Still helping people 2 year later haha. I just got mine in today just to find out all the LEDs I bought for the housings don’t fit.. Thanks for tagging the bulbs you installed, saved me a headache and research.
@AutoHeadz
Жыл бұрын
Haha! My pleasure. BTW I still have the headlights on the truck and they look and work like the day I installed them so ENJOY! They are great!
@AlexHernandez-bx5eh
10 ай бұрын
The best informative video on insulation I’ve ever seen great patients great direction thank you. I feel more confident installing my lights.
@AutoHeadz
10 ай бұрын
🙏🏻
@eugenedw
3 жыл бұрын
Thanks for the video. Very well done and easy to follow (even at 1.5 speed). With this one and the Raptor Grill Install video, my 2015 F150 is complete, for now. Looks great! Next, 1” lift kit, new set of Venom Power Terra X/Ts, and a Borla exhaust system to button things up.
@jonp761
3 жыл бұрын
Thanks for posting this. I just did the install on my 2017 this past weekend. I found the part about splicing into the turn signal wiring very helpful and easy to remember.
@AutoHeadz
3 жыл бұрын
Thank you so much for saying this. I’m glad you found it helpful and thank you for the positive feedback.
@AndrewNobleOfficial
3 жыл бұрын
looks so good dude! so glad the whole bumper doesn't have to come off.
@AutoHeadz
3 жыл бұрын
Thank you! I’m in love with them. Yeah man, easy install really.
@TheMedicmudder
2 жыл бұрын
Fantastic video love how you broke everything down, one step missed sometimes and messes the whole thing up,but You were a lot of help in this install thanks!!!
@AutoHeadz
2 жыл бұрын
Thanks for taking the time to say this. It really does mean a lot to hear this. I’ll try to keep the step by step installs and reviews coming!
@thecosplaynoobj3872
11 ай бұрын
Just used your video today to put my gen 2’s in. Thank you for the vids you do.
@AutoHeadz
11 ай бұрын
I appreciate that man. Gen 2 Anzos?
@AutoHeadz
11 ай бұрын
How do you like them?
@thecosplaynoobj3872
11 ай бұрын
Yes sir. The Gen2 Anzos. I absolutely love them!! I did ask another question here about the plank light bar and when are the times it actually glows white. In DR is it just the projector bulb that glows or are the planks supposed to glow? Thanks for responding. Much appreciated
@srakfleming5888
18 күн бұрын
Great Video. Thanks. the low beam up and down adjustment is that top screw. How do you adjust the high beam up and down?
@robdee2014
2 ай бұрын
This was perfect Thank you for the help on the install
@AutoHeadz
2 ай бұрын
My pleasure Sir.
@robdee2014
2 ай бұрын
@@AutoHeadz I have a problem with the passenger side headlight. Hoping you can help. When unlocking/locking the outer ring stays white does not change to amber at all, while the driver side does both. any suggestions????
@josemaniaa4873
3 жыл бұрын
This installation video is top notch . Best one I’ve seen by far
@AutoHeadz
3 жыл бұрын
Thank you so much for saying that. If you have someone that would also use it please share. Happy 4th!! 🇺🇸
@adamchaffee1946
Ай бұрын
Dude this video is amazing, thank you so much
@AutoHeadz
Ай бұрын
No problem!
@johnboyte
2 жыл бұрын
Thanks for the video, I can't wait to use it for my install! I have a quick question... Can I use those LED lights you reference (NINEO) for both the high beams and low beams? Thanks Again!!
@ashtonchilcote5093
11 ай бұрын
Great video! The link for the upgraded bulbs is broken. Could you update? Also wondering if you can replace the bulbs without removing the whole headlight assembly? I'm ready to install the lights but don't have the bulbs so wondering if I should wait and replace the bulbs before install.
@AutoHeadz
9 ай бұрын
Hey man thanks for letting me know. Link should be all set now.
@TOZWS6
3 жыл бұрын
Awesome detailed and gentle installation video. Wish it was a 2018 👍
@AutoHeadz
3 жыл бұрын
Thank you for saying that. Love hearing positive feedback like this. Have a great weekend.
@TOZWS6
3 жыл бұрын
@@AutoHeadz your welcome brother, you do the same.
@David-oj4xj
Ай бұрын
Thank you for your help you are the best
@AutoHeadz
Ай бұрын
Wow! Thanks for saying that! How do you like them so far?
@mcesarey
9 ай бұрын
I'm following along step-by-step with your video and it seems the 9/32 bolts are actually 7mm...so far great job
@AutoHeadz
9 ай бұрын
Haha! Awesome man. More of a metric guy myself too. Thank you for saying that. Happy new year!
@mcesarey
9 ай бұрын
Also wanted to say that those wires from the headlights were pre-stripped much like an old school aftermarket head unit. I clipped that part off of the wires and the clamps worked much better. Install turned out perfect, thanks for the video @@AutoHeadz
@MrRoadMonster
3 жыл бұрын
I love the look and am interested in getting some. Did you upgrade the headlights to an LED or HID bulb when displaying them at the end of the video, or are those the stock halogens that came with the assembly?
@AutoHeadz
2 жыл бұрын
I upgraded to these amzn.to/3B9BENy
@thecosplaynoobj3872
11 ай бұрын
I have a question. When your driving during the day are the projectors for the daytime running lights all that are on or is the plank light bar supposed to glow white as well? Thank you for any feed back
@AutoHeadz
9 ай бұрын
During the day all you see is the big projector led. I switched mine to the nineo. Looks menacing driving during the day.
@TFBJFord
3 жыл бұрын
The anzos look good!! I have the alpharex headlights on mine. I was going to go with anzo though. Good video man! Are you still running factory taillights as well?
@AutoHeadz
3 жыл бұрын
Thank you! The Alpharex are very nice too. I still have the factory taillights. That’s next 🤙🏻
@cjitty
Жыл бұрын
Best one yet great job
@AutoHeadz
Жыл бұрын
Made my night.
@samuelzukauskas8233
3 жыл бұрын
Headlights look sick! Ps5 giveaway!!!!
@AutoHeadz
3 жыл бұрын
Thanks! You wish!!!
@CharlieScholz-f3h
10 ай бұрын
Don’t know if you’ll respond to this but I got these last week and got them put in to find out they don’t work because of the main headlight plug doesn’t clip on or doesn’t have a clip slot for it to fit securely enough to maintain connection do you got any ideas to fix that? I’m afraid they wont take it back through the warranty.
@rave6094
10 ай бұрын
This just saved my ass thanks bro
@AutoHeadz
10 ай бұрын
😂 Enjoy the upgrade. More content coming very soon. Don’t forget to sub. 🤙🏻
@AutoHeadz
3 жыл бұрын
🚨LINK TO ANZO HEADLIGHTS amzn.to/3ASZZ7d 🚨LOW BEAM UPGRADE - amzn.to/48uTOr2 🚨LED TURN SIGNALS - amzn.to/3MMT99T UPDATE : I have had these lights now for almost 2 years with ZERO issues. The LEDS I put in also have had ZERO issues. Absolutely love the upgrade.
@Flores97Drummin
9 ай бұрын
I installed my anzos a few years ago now. Having issues with one of my low beams not working and a high beam. I’m going to give the bulbs you are running a try. Are the his and lows both H7?
@AutoHeadz
9 ай бұрын
Stand by. I’ll send you the new link. Old one is wrong
@AutoHeadz
9 ай бұрын
Here it is amzn.to/48uTOr2. They are both H7
@Flores97Drummin
9 ай бұрын
@@AutoHeadz thanks man. Gonna have to order these and see how they work. Are you still running them both in hi and lows currently? I have the brand crystalux HIDs for lows and LEDs for my his. They’ve only lasted me I want to say almost 3 years so hope these will fix them.
@AutoHeadz
9 ай бұрын
@Flores97Drummin yes these are the same ones I’ve had for 3 ish years. Still great no issues.
@Flores97Drummin
9 ай бұрын
@@AutoHeadz glad to hear! Thanks again.
@andrewbelleza4417
9 ай бұрын
Thank you for this! Can you share an updated link for the LED bulbs? The link is dead.. 😅
@AutoHeadz
9 ай бұрын
Oh sorry about that. Here is the updated link - amzn.to/3O7UGtx Still running these 3 years later no issue.
@andrewbelleza4417
9 ай бұрын
Thank you so much!
@AutoHeadz
9 ай бұрын
@andrewbelleza4417 Thanks for letting me know the link was dead. Happy modding and happy new year! 🎊🎈🎆
@F150EcoBeast
3 жыл бұрын
Really like them anzos. You should get some switchbacks to match with the drl strip 🤙🏼
@AutoHeadz
3 жыл бұрын
Lol…funny you say that…I already do lol. kzitem.info/news/bejne/0niayaabmmR4pH4
@F150EcoBeast
3 жыл бұрын
@@AutoHeadz meant for the turn signals, my bad 🤦♂️
@robdee2014
Ай бұрын
@autoheadz I have a problem with the passenger side headlight. Hoping you can help. When unlocking/locking the outer ring stays white does not change to amber at all, while the driver side does both. Any suggestions???
@AutoHeadz
Ай бұрын
Did you wire it up as seen in the video or different?
@pgoularte
Жыл бұрын
I purchased the Anzo's with both suggested LED's for lows and turn signal. Installed and passenger side worked great, but install on the driver side left me with a dead high and low beam. :( Switchback turn signal and parking light work fine in the passenger housing, just nothing on the high or low beams. Put the halogen back into the low just to see if it was the replacement led causing an issue and still nothing. Is there some obvious thing I can check before assuming it's a defective Anzo housing? Thanks!
@AutoHeadz
Жыл бұрын
Hey man. Shoot me an email real quick. AutoHeadzf150@gmail.com I think I know what your problem is.
@masonmiller9658
2 жыл бұрын
Great help! Thanks!
@AutoHeadz
2 жыл бұрын
Thank you! Thanks for checking out my video. Make sure you subscribe I got some big stuff coming out this month I know you will like. Have a good weekend man.
@kirbyjames2032
2 жыл бұрын
Amazing video thank you
@AutoHeadz
2 жыл бұрын
Dude!!! Thank you for saying that!
@vortexxrc6405
Жыл бұрын
fricking amazing video
@AutoHeadz
Жыл бұрын
Thank you for saying that!
@joelane4670
Жыл бұрын
Did you ever add LEDs low beams? And did you have any trouble installing them. Great step by step video..Thank you!
@AutoHeadz
Жыл бұрын
Yes I did. I swapped out the low beams and the turn signals for upgraded LEDS. I appreciate you saying that. I put the bulbs I used in the video description. Thanks again.
@joelane4670
Жыл бұрын
@@AutoHeadz I appreciate you responding so quickly..Amazon has those lights on sale for now,would love to grab a pair! And when most us are going to take a DIY on we need every bit of help we can get..some videos will skip forward through so sections assuming we should just know that little part,you really do the entire install start to finish. So thanks again..peace!
@joelane4670
Жыл бұрын
@@AutoHeadz sorry for so many questions. But the replacement led bulbs you instilled in the anzos. Did you have any issues with size and error codes? Just wanna order everything at once. Thanks!
@AutoHeadz
Жыл бұрын
The link for the upgraded LOWBEAMS and TURN SIGNALS BELOW👇🏻 Lowbeams - amzn.to/40ZNGUd Turn signals - amzn.to/3S3LOWi
@AutoHeadz
Жыл бұрын
@joe lane Thank you for all the kind words. I love when I hear positive feedback. I put the link to all these in the first comment of this video. Everything works absolutely flawlessly. No issues across the board almost 2 years.
@AspectAlex
Жыл бұрын
Question, I bought these a few months ago. However I want to put LEDS in the turn signal spots and I can. But for some reason on the Anzo insert where the turn signal socket goes in is a different size as the factory one. So without hard wiring in resistor’s how and or where can I get the right sized sockets that will fit in the Anzos insert? It’s really annoying. I also bought the resistors where you just put the LED bulb in and plug it in to the OEM connector. Can you please help me?
@AutoHeadz
Жыл бұрын
I got you man. Shoot me an email and I’ll explain.
@AspectAlex
Жыл бұрын
@@AutoHeadz Awesome. Thanks man!
@DanielGonzalez-bv2fv
10 ай бұрын
Hey man what’s the difference in anzo or amerilite
@AutoHeadz
9 ай бұрын
I’m not familiar with Amerilite sorry.
@limitlessautomedia9794
2 жыл бұрын
Will aftermarket led bulbs fit the caps on these headlights. I have aftermarket led bulbs from American muscle
@AutoHeadz
2 жыл бұрын
Only specific ones will fit. These are the ones I used. amzn.to/3MQW9Cf
@jimbenning3717
2 жыл бұрын
Hey bro I know I’m commenting on this a year later. But I’m super pumped I jus ordered my anzo headlights and I’m pretty confused on what to do because I thought the lights that come with the anzo will be perfect. I don’t have any extra money to spend on the bulbs because of a tight budget. So I was wondering is the factory lights really that bad?
@AutoHeadz
2 жыл бұрын
No they aren’t that bad. If you ever want to save up and upgrade in the future you can do that too. The low beam I installed are definitely a huge upgrade. They are 40 bucks so it’s up to you. Check em out - amzn.to/3B9BENy
@AutoHeadz
2 жыл бұрын
Honestly I think you should do the upgrade while you have easy access to the lights. They aren’t two expensive and I think they are worth the upgrade.
@jimbenning3717
2 жыл бұрын
@@AutoHeadz hey I ended up buying the led for the low beams but now I’m have a problem with the metal clip that holds the bulb in place. Unfortunately when trying to take out the original bulb I bent the wire clip quite a bit . Due to that once I put my new led in and tried clipping the metal piece back it wouldn’t clip properly but I tried my best and kind have assed the clip onto the bulb. Is that fine? Or should I make sure to redo it and make the clip properly stick on.
@jimbenning3717
2 жыл бұрын
Half assed*^
@AutoHeadz
2 жыл бұрын
@@jimbenning3717 So those retainer clips typically do a good job at holding the light in. As long as you were able to get the wire clip up and over the light you should be ok. If it is so bent that you think the wire is not able to hold it in place maybe ensure that it is locked in. Hope that helps. I’m glad you went with the upgraded bulb. Which one did you get?
@jwalkerftw
2 жыл бұрын
What is the splicing for man? For the switchback function?
@AutoHeadz
2 жыл бұрын
Yes, exactly.
@jwalkerftw
2 жыл бұрын
So if you don’t splice the turn signal won’t work? Can you still use the lights turn signal without having to splice?
@AutoHeadz
2 жыл бұрын
I’m actually not sure. No one has ever asked me that. I’m assuming it would still work it would just flash white and not yellow but I’m not 100% sure.
@shieldoftrust
2 жыл бұрын
Does the planks stay on as daylight running lights?
@AutoHeadz
2 жыл бұрын
No the planks only come on at night or you can just turn the lights on. The low beam turns on as the DRL. Looks pretty sweet with the LED Sphere.
@JesusHerrera-km5gv
Жыл бұрын
These better then the morimotos?
@JesusHerrera-km5gv
Жыл бұрын
Or brighter?
@AutoHeadz
Жыл бұрын
I think so. I like how you can’t see the individual led lights on the Anzo’s. Plus the Anzo’s are about $200 cheaper.
@snakegt5008
2 жыл бұрын
Did you change the bulbs on the anzo or use the bulbs that came in it ?
@AutoHeadz
2 жыл бұрын
Yes I changed them out. Only a few bulbs will work. These are the ones I used. amzn.to/3udHdXq
@snakegt5008
2 жыл бұрын
@@AutoHeadz thanks for the link, I see different options listed does it matter which one ?
@AutoHeadz
2 жыл бұрын
Yes. It’s the “H7” version
@snakegt5008
2 жыл бұрын
@@AutoHeadz thanks alot! just ordered them and all the auxito lights for the back
@AutoHeadz
2 жыл бұрын
Sweet man! You will love them. Let me know how they work out 👍🏻
@tfoz2235
21 күн бұрын
As soon as I saw tge Scotch Loks, I was out.
@AutoHeadz
21 күн бұрын
People are afraid of them. I’ve never had an issue 🤷🏼
Пікірлер: 132