My apologies for the GoPro 10 debacle. I hope all of you celebrating Christmas have an awesome one! Thanks for your continual support.
@DeterminedVeteran
2 жыл бұрын
Man I’ve had hell with GoPros hence why I switched to a blogging set up love my cannon
@GearHead704
2 жыл бұрын
@@DeterminedVeteran This was the first time I had an issue, but that wasn't fun.
@DeterminedVeteran
2 жыл бұрын
@@GearHead704 well at least you did break your SD card lol
@GearHead704
2 жыл бұрын
@@DeterminedVeteran Hahha, ah the memories! 😅
@MrBlackbutang
2 жыл бұрын
Thanks for your determination!
@GearHead704
2 жыл бұрын
Thanks, gotta see it finished.
@jennymann3704
2 жыл бұрын
He'll yeah Matt thanks for your content God bless
@GearHead704
2 жыл бұрын
Glad you like it and thanks!
@irshred
2 жыл бұрын
Awesome , can’t wait sit to hear it
@GearHead704
2 жыл бұрын
Thanks me too.
@BigJay916
Жыл бұрын
Excellent job y'all. Straight motivating! 🔥 💯 🎉
@thefoxchamber
2 жыл бұрын
This is pretty cool 😎
@GearHead704
2 жыл бұрын
Yeah I'm excited, thanks Jim.
@boosted9319
2 жыл бұрын
That’s going to be a bad motor. Like the tag along on the build. Keep it up brother🔥
@GearHead704
2 жыл бұрын
Thanks buddy, it should do good for a SBF NA build
@boosted9319
2 жыл бұрын
@@GearHead704 💪🏼💪🏼
@robertbruneau112
Жыл бұрын
Seeing the next video already, 210 cylinder pressure, would indicate pretty high dynamic compression ratio. 93 octane may not be sufficient. Curious what Adam would say. Very nice build
@GearHead704
7 ай бұрын
Interesting,. I guess if I ever get it in the car and up on the dyno we'll find out if I've got high enough octane or not to be safe. Thanks for bringing this point up.
@SN95Power
2 жыл бұрын
My iPhone 12 pro max is starting to do the same thing. Will probably upgrade to mirrorless soon. That motor is going to scream. Can't beat the sound of a cammed sbf.
@GearHead704
2 жыл бұрын
Oh man, I hope you are able to get that worked out, as I know how frustrating it can be. 100% agreed on the sound buddy
@cyclonekevin6199
2 жыл бұрын
I actually forgot, bout the engine build. It’s been awhile.
@GearHead704
2 жыл бұрын
LOL, yes it has hah hah. Thanks for watching Kevin.
@fordtechlife
2 жыл бұрын
NICE those looked like some wiseco forged pistons ? 💪🔧🚗🐎🇺🇲💯👊 happy holidays Matt hope all is well 🙏🇺🇲💯
@GearHead704
2 жыл бұрын
Thanks FT! I hope you had some great holidays already and more to come.
@fordtechlife
2 жыл бұрын
@@GearHead704 curious what pistons those were I think your memory card issue might me the speed of the card for gopro 10 they say 30mb or higher, I try to alway use Scan Disk but you prob know this already 🤣👍 Sometimes certain cards just start acting weird is just time to throw them away 💪🇺🇲💯
@GearHead704
2 жыл бұрын
@@fordtechlife Oh those were DSS Pistons I believe. Yeah I used a SAN disk but IDK what happened
@C.R.T.mountainhomestead
2 жыл бұрын
Most strokers I’ve heard about were 347. You have said 349 in this video and one of the showcase videos. What’s different? Merry Christmas Matt!
@GearHead704
2 жыл бұрын
Thanks Carl I had a great one and hope you did too! This one had to be bored 40 over instead of 30 adding 2 more cubic inches.
@RaymondUrias
2 жыл бұрын
THIS is actually an amazing video. Exact reason why you are the best Foxbody guy.
@GearHead704
2 жыл бұрын
You are too kind, thank you so much!
@Streetfox5.0
2 жыл бұрын
That's so Awesome Matt!! I'm so glad you got the 190 11r heads. That engine is gonna scream. Very nice build Sir.
@GearHead704
2 жыл бұрын
Thanks I'm really excited about it.
@DeterminedVeteran
2 жыл бұрын
It’s really coming together !
@GearHead704
2 жыл бұрын
We getting there!
@stefanjorgenson2672
Жыл бұрын
Adam is my hero. I hope my local engine shops build like he does.
@GearHead704
5 ай бұрын
He's the man.
@bluesharp59
2 жыл бұрын
Thumbs Up and Merry Christmas to you and your fans.
@GearHead704
2 жыл бұрын
Thanks and Merry Christmas to you!
@bluesharp59
2 жыл бұрын
@@GearHead704 You are welcome also.
@mji387
2 жыл бұрын
That’s awesome you were able to take part in assembling your motor. Nice combination… gonna be lots of fun 👍🏻
@GearHead704
2 жыл бұрын
Yeah it was, and I think so too! Thanks Mike.
@TheInfamousProject
2 жыл бұрын
Glad to see you managed to save your footage man!
@GearHead704
2 жыл бұрын
Yeah this was going to be hard to reshoot lol
@rickfox9825
2 жыл бұрын
Good thing Adam knows stuff inside and out or it could be intimating having Matt the "Fox Doc" critiquing your engine building skills and techniques while looking over your shoulder! I'd be a nervous wreck!!! LOL
@GearHead704
2 жыл бұрын
Hah hah, yeah I was a bit of a nervous wreck lol
@corneleousworthington4566
2 жыл бұрын
Hey thanks for sharing this vid! What kinda block paint did you use?
@GearHead704
2 жыл бұрын
Sure, I forgot to ask Adam what he used, he painted it before I got there.
@carmob7499
2 жыл бұрын
I love it a new Foxbody engine !! Can't wait to hear her come to life .. Great job Matt ..
@GearHead704
2 жыл бұрын
Thanks James, we getting there.
@Resistculturaldecline
Жыл бұрын
Finally, someone that puts the cam in before the crank.
@GearHead704
Жыл бұрын
It was cool to see Adam do that.
@robertc1220
2 жыл бұрын
Merry Christmas to all at Gearhead704. Still enjoying your how to videos.
@GearHead704
2 жыл бұрын
Had a great one Robert. I hope you did too. Thanks man.
@danvolker13
2 жыл бұрын
That’s really cool that you got to be involved in assembling the engine..now hurry up with that car can’t wait to see it finished🍻
@GearHead704
2 жыл бұрын
Yes, it is and I know I need to get moving lol
@gr8tfoxes617
2 жыл бұрын
Great build coverage Matt and glad to see you moving forward on your project. Looking forward to see more. Happy Holidays to you, Tiff, and the kids!
@GearHead704
2 жыл бұрын
Hey buddy! Hope you enjoyed your holidays so far and the ones still to come.
@jpat99
2 жыл бұрын
Very cool vid and that man is very detailed and definitely a guy that can build an engine.
@GearHead704
2 жыл бұрын
Thanks and I really think so.
@mikeconnelly7032
2 жыл бұрын
Matt!!! It was like watching cable tv in the 80’s during a storm!! Lol Glad to see some progress!!
@GearHead704
2 жыл бұрын
🤣 You are so right! That really made me laugh. Thanks for watching Mike.
@timwindsor03
2 жыл бұрын
Awesome video MATT. Glad to see your engine coming together and you actually helping put it together. Thanks for sharing. Keep the content coming. Hope you have an incredible night. Much love and RESPECT. Merry Christmas to you and your family
@GearHead704
2 жыл бұрын
Thanks Tim and I hope you had a great Christmas
@JayC-nr1mp
2 жыл бұрын
I hope you n your family have a great Christmas as well champ keep grinding
@GearHead704
2 жыл бұрын
Thanks, you too!
@BrotherTom
2 жыл бұрын
Excited for you, Matt! Can't wait to see the next video on this one!
@GearHead704
2 жыл бұрын
Thanks Tom and it drops today!
@rogerwatson5995
10 ай бұрын
347s are Ok as long as you dont go above 7.500 as i broke 2 of them in half at those Rpm thats when i went 351w boared out to 427 and they dont break in half they just Give Mega Power and worth it Majorly
@GearHead704
10 ай бұрын
I think I'll only be revving to about 6,000
@rogerwatson5995
10 ай бұрын
From one Ford man to you Only the Best wished to you and yours this Holidays commin up Soon as im 55 and still play like im 25 and Enjoy clean up on those Coyote Fords with my 427 at the track as Often as I can in a 94 Mustang GT
@jameyrichardson8967
2 жыл бұрын
Congrats Matt great to see the engine going together and you being able to get your hands in on it putting a motor together is not that hard just have to take your time and keep everything clean
@GearHead704
2 жыл бұрын
You're right, Fingers crossed! Thanks.
@darylfitzgerald1327
2 жыл бұрын
I so pumped for you Matt and the new engine. I'm glad the video is short. I'm supposed to packing for my flight , of course I have to watch the video first. So I told my wife I will be ready 13 minutes later then I expected too
@GearHead704
2 жыл бұрын
LOL, Daryl I hope you didn't miss your flight, but thanks so much for making my video a priority LOL
@darylfitzgerald1327
2 жыл бұрын
@@GearHead704 👍🇺🇸
@TheSeanGTV
2 жыл бұрын
No problem there man!!! Didn’t notice much!! All good!! Nemesis on the way!
@GearHead704
2 жыл бұрын
Appreciate it Sean and yeah it's getting there!
@oldfoxer1648
2 жыл бұрын
For me it's nice to look at little flawed fox bodies but I much more enjoy seeing bolts getting wrenched. It's just what turns my crank I guess. Waiting on part 2.
@GearHead704
2 жыл бұрын
😁. you crack me up sir! Part two dropping later today.
@jpp9846
2 жыл бұрын
Nice education you're getting there Matt, even if you didn't do it all, being familiar with the process and more importantly, having a hand in on the build, is invaluable. Great video, can't wait to hear it start. Have a Merry Christmas 👍
@GearHead704
2 жыл бұрын
Had a great Christmas and hope you did too buddy! Yeah it was fun to learn, play a part, and document it.
@S.Matt240
2 жыл бұрын
I must be getting old because looking at that motor is just as satisfying as finding a playboy back when I was 10 years old that I promptly hid in the woods near my house
@GearHead704
2 жыл бұрын
🤣. It is very satisfying to see
@The50Baker
11 ай бұрын
What did you do the get the thrust from .003 to .005? I have .003 end play in my 347 stroker.
@GearHead704
8 ай бұрын
I believe I responded over e-mail, sorry I couldn't be of more help.
@juantabby4787
2 жыл бұрын
Ok so I’ve been watching for a bit, since I got the urge for a foxbody. Finally got a barn find and wouldn’t you know, it’s an 84 gt just under 118k 5 spd. black on black with a sunroof and premium sound. The dashboard is in beautiful shape. Been parked since 99 I heard. I’m having to hold the key after it cranks to life just in between the crank and normal running position. Tried a brand new key cylinder, it didn’t help. Any ideas?
@GearHead704
2 жыл бұрын
Sorry haven't run into that one before, but congrats on the 84!
@juantabby4787
2 жыл бұрын
@@GearHead704 thanks, its been a long time looking and hundreds of miles searching to find one not all clapped out. It’s now running without holding the key being held but there’s a dead spot so I have to click the key back a hair. I seen your video on the zip tie fix but my harness is tight. Is it possible the little spring is worn? Not sure what the parts called but it is lower on the steering column.
@carlosdejesus816
2 жыл бұрын
I love your shirt at the opening, that's a classic relic now 😉
@GearHead704
2 жыл бұрын
LOL, Indeed it is!
@paulhudgins5120
2 жыл бұрын
Good looking motor Matt, really good to have your hands on the motor assembly, no problems on the GoPro, hope you and your family has a great Christmas!!
@GearHead704
2 жыл бұрын
We had a great one Paul and I hope you did too! Yes, very cool for me to get to experience that.
@juicemcelveen3845
6 ай бұрын
What stroker kit is this ?
@GearHead704
6 ай бұрын
I think we talk about that in the next video, I forgot the brand name
@jimmywarledo4930
2 жыл бұрын
What was the total cost of the short block?
@GearHead704
2 жыл бұрын
I bought the heads and cam separately, but I think all the new internals plus the machining work would run about $3,800
@tonyoliver2334
2 жыл бұрын
Nemesis is going to be sick man!
@GearHead704
2 жыл бұрын
Yeah I'm really excited about it.
@frank3stangs
2 жыл бұрын
Nice video! Same heads I have on my green and orange mustangs!
@GearHead704
2 жыл бұрын
Yeah I remember you saying you liked them Frank.
@spassmore8483
2 жыл бұрын
Matt its great to see you having your hands in your engine build from the block up it's going to be a great feeling once you fire it up and it should sound pretty choppy with that cam in there and make good power. you've got a pretty nice setup there, can't wait to see what intake you go with! Happy Holidays & Merry Christmas to you and the family hope you have a great x-mas 🎄 ☃️
@GearHead704
2 жыл бұрын
Thank you, had an awesome Christmas and hope you did too! Yeah man I can not WAIT for that first fire
@vrm86gt
2 жыл бұрын
that 349 combo should be well matched components and run hard!
@GearHead704
2 жыл бұрын
Yes I think so !
@JayC-nr1mp
2 жыл бұрын
Im here like always champ 👊🏾
@GearHead704
2 жыл бұрын
and here early! thanks Jay C
@juliaicecreamtruck5171
2 жыл бұрын
How much does it cost to rebuild your motor
@GearHead704
2 жыл бұрын
I bought the heads and cam on my on. I think everything else would run like $3,800
@moneypitmustangbrian3934
2 жыл бұрын
Glad to see your engine coming together. Are you still building the coupe for auto cross?
@GearHead704
2 жыл бұрын
Thanks and yes I am.
@KJsProjects
2 жыл бұрын
Any idea how much this combo will make (depending on intake)?
@GearHead704
2 жыл бұрын
I'm really not sure, but will have it dyno tuned once it's in the car.
@tedjones450
2 жыл бұрын
Not a real stable work surface for assembling an engine.
@GearHead704
2 жыл бұрын
I thought so too at first, but turns out its way more stable than it looks and Adam says he uses it all the time and its solid, so that's good enough for me.
Пікірлер: 117