It should be noted that this is an assembly kit, although it has a remote control, it is not an RTF. The factory has not adjusted this helicopter, you must assemble it correctly and adjust the flight control, pitch, swash plate level, etc. correctly. Otherwise, you will lose control and crash. PS: Calibrating the compass is very important. You must cover the cabin door and let the USB cable come out of the gap to connect to the computer for calibration. Because there is a magnet in the cabin door, it is very important to allow the magnet to adsorb before calibrating the compass. Then you need to look at the methods mentioned in this post to verify if the calibration is correct.
If you receive this helicopter, do not click to install a new helicopter because you cannot accurately learn how to use H1 flight control for tail motor control. If you click to install a new helicopter, you are likely to never be able to successfully fly again unless you find a pilot with experience in setting up to help you.
When leaving the factory, I have already set the tail motor mode for you and set the correct movement direction of the swashplate servo. You only need to assemble and calibrate the compass correctly. Then carefully try flying. If you are using this product for the first time and do not understand the characteristics of H1 flight control, you may crash.
/ 1698488577219922
Негізгі бет AS350 RC scale helicopter Assembly Tutorial
Пікірлер: 1