7 years later and your video is still the most useful one I’ve seen. The little hump piece was driving me crazy! Thank you!!!!
@raineandaya2904
10 ай бұрын
It’s 2023! thank you for saving my day!!!
@kdeshane
Жыл бұрын
I'm really late to the party here, but I ran into an issue with my G22 trigger last night and this video helped me so much with the disassembly and reassembly. Thank you!
@lizzyowls1017
Жыл бұрын
Just started using my airbrush today and thought I broke it within2 hours. You instructions were so awesome and helped me get my brush back together ❤❤❤
@lindap.5310
6 жыл бұрын
Thank you so much for this easy to follow directions. I like most of the others had that darn little needle guild fall out and couldn't figure out how to put it back. Your video is the first and last one I watched. All fixed thanks to you . Your the best!
@szlavich
5 жыл бұрын
You saved my sanity. I bought this airbrush because "beginner" and don't want to waste $ on something I suck at. My first rule for learning is I have to know how to take it apart and know all the parts before using anything. After watching another girl do this completely backwards I tried for hours to get the secondary lever guide in. Went back to your video and was done in minutes. Thank you so much. I now know this airbrush inside and out!
@keithlavergne8249
Жыл бұрын
I know this video is old but you helped me put the trigger back real easy. Thank you
@hughjoiner9816
2 жыл бұрын
Well… thank you so much!!! I’ve been racking my brain for days trying to figure this out and thought I’d really messed it up… Ur video was a HUGE HELP!!! Thank you!!! Thank you!!! Thank you!!!!
@joebochinski1693
4 жыл бұрын
Great video. Straight and to the point, explained well. Saved me a lot of anxiety as I tried to reassemble mine just now. Fun fact, it looks like on the newer models of the g22 (mine at least) they flange out two little bits for the needle guide so it stays attached.
@Riverrockphotos
2 жыл бұрын
Yes but that peace falls off all the time so not so much.
@sonoraweston6175
8 ай бұрын
Rescued me from the little hump piece 8 years later! Thanks!!
@a.garland5003
5 жыл бұрын
I really cannot thank you enough sir , I took my airbrush to bits for the first time . Thanks to you I can now do it , thanks again 🙂
@vickiekress9059
8 жыл бұрын
I CANNOT thank you enough. Tears of joy (since they're no longer tears of frustration).
@az-3dbob876
8 жыл бұрын
+Vixter K I am glad I was able to help you know your airbrush better I have a new channel at kzitem.info/rock/l1eChk2jEA5-ZBnAaMDVrA Watch this channel for new content Bob
@nativeSDgirl
Жыл бұрын
You are a lifesaver Bob! Thanks for making this video!!
@alanmtsinai
9 жыл бұрын
Thank you for explaining this so clearly. I was so frustrated trying to get the trigger back in place, I was ready to give up. After watching you do it I had no problem anymore.
@az-3dbob876
9 жыл бұрын
alanmtsinai Glad I was of help. Keep learning the airbrush.
@kirbymorris2253
Жыл бұрын
I was so happy a a video that didn’t assume I already knew how to assemble the air brush. Thank you on behalf of all us noobs who are ready to give up on ever using our airbrush
@eframang
10 ай бұрын
God bless you...i just bought this and disassembled it by accident while trying to clean it....your video saved me from throwing this out the window....Thank you!
@jennrosefair
4 жыл бұрын
I haven't been able to put this back together forever! Thank you so very much! It was quick and easy with your help!
@estelaisabella7075
2 жыл бұрын
I’m super happy I found your video!!! Thank you 🙏
@Elaineelation
Жыл бұрын
Thankyou so much i had an entire breakdown last night because I needed to finish my first order and I was running out of time. Nobody explained it like you.
@maryblakeman3703
7 жыл бұрын
BOB!! Thank you for your clear, concise and calm description! You are the BEST!!
@bigbama34
2 ай бұрын
Thank You. This helped me tremendously. I was not cleaning mine very good and it quit. It's up and running now.
@juneronneberg2092
9 жыл бұрын
I appreciate this video -- as mine came apart after cleaning and I could not figure out how to get the lever guide back into place!
@kapillraj27
3 жыл бұрын
Air brush theory kzitem.info/news/bejne/wIWw3YuNjJdyooo
@warc8us
3 жыл бұрын
I just tried to clean my Master G23 in an ultrasonic cleaner, and it just ended up vibrating all this stuff loose - I couldn't get the needle to pass through and the trigger pull was rough. Ended up taking the entire thing apart, put the pieces in a bin and decided to tackle it tomorrow. Thanks to this video, I'll know what I need to do tomorrow morning! Thank you!
@shannonestlund
9 жыл бұрын
Thank you so much for this! Took mine apart because of a clog and was so stuck as to how to get it back together again. This video was a perfect solution!!!!
@OnnaMishun
9 жыл бұрын
AWESOME! I am so glad to see someone finally explain the assembly without talking about everything in between. THANK YOU!
@everydaygourmetmichellelyn1532
8 жыл бұрын
Thank you so much. That itty bitty piece fell out into the sink when I washed it out and I wondered what the heck to do with it since the directions didn't specify how to get it back in there. UGH!!! THANK YOU- THANK YOU -THANK YOU. Your video was clear and concise.
@flatlandfox
Жыл бұрын
Thank You Bob, & AZ-3D... Ive watched several vids on assembly... & yours truly is the best, most concise, and easiest to follow!!
@ZombieCupcake623
2 жыл бұрын
Thank you! This was super easy to follow. 👍
@fatboyike7347
4 жыл бұрын
Excellent video, very helpful. Thanks for posting this.
@SvetlanaKoscova
5 жыл бұрын
3min in and u saved me. Thanks so much🙌
@joshstreet6819
3 жыл бұрын
Thanks this video helped out a lot putting my G22 back together.
@februarykitchen3571
3 жыл бұрын
i can't thank you enough. you just helped me save this airgun, as i obviously didn't know how to assemble it and i might have had to purchase a new one. THANK YOU SO MUCH. AMAZING VIDEO.
@crazymoogle
5 жыл бұрын
Thank you! Your video is the first to help me troubleshoot my misassembly!
@NESSHEAD68
4 жыл бұрын
Thank you!!! That trigger and needle guide was killing me.
@thedungeondelver
3 жыл бұрын
I know this is an old video, but I have to thank you SO MUCH. That trigger mech and needle guide assembly was giving me fits trying to put it back together! Thanks so much!!!
@rudyalvarado4478
4 жыл бұрын
I can’t tell you how long I’ve been trying to figure this out thank you so much. I’m new to airbrushing so thank you
@rudyalvarado4478
4 жыл бұрын
A whole 5 years later and you still saving lives. You are the real MVP 😂
@coryhw5768
5 жыл бұрын
Bob you are a lifesaver thank you so so much
@mtpadp
6 жыл бұрын
Finally. Some one explains. It. In a very simple way thank you sir, this will help a lot of people
@tmmaggi
6 жыл бұрын
So glad you made this video. Clear, step by step instructions!! Thank you!!!
@bencreateddisco
3 жыл бұрын
thanks for the breakdown, this was really helpful!
@CJ-jh9ri
3 жыл бұрын
Had to go to KZitem just so I could comment and say thanks for the guide. It really helped!
@jf6720
4 жыл бұрын
Thank you! Just what I was looking for.
@chosenone254
6 жыл бұрын
Omg thank you very much . I have been trying to reassemble my air brush over a week now. I just did it .thanks again
@seriaz3933
3 жыл бұрын
A thousand thanks skilled sir.
@TheWoodWerker
8 жыл бұрын
Great Video! I just got my Master G23 Airbrush & I had zero trouble following along. You are a Fantastic Teacher! Thumbs up!... Now....,let's see if this thing sprays!..(Kidding) Have A Super Week!..... Gus
@dragonalchemy6802
6 жыл бұрын
Its been a long time since I've been in my airbrush course, great refresher thank you so much!
@Newman4185
8 жыл бұрын
Thank you so much. I was afraid I wouldnt be able to get it back together but this helped tremendously. Thank you!
@lillianmitchell8063
8 жыл бұрын
Thank you so so very much! I've been enamored with that little lever guide. Thank you again.
@az-3dbob876
8 жыл бұрын
+Lillie Mitchell I am glad I was able to help you with this. I enjoyed making this video.
@Colorfultography
6 жыл бұрын
Bless your heart i was afraid id never figure out how to put that dang tiny peice back in
@drummerboyz55
5 жыл бұрын
I was having issues with no air coming out. Glad you made the video dude
@Auron0555
8 жыл бұрын
Tyvm, my airbrush was in pieces for weeks because I couldn't figure out how to attach that little metal flap. Back to painting!
@chopdoc11
6 жыл бұрын
Excellent video. Thanks!
@patrickcanter2831
6 жыл бұрын
Thanks for explaining which way the little needle flap goes in. I never knew. :)
@Wallyskat
6 жыл бұрын
Excellent! Just what I needed, That little trigger part...
@jwilltanker37
7 жыл бұрын
Excellent video. I learn something new every day
@cornelious2
4 жыл бұрын
Thank you for this it saved me probably hours of pain with my g-25 airbrush, the only difference for that one is the needle guide is part of the shaft so I think they improved that piece in this version.
@DarrenWulfen
9 ай бұрын
Thank you for your continued help!
@timmcdraw7568
29 күн бұрын
Life saver. Thank you!
@jasonbossardt9453
7 жыл бұрын
Very Helpful! Thank you! I was changing the needle, and the darn trigger fell out. I have the G23 model, but the trigger and needle assembly are basically the same, so this helped me figure it out. Thanks again!
@jamessmith1997-v5c
Жыл бұрын
Thanks dude! Realy helpful video
@phillipefentress7114
3 жыл бұрын
That was very helpful.Thank alot
@jacobg9366
5 жыл бұрын
Thank you! Thank you! Thaaaaaaank you! This was super helpful. That small humped part was giving me fits before I saw this video.
@Redslayer0908
Жыл бұрын
Thanks man, the trigger was giving me a hard time.
@Gundarium_gabe
3 жыл бұрын
Thanks bob keep up the good work and Gunpla is freedom
@MrJoeGarner
5 жыл бұрын
Thanks so much for doing this, I've been using badger quality airbrushes and this was totally out of my realm of understanding. GAH! What will I ever do? I may have to watch your video every time I do this but it's worth it to save the frustration. Kudos to you my friend.
@viwrench7679
7 жыл бұрын
Life saver great video
@sdavistay1
5 жыл бұрын
Thank you, the trigger and guide were about to drive me crazy. I wasw just before tossing it in the waste basket.
@Nomadcreations
4 жыл бұрын
Thanx Bob Takes The Apprehension Out For Dissasembling One, All Pieces logically Together but still beginners Fears. 3 New airbrushes For me today & None Picks Up the paint good enough I had Hoped a Cleaning section to This Vid but it was good None the less...
@robertiko4631
8 жыл бұрын
I've found your video very helpful. Many thanks.
@irisgarcia1708
6 жыл бұрын
Thank you so much for your time and help .
@ddragonrrr
8 жыл бұрын
thanks man, I finally did it as I was confused how to get that damn tiny bit in there!! thanks from Malta
@curva29
9 жыл бұрын
OMG....I love you....it was so clear your explanation that I did at the first try.....Thank you 😉
@HughTexJudd
3 жыл бұрын
Thank's so much, Bob!
@MrPncarbo
7 жыл бұрын
Thanks for making this. Its very helpful!
@GummieLindsays
5 жыл бұрын
Perfect guide!!! Thank you so much!!! I was scared that I couldn't put it back together after I took it apart. Now my trigger slides with ease again!
@davidpowers3056
7 жыл бұрын
Thank you for this tutorial. Great help today Thank you again. Very helpful.
@huntergottlieb3943
4 ай бұрын
Lifesaver. Thank you!
@mikefishhead
Жыл бұрын
Thanks very easy tutorial 👍
@marialauraalfarojimenez4802
6 жыл бұрын
you saved me, thank you!! excellent explanation.
@greywanderer5935
7 жыл бұрын
Thank you so much for this! Helped me out a lot!
@danrussell3439
5 жыл бұрын
This was so helpful. Thank you
@Lanikaigirl42
6 жыл бұрын
Thank you so much! It was driving me nuts!
@rogerpence
7 жыл бұрын
Thank you very much for this! It really helped me out.
@victorarcos6178
Жыл бұрын
One of the best vids I’ve seen so far, to the point, not over explained. Thanks to you my airbrush is working just fine again. What’s your take on cleaning the parts with vinegar?
@lashea1974
5 жыл бұрын
Best How To !! Thank you!!
@artcaesar3974
7 жыл бұрын
Awesome video Thank you so much! You have no idea how long it took me ..lol Thanks Again
@MichaelGreen-dm2ov
8 жыл бұрын
Thanks for posting this sir!!!!!!!!!!!!
@GingerHoliday
2 ай бұрын
Thank you, I don’t know why that little piece can just come out, I thought I broke the damn thing!
@jaredg9734
6 жыл бұрын
Your a life saver 😥
@bestspokedope6467
9 жыл бұрын
Thanks helped a lot
@taogeht666
2 жыл бұрын
thank u so much been f$%&in around with a cheapo airbrush thinking it needed replacing but turns out the chuck was just loose
@GeneralKetchup57
7 жыл бұрын
Thank You! You are a lifesaver:)
@GhostBearCommander
Жыл бұрын
Thank you, M'Dude!
@parkitna1
8 жыл бұрын
Thx. It was very helpful. :)
@janhaliski9297
7 ай бұрын
Excellent. But I would like to know why the needle needs to be pulled back "a little bit".
@SUPERFUTUREKlD
8 жыл бұрын
Thank you, very helpful!
@peterelgie3529
7 жыл бұрын
lifesaver!! thanks :)
@sandyjenkins4017
7 жыл бұрын
very helpful, thank you!
@erikgipson9890
4 жыл бұрын
Thank you Sir!
@RyanClarky
2 жыл бұрын
I JUST used my airbrush (the g22) for the first time tonight. This guide is excellent and answered my question about seating the needle. After I load paint (in this case Steinalrez Black) the paint seems to drizzle out of the front AND just pushing the trigger down doesn't only allow air, paint always comes out. I did make sure to use the .5 kit that came with it per the primer's directions. Any advice?
Пікірлер: 161