but the radio was not very loud. That could be a problem for me as I would like to be able to turn it up or down and have it at a comfortable volume.
@digitalanaloguehamradio
5 жыл бұрын
I had it like that so it was not too loud it's called indoor volume setting.
Пікірлер: 65