man crazy that you´re still around. watched your vids like 5 years ago. your dedication towards those aprillia 125s is really inspiring
@PochiRS
4 ай бұрын
Thank you for your support over the years. Sorry I've been slacking lately.
@markfoster6110
4 ай бұрын
Good you are back
@PochiRS
4 ай бұрын
it's been a while
@2strokerides
4 ай бұрын
Your engine is running to lean. Thats why the revs won't drop. Could be because of the cracked intake manifold. Carb could also be dirty or jetter wrong. Great video, good to see you back!
@PochiRS
4 ай бұрын
I agree. I couldn't get a good shot of it, but the carburettor is not in good condition either, with petrol seeping out of it. The first thing to be done is to replace the intake and disassemble and clean the carb. It will take some time to get the parts. After all, this is the Far East Japan.
@R-S-X
4 ай бұрын
Clean looking example. Slowly building one myself. Be interested to see how yours goes.
@PochiRS
4 ай бұрын
It's going to be heavier, but I'm going to see if I can fit cast wheels for RS125 on her.
@R-S-X
4 ай бұрын
@@PochiRS Yeah compared to your RS anything will be heavier lol, If you change the subframe I feel like it will save a lot of weight there. As for the swing arm. The one from Aprilia MX fits if you change the shock & linkage along with swing arm but it only saves like 0,3 KG.
@PochiRS
4 ай бұрын
That is going to be quite expensive. It's not really in my budget. And I'm looking for an AF-1 too. Let me know if you have any more good information. Thanks.
@R-S-X
4 ай бұрын
@@PochiRS Ahh okay. Not sure if sub/rear frame would cost much but I'm still getting around to it. The carb manifolds are quite rare for SX, Heard ones from the KTM may fit but haven't tried and may not reach airbox. Although HTM Racing may have something and also sell an adaptor to run a 320 disc if you don't make something, that is.
@PochiRS
4 ай бұрын
It's going to be a bit further down the line, but I'm thinking of asking HTM Racing to machine the cylinders, so I'll talk to them about things then.
@wolkan260
19 күн бұрын
goddamn your aprilia is in crazy good condition compared to what you can find here in Finland. All aprilias here are just abused. i also have one a sx125 with 140cc italkit if you want to check out my profile but it has been very abused but it still runs good. Rotax powahhhh!
@mickd8490
4 ай бұрын
What a great looking bike.
@PochiRS
4 ай бұрын
I was lucky to get her.
@Ganix16V
4 ай бұрын
Oh nice new bike! i wanted one of these when i was a teenager! :) good to see you back :D
@PochiRS
4 ай бұрын
It's a very rare motorcycle in Japan.
@SveduP3ll3
4 ай бұрын
Cool bike, I used to have one of these. The ugly steel swing arm can be replaced by a nicer aluminum one from an Aprilia MX 125.
@PochiRS
4 ай бұрын
Thanks for the great information provided. What model year is it for? I will look for it.
@bobbakdaj6888
4 ай бұрын
Yeah, you have the the sx linkage to a mx one as well. Nearly rebuild my sx 125 09 just waiting on phone call from powered coaters to collect the frame, swing arm and some other bits. Full nut and bolt rebuild from ground up.over a years work. Everything is done
@pruis3144
4 ай бұрын
Good to have you back! Hope you are staying for a while😅
@PochiRS
4 ай бұрын
Thanks!
@beanz6574
4 ай бұрын
nice, ive got an sx125 too, changed to vhsb34ld, v vorce3, 140ccm, rave2. it runs very good but i feel like the gears are alot shorter compared to the rs125. hope you are gonna post more about the sx
@PochiRS
4 ай бұрын
I have SmartCarb that I used the year before last, so I might install that. Might be space-constrained though.
@SeamTressGaming
4 ай бұрын
Nice find
@PochiRS
4 ай бұрын
Still looking for AF-1 too.
@BigBoyzToyz1974
4 ай бұрын
You will find that issue is usually caused by a slight air leak on the inlet boot from the carburettor..
@PochiRS
4 ай бұрын
I'll try spraying parts cleaner next time with the engine running.
@BigBoyzToyz1974
4 ай бұрын
@@PochiRS no it's the rubber boot that is in-between the carb and the engine block..👍
@PochiRS
4 ай бұрын
Slight air leaks on the inlet boot from the carburettor can be determined by spraying the engine with parts cleaner. This is because if there is a leak, the engine speed will increase. I thought, no?
@BigBoyzToyz1974
4 ай бұрын
@@PochiRS yes that's correct 💯👍
@jamesharbor7981
4 ай бұрын
i have great condition intake manifold for sale ! we break alot of rs 125s for parts and often get sx 125 parts. got loads of clutch covers for the sx
@PochiRS
4 ай бұрын
Parts are difficult to obtain in Japan. I'll make my own intake manifold for now.
@chris2414
4 ай бұрын
That sx looks completely stock. Looks like no ones messed with it which is pretty surprising. I own an aprilia mx 125 and iv seen people fit the swing arm and complete front end from the mx onto the sx. You end up with a much better quality rear swing arm and the huge disc and brembo brake upfront
@PochiRS
4 ай бұрын
This model is rarely distributed in Japan as there is no Japanese version. It's going to be difficult to get parts. It would be nice if external exteriors were inexpensive, even Chinese.
@chris2414
4 ай бұрын
@@PochiRS yeah thats the only problem with these bikes. The mx is the same you can't get parts anywhere even here in the UK. You can buy some engine parts and things like brake pads and sprockets but no plastics or seats or anything like that. China don't sell anything at all for our bikes
@PochiRS
4 ай бұрын
Then it is even more hopeless in Japan. I have to ride carefully. By the way, which do you recommend, GIANNELLI or Scalvini?
@chris2414
4 ай бұрын
@@PochiRS I have a gianelli on mine it sounds ok but if you search aprilia mx 125 scalvini on KZitem there's 2 guys showing off a mx 125 then he does a drive by and it sounds amazing. It sort of sound like a yamaha yz 125 or similar so I say go for a scalvini for sure
@chris2414
4 ай бұрын
@@PochiRS got to 5:00 minutes in the video when he does the drive by it sounds way better than any other exhaust you can get for the aprilia 125 2 stroke kzitem.info/news/bejne/r2iZ1qKQr6GHZ34si=OO1TcSh0cPBXiA0x
@vinnymorrissey7357
4 ай бұрын
The stator cover looks very nice! It must fit on the RS?
@PochiRS
4 ай бұрын
@pochigarage 1 秒前 The aprilia racing logo is cool, isn't it? However, it cannot be installed without removing the gear for the cell motor.
@vinnymorrissey7357
4 ай бұрын
@PochiRS very cool looking!! I have a '98 and '00 RS125. I missed your content.
@PochiRS
4 ай бұрын
I still prefer two-strokes. I'm not interested in the bikes of today.
Hi Pochi, I'm currently in Italy and I could help you looking for an AF-1 125. They're quite expensive now, mind that, but you could still find some. Let me know! Also look for KTM reed valves and intake boot, some years are compatible with rotax stud pattern. There are still some rotax 122 intake boots, ready to be mounted with the classic vhsb 34.
@PochiRS
4 ай бұрын
Is the AF-1 also expensive? I've been looking for an AF-1 because the MITO is too expensive to get, but I may need to rethink my plans.
@att49356
4 ай бұрын
@@PochiRS They are not cheaper than RS 125s, which are getting crazy high expensive - about 2500-4000 euros. It's a matter of luck basically. Market has been ruined by wannabe rich guys who overcharge for anything
@PochiRS
4 ай бұрын
That is incredibly expensive. I hope that its value is not yet well known in Japan.
@att49356
4 ай бұрын
@@PochiRS you could have more luck in Poland or UK where they're not that expensive. I could help for spare parts in case, as in here the market Is massive. Sadly we got to these bikes a bit too late and everything got expensive.
@PochiRS
4 ай бұрын
It varies from country to country. Hopefully I will have some lucky encounters.
@kyriakoskaraproimos7443
4 ай бұрын
Long time...
@PochiRS
4 ай бұрын
I was working on a sub-channel during that time. www.youtube.com/@pochigarage Only in Japanese, but subscribe to the channel if you like.
Пікірлер: 66