Eine schöne Idee. Spiele schon lange mit der Absicht, so einen Bausatz für alle Typen von analogen Radios zu entwickeln.
@radiofm7694
2 жыл бұрын
Very interesting project, works surprisingly well 👍
@damithj
2 жыл бұрын
Amazing work Dilshan!
@acestudioscouk-Ace-G0ACE
Жыл бұрын
This was very interesting and taught me a lot. Thank-you.😊👍
@DubiousEngineering
2 жыл бұрын
I wish there was more of an explanation about the design and how it works rather than just a build video and music. Interesting to know you have done it, but how!
@DilshanJayakody
2 жыл бұрын
Did you check blog post associated to this? jayakody2000lk.blogspot.com/2021/10/arduino-superheterodyne-receiver.html?m=1 This link is already mentioned in the video description. Hope this is helpful to you.
@carlosmarmeli2587
Жыл бұрын
Que praticidade iso que é serviço profissional 73 abs.
@jcbacol
6 ай бұрын
Excelente proyecto. pregunto... El si5351 tiene 3 relojes . se puede usar 2 clk, 1( uno) para IF y otro para el oscilador local?
@achalasamapriya2701
2 жыл бұрын
awesome .but keep in mind to use a ceramic screw driver to fine tune the IF transformers
@yofimee883
2 жыл бұрын
Proud of you bro! found you on #Hackaday !
@rusras5873
2 жыл бұрын
Good jobs👍
@meddiys6171
Жыл бұрын
Very well, but i haven't Si5351 module!!!!!!
@ashithariyapala3761
Жыл бұрын
Nice work Dilshan! I remember building superhets with those yellow , white and black IF sets back in school - used to get my stuff from Wikum radio nugegoda or Senith Electronics in Borella. Are these transformers still available? Kind regards Ash M0LKA.
@DilshanJayakody
Жыл бұрын
Hello Ashith, thanks for your comment and I think I am also from that era 😀. I hope you remember the MW, SW, and FM radio circuits in Senith Sipnana, Kumarasingha Radio Books, etc. I.F transformers are now quite difficult to find in the local market. I know a few places in Pettah whos having old stocks. A few months ago, I ordered some I.F transformers from AliExpress, and it seems cheaper than buying from a local market 😊.
@ashithariyapala3761
Жыл бұрын
@@DilshanJayakody! Yes :-) I remember the kits that Kumarasinghe Radio had... I went with my Father to Pettah as I was too young to go on my own back then - I got the AM/SW kit with the LA4102 audio amp(remember those?). The senith magazines were really good too, and most of my pocket money was spent in their shop , which was not far from my school - D.S :-). You have a great channel keep it up!
@damithj
2 жыл бұрын
How about taking the output into a PC and do the rest on the software like AGC...
@DilshanJayakody
2 жыл бұрын
Yes, this is a great idea! I also have plans to do a simple receiver design with a DSP core. Maybe a simplified DIY SDR receiver? :)
@damithj
2 жыл бұрын
@@DilshanJayakody Wow that would be cool! Wish I have time to do some too.. :)
@adambeedle
2 жыл бұрын
Cool!
@bsodmike
2 жыл бұрын
What bench equipment did you need to design these boards, spectrum analyzer & signal generator? Nicely done.
@DilshanJayakody
2 жыл бұрын
For this project, I used only an entry level RF signal generator. It (RF signal generator) is not mandatory for this project, you can also tune I.F transformers using a strong radio broadcast.
@bsodmike
2 жыл бұрын
@@DilshanJayakody I'll drop you an email, if you like I'd like to help moving this to a SMT single board design. May be it would be useful to be sold as a kit?
@hernanmarcucci7500
2 жыл бұрын
ecxelent job !! which level in dB do you put in the receicer ???
@DilshanJayakody
2 жыл бұрын
Thank you. The oscillator provides 3dBm output.
@Tektronics2007
Жыл бұрын
sir where can i bought si5351 module in sri lanka ?
@deeppramanick8809
2 жыл бұрын
1.Does the RF in(J1) from mixer to first IFT should be reversed, according to the schematic? i may be wrong. 2.can dector diode be used before 2nd if (for no reason) 3.curious about Sensitivity. thank you
@DilshanJayakody
2 жыл бұрын
Hi, 1. Wiring layout shown in the video is correct and tested. 2. Sorry, not much sure and clear about the configuration you suggested. 3. Yes, sensitivity is bit low on this receiver. I got string signals with my external antenna only.
@santhoshsd7240
2 жыл бұрын
👍👍👍
@carlosmarmeli2587
Жыл бұрын
Tem a venda ese produto para o Brasil Gotaria de ter uma resposta
@lesleypaulvj_TVPM
2 жыл бұрын
What mixer and product detector does it use?
@DilshanJayakody
2 жыл бұрын
It design around a standard superhet configuration and uses Germanium signal diode as detector. The full schematic is available in here: github.com/dilshan/arduino-superhet/blob/main/design/if-amp-455khz/if-amp-455-schematic.pdf
@lesleypaulvj_TVPM
2 жыл бұрын
@@DilshanJayakody Ok, will go through...
@bejo.2167
2 жыл бұрын
Shortwave
@propoliozello4272
Жыл бұрын
No pantalla lsd
@claudioalbertoortega
Жыл бұрын
Hi There. How/where does the circuit reject image frequencies? -- en.wikipedia.org/wiki/Superheterodyne_receiver#Image_frequency_(fIMAGE)
Пікірлер: 35