In the following I will try to give an illustration of self-assembly of a 1600 gpd RO machine using 4 3013 400gpd membranes with 2 booster pumps.
considering the many friends who play the back lane (via Message Whatsapp) asking to be told how to assemble a large capacity RO undersink machine for their low-power electrical solution.
Indeed, not all areas have and at any time can have large electrical power so they have to choose what RO machine is suitable and in accordance with their electrical power, it's not that they can't add electrical power but indeed their electrical power is limited, like in island areas. or remote areas.
so I tried to choose an undersink RO machine with a large capacity but low power by applying the type 3013 undersink RO membrane with a capacity of 400 gpd or it could be 600 gpd.
using a booster pump with an open flow specification of 4LPM with a pressure of 130psi with a power supply voltage of 24Volt/2A might be a solution for their electrical power.
The power consumption for these 2 power supply adapters for 2 booster pumps is only 350 watts (1 adapter is only 175 watts) so I think it's the best solution for their limited electrical power,
For the problem of membrane capacity, I suggest that for stable production, they only need to install 4 400gpd membranes, although they can include 600gpd membranes. but it can make the booster pump heavy and can make the HPS Boosterpump line turn off electricity because it detects high pressure on the membrane.
The electricity from this machine I try to offer the R.O micro controller concept using ROC 2015, this micro controller is very good at regulating the RO engine electricity, inside it is equipped with sensors for LPS, HPS, Booster Pump, Jockey Pump, Radar Tank, selenoide valve water input selenoide auto flushing, so those who already understand the working mechanism of RO undersink or RO auto flushing machines can use the 2015 ROC micro controller so that the RO machine can work automatically, and can protect pump performance,
for those who don't understand using ROC 2015, and just want to use simple ro engine electricity, please be creative yourself because the undersink ro engine electricity is very simple because it works on DC current voltage,
So, because I don't use an auto flushing selenoide, I also provide the assembly using a manual flushing stopper that I have provided in each RO waste water discharge line for each membrane to keep the membrane clean by flushing the membrane for at least 1 minute / every time I want to turn it on or when it's been more than 1 hour working the root condition of the membrane is kept clean.
Негізгі бет Assemble your own RO machine 1600 gpd (4 membranes 3013 400gpd)
Пікірлер: 106