i dont ever comment on videos but if there was one video on youtube i could say has genuinely helped me understand all of this it would be this one so thank you
@Yummiyomi
3 ай бұрын
I second that. Im learning now
@jafarolayiwolaabdulwaheed6208
Жыл бұрын
I've never found a video that's more comprehensive and simple like this one
@444_Ω7
3 ай бұрын
This is the *FIRST* TIME I've listened to a tutorial, applied what it told me to do without a hitch and it worked.
@444_Ω7
3 ай бұрын
almost forgot to mention that I'm french, and that I understood your instructions much better than all my previous french tutorials
@AWOL775
5 ай бұрын
This video is amazing! It is easy to follow. The narrator speaks slowly and enunciates the directions. Thank YOU so much for making this concise and truly helpful video.
@incrementum221
10 ай бұрын
The tip from switching to TRS connectors just cleaned up my sound. Thank you so much!
@nicksmith8557
10 ай бұрын
Another excellent, clear and fast based lesson. Thank you for sharing.
@thingsthatmakemego-ooh
Жыл бұрын
This is the video I was looking for. Thank you so much 🙏 detailed step by step instructions because I am starting from no knowledge at all. Appreciated greatly 🙏
@AudioUniversity
Жыл бұрын
Glad to help!
@DeBora4Bobby
2 ай бұрын
Thank you for making these videos so easy to understand for those of us who are new to this and are just now learning and do not know the lingo! You are my favorite educator in this area.
@hamzazoudah7040
Жыл бұрын
This is the most helpful 7 minutes video I've ever seen ❤
@AudioUniversity
Жыл бұрын
Glad to help!
@euricguerrero
3 ай бұрын
dude your explanation was so clear without extraneous noise (pun intended). thank you.
@OneCr8er
9 ай бұрын
I know my equipment I searched for a vid so someone would understand. This was 100% direct simple and correct. Took over an hour and finally lol. Thanks for your video I saved it and I never do that.
@DobosSArpad
7 ай бұрын
Excellent. Very clear. Concise. Images conveyed useful information. Appreciate it!
@FightStrong
Жыл бұрын
This video is brilliantly clear and simple.
@Dr.DivaMa
5 ай бұрын
This video has simplified my life. Thank you so much, it was so clear as the sunlight!
@michaeltoombs4590
3 ай бұрын
This video was incredibly helpful. It showed me the difference between TS and TRS cables, solving my feedback issues
@diab9lic756
Жыл бұрын
Gosh darn, I searched high and low and every video sucks except this one. Thanks man!!!
@Shimrakha
10 ай бұрын
Audio University is right! My guy is a professor! Thank You!
@TheUberSchattenjager
3 жыл бұрын
Also - would LOVE to see you do a 'getting started with Reaper' as the web is full of older videos and the software has changed. but most importantly, you do such a killer job of explaining things, i think even a dummy like me could get to work with Reaper right away with your guidance. But we all have 'easy ideas' for other people to do, eh? ;)
@AudioUniversity
3 жыл бұрын
That’s a great idea! The only thing that has kept me from doing it already is the vastness of what can be done in Reaper. What would you like to see demonstrated in a “getting started” video?
@TheUberSchattenjager
3 жыл бұрын
@@AudioUniversity Booth Junkie has an interesting (but old) instruction format you might check out on Reaper
@AudioUniversity
3 жыл бұрын
Yes. You can use one speaker, but you’ll probably want headphones for recording so that the backing track isn’t recorded by the vocal microphone.
@AudioUniversity
3 жыл бұрын
Yes. An interface, a Computer, a mic, and a pair of headphones is all you need!
@anitanirmal27
3 жыл бұрын
True!
@plasmamig
Жыл бұрын
This video is by far the best I’ve seen Thankyou💯💯
@bzarone8063
4 ай бұрын
you deserve your flowers bro and i watched all kinds of videos i downloaded the file of the website and it popped up i appreciate you
@ronfeggio
Жыл бұрын
Excellent! Clear, concise and exactly what I needed. Subscribed
@magicmoonmedicine
7 ай бұрын
Thank you for being so clear for beginners.
@AudioUniversity
7 ай бұрын
Glad to help!
@JellyGlows
7 ай бұрын
@@AudioUniversitywith my solo it’s letting me hear game audio but no one in discord. My mic is working for them. I have it set as my input n output. I’ve set reaper up. I’m not sure what’s going on
@VivekTheMesmerizer
Жыл бұрын
This is the best channel for healthy info of audio tech. Thanks a ton for the valuable stuff 😊
@Daniel-wu3vk
7 ай бұрын
Amazing video❤❤ i only have one doubt.. is it possible to get output to external speakers without a audio interface from midi keyboard (I don't want a microphone)
@johnsonolalekan7853
5 ай бұрын
It's that voice for me ❤😂thank you for the clear review ❤
@user-qr7ee2cp4y
5 ай бұрын
Great info! Going to get an Interface but wasn't 100% sure I could use it for all audio output.
@jhfraser6
7 ай бұрын
I am requesting some guidance and hope I am taken the right route. This setup is for a small church to stream to KZitem. We have a 16-channel analog sound board. My plan is to use the Focusrite Solo 4th generation to be the interface between the soundboard and a Win10 laptop using OBS. I am hopeful I can get some feedback on my plan. Your video is superb. You are masterful at explaining and providing the detail and explanation that so many others miss.
@Whitepbass21
8 ай бұрын
Very informative! Thank you so much!
@tonydialsr7190
5 ай бұрын
Thanks so much for your instruction. I was totally afraid I might do something wrong.
@Psilocybvin
4 ай бұрын
Dudeeeee, thank you so much on 3:45, I thought my mic was broken and was getting so frustrated
@bestboy897
9 ай бұрын
no bs straight to the point thanks
@marklockhart7555
8 ай бұрын
Thank you so much, your video really helped me out. Love from the UK
@AudioUniversity
8 ай бұрын
Glad to help!
@Rajeshkalambe
Жыл бұрын
this is what i was searching on KZitem..thanks buddy ..keep it upp....
@ezemicheal7842
5 ай бұрын
Is there a way to like one video multiple times ❤❤❤❤
@rusticrichmusic
2 ай бұрын
Excellent video! Most informative video yet.
@richardlu6706
10 ай бұрын
This video is super well-put together, but I'm wondering - do interfaces not usually have some way to output audio directly through the computer speakers when the DAW is open, i.e. are headphones/speakers necessary? I've been struggling for several hours with hearing my guitar through my computer speakers, and I wasn't sure if I literally can't do that, and I need to have headphones/speakers to plug in using the 1/4 inch or RCA cables or whatever
@GunDrummer
Жыл бұрын
Thanks for the info dude
@salsapicante7408
2 жыл бұрын
Amazingly well explained video- thank you!
@derrickoliver3835
5 ай бұрын
Thanks 🙏 a million you’re dope!! Nice and simple and easy to understand with me having no previous experience with any of it but want to get started. I have maschine drum machine and software and Reasons it’s ten years old but I was told it doesn’t matter to still use.
@internetdose3120
6 ай бұрын
I don’t have these, but I can say these steps are a complication..he explains well even I don’t understand things.
@obivee186
4 ай бұрын
i finally understand now, all the other explanations were terrible, i can finally use the one thats been sitting on my desk doing nothing
@Jinatucat
6 күн бұрын
Thank you so much for this video, It really helped me.
@sl5311
9 ай бұрын
What brought me here was to make sure my laptop worked with my 2i2 and my Presonus 5.25 monitors without low level hum from EMF or RF. If I understand you and others correctly, it is unbalanced cables that cause this? Thank you great video
@vansh3235
11 ай бұрын
Should i power it from my pc? I'm scared it'll short my computer powersupply
@williamsyanes5774
9 ай бұрын
Excellent content bro, a new subscriber!
@rubymontoya6715
8 ай бұрын
This was so helpful! Thank you!!! ❤
@Sunflowers-cj1xt
7 ай бұрын
Wait wait so I can't use my USB headset if I get this set up for my mic? Or can I still just plug in my headset to my pc? I'm only doing this for better mic quality in my videos
@nikolaj550
Ай бұрын
Hello this video helpede me out so much and i gave it a👍 But if my Yamaha hs8 speakers only have XLR inputs Can i just plug it in to the xlr outputs?
@TheGrizz49
5 ай бұрын
I could really use some help trying to complete my problem. I’m trying to equalize my audio for gaming. I have focusrite solo and an older focusrite 6i6. Rode nt1a mic and studio headphones. I have a MacBook and windows laptop. Playing with Xbox i plan on using 3.5mm controller output to split mic and game audio. What software would you use to adjust audio? (Hopefully free. lol) and I’m just assuming i would have to be able to keep mic and game audio separate? Thanks in advance
@TheGrizz49
5 ай бұрын
Also, kudos on the video. This was still very helpful in understanding.
@mahi15896
3 жыл бұрын
Hey Kyle.Its great! Can you explain about different types of microphones and its properties and uses? Looking forward...
@AudioUniversity
3 жыл бұрын
audiouniversityonline.com/types-of-microphones/
@mahi15896
3 жыл бұрын
@@AudioUniversity Thanks Kyle
@sirwhistler
3 ай бұрын
Best damn video yet. Thank you.
@MRH4U5
Жыл бұрын
If I have an audio interface with a single 1/4 input. Can I connect a Synth with separate 1/4 left/right line level outputs if I use a cable with separate 1/4 left/right TS ends and 1 x 1/4 TRS end?
@denissahin1080
Жыл бұрын
Hello can I ask I have bluetooth headphones is there any issues that can appear?
@TheUberSchattenjager
3 жыл бұрын
my gear is coming today! much-apprecated info!
@AudioUniversity
3 жыл бұрын
That’s exciting! What gear is on its way?
@TheUberSchattenjager
3 жыл бұрын
@@AudioUniversity Focusrite 2i2, Stellar XT and Synco Mic-D2(will keep one) plus cables and mic arm! The whole kit and kaboodle
@AudioUniversity
3 жыл бұрын
Nice! That’s a great setup!
@snooopybrown2
2 жыл бұрын
this video helped me a lot with everything thanks!😁
@dzeronut_boy
3 жыл бұрын
Great video Audio University! One question, did you have to download ASIO in order to get clear sound out of the audio interface? When using MME Direct, I noticed the audio (guitar recording) was distorted badly. Only after downloading ASIO was I able to get clear audio out of the interface.
@philiptong4978
3 жыл бұрын
input level can be adjusted by Windows mixer (or recording device) when using MME to avoid clipping (overloading) ASIO has the advantage of bypassing Windows sampling rate conversion (fixed to PCM 16bit/48kHz)
@dzeronut_boy
3 жыл бұрын
@@philiptong4978 Ahhh alrightt, thanks for the information, Philip
@AudioUniversity
3 жыл бұрын
Thanks, Philip!
@HonorV2ultimate1tb
6 ай бұрын
great presentation.... but only up to the speakers connect part..... so where does the Arturia keylab mk2 connect to?.... it wud hav been a complete picture for the dumb beginner like me.... i still dont know.... my guess is from the mk2 usb C....connect to the laptop's 2nd usbA port..... ?
@kouchkastar9818
7 ай бұрын
perfect explaining ever ♥
@howardnphyllis
3 жыл бұрын
I was able to get sound from my PreSonus AudioboxUSB 96 to headphones, THANK YOU!! Does this work in Ableton also and how would i connect my interface to my Yamaha MG10XU to my PC to record vocals and instruments? Appreciate the great tutorial , yours was the only one I was able to follow and actually work with headphones...!! Now i need to "funnel" my mics>mixer>RC-1 loop pedal> to DAW to PC speakers. The settings in Ableton to make this happen are a little confusing due to my lack of experience. I wouldn't be opposed to a video call...?
@Spendo
9 ай бұрын
QUESTION: with an audio interface, can I listen to the music I’m making if I plug my headphones into the headphone monitoring area of the interface? Or will I only hear the microphone that’s plugged into it?
@teriqphillips2
3 жыл бұрын
The GOAT
@tarcisiaemanuela7540
Жыл бұрын
This video is amazing thank you for you help 😊
@AudioUniversity
Жыл бұрын
Glad it was helpful!
@AwaaraMusaafir
Жыл бұрын
I am using an audio interface with two mics for my podcast. Can someone please help me with a query? I want to record two seperate audio files for both the mics, how can I do that?
@AudioUniversity
Жыл бұрын
Check out this video: kzitem.info/news/bejne/rImp3Gtqml94eHY
@AwaaraMusaafir
Жыл бұрын
@@AudioUniversity Thanks a lot!
@SiLentAssassin10
9 ай бұрын
If I hook the speakers to the audio interface, would I need to hookup the power cable on the speakers as well or am I getting power from the audio interface? Thanks
@AudioUniversity
9 ай бұрын
You’ll need to use active monitors or place an amplifier in between the interface and passive speakers.
@lbiggy
2 ай бұрын
Would there be issues connecting headphones and monitors to the same focusrite?
@VyacheKan
13 күн бұрын
Hi, do you know of a PCIe card with USB-C support that can support DAC/AMP audio interface?
@carpediemearth
4 ай бұрын
What about connecting an interface to a guitar amplifier to use the amp as the output speaker? My amp has an aux connection
@tienomano5986
5 ай бұрын
Bonjour j'ai une scarlett solo 3eme g et je voudrais brancher mes enceintes Yamaha hs4. Quel cables dois-je utiliser des TSR ?
@LeftyPencil
9 ай бұрын
3:48 if you dont see this area to select the input, press the red circle to Arm first - Reaper v7.07
@grantm902
Жыл бұрын
Balanced->Unbalanced can lead to a -6dB reduction in signal, depending on the input design
@bhavikparmar9435
3 ай бұрын
I have laptop that support thunderbolt 4. Is focusrite thunderbolt asio better than regular focusrite usb asio if i use thunderbolt cable ? Will it give lower latency?
@beenay18
Ай бұрын
How to use speaker mic directly with loudspeaker without pc? I want to use it for singing. It works with pc but does not work directly with speakers? Any insight?
@maesl69
4 ай бұрын
The interface I use is the Native Instruments Komplete Audio 1, and I want to connect my gaming headset (I'll be switching to studio headphones soon). However, this doesn't work as intended. When I plug the 6.35mm jack into the headphone jack of the interface, I get sound, which seems great. But, my system stops receiving sound from the XLR line input until I disconnect the headphones. I've seen recommendations about "routing" the outputs and inputs correctly, but I'm unfamiliar with this term and unsure how to fix it. I hope someone in this great community can help me with this dilemma. Also, is it possible to turn a mono line input, into stereo by tweaking some settings?
@murugan1960
2 ай бұрын
super nice explanation
@sildz1027
2 жыл бұрын
Thank you. This is really helpful!.😊
@444_Ω7
3 ай бұрын
I thought I'd set the sound peaks just right, but in the end I didn't. The problem is that, on FL studio, I have no way of knowing whether "the peaks of [my] signal are about -18 to -12 dB" on the meter. I also realize that I've been given no way of adjusting the feedback delay when I installed my driver. Could someone help me here?
@justinscott9733
9 ай бұрын
Instead of using headphones can you use inner ear monitors and record from them?
@FelipeRodriguez-eh6ty
10 ай бұрын
Is there a proper way to disconnect your Scarlett 2i2 4th gen? Or is there something I should do before I disconnect? I heard if you have 48v or phantom power on and you disconnect it could mess up your unit, I heard it’s best to turn it off and then disconnect, is this true?
@TheSilverConductor
8 ай бұрын
I MusicLuv It! You have made this all make sense 😎Keep Doin Whacha Do! THE SC.
@koppulapremsagar
11 ай бұрын
Will the audio interface provides phantom power or we should buy seperate 48v phantom power..
@AudioUniversity
11 ай бұрын
Yes. Most interfaces have the ability to provide the microphone with phantom power.
@koppulapremsagar
11 ай бұрын
@@AudioUniversityor else we need it right?
@AudioUniversity
11 ай бұрын
Yes. Back in the day, I had an interface that couldn’t supply phantom power. In that case I used an external phantom power supply. Remember though: you only need phantom power for condenser mics and active dynamic mics.
@koppulapremsagar
11 ай бұрын
@@AudioUniversity thanks broo, love your response
@koppulapremsagar
11 ай бұрын
But bro, could this interface improve audio quality independent of the microphone using?
@wanderingturtles5323
2 ай бұрын
so wait how is it getting 48v from a 12v USB input, does it get its power from the laptop/computer or is it an external power?
@Christablaze.studios240
7 ай бұрын
Thank you, you made it easy!
@janosszucs7127
Ай бұрын
I have bad sound quality when I want to record guitar but I use AirPods...is it because of the AirPods that it can't handle?
@CMDR-Cody
6 ай бұрын
Hi I hope this isn't a dumb question but I am having a conference and we have guest speakers that need to have audio output to PA speakers and also to a computer that will be live streaming will an audio interface be the way to do that?
@TANAPOL.
2 ай бұрын
this video really useful.
@yusufgultekin5313
2 жыл бұрын
Thanks!
@AudioUniversity
2 жыл бұрын
Thanks for watching, Yusuf!
@nickhell
10 ай бұрын
I have a condenser mic and a focusrite Scarlett solo. If I go over 11 o'clock in the gain I get a lot of noise. Like white/pink...
@BrianMarcWhittaker
2 ай бұрын
What about the master volume settings? 50% or 100%?
@arturojc6974
Жыл бұрын
Can you recommend an interface for playing live connecting your microphone to the PA system, without using a computer as the main link ?
@lucasalegno1037
3 ай бұрын
Hii, i have a question. If I don’t connect speakers does it work? Because i want to record only
@mahuubao
Жыл бұрын
Excellent ... well done ...
@AudioUniversity
Жыл бұрын
Thank you!
@itsUndertaker-xd
2 ай бұрын
i have a question, if i have connected speakers and headphones to the interface, and wanna hear the music from headphones rather the speaker how do i switch?
@dzeronut_boy
3 жыл бұрын
Could you do a video on using the Scarlett 4i4 for reamping guitars while using studio monitors/headphones? (Kinda confused with the output routing) Say I want to connect the reamp box to line output 1 and line input 3 (since I'll be using headphones to direct monitor). Would it work out just fine?
@AudioUniversity
3 жыл бұрын
Great idea for a video! Thanks. The signal flow would look like this: Focusrite Output > Reamp Box Input > Reamp Box Output > Guitar Amp Input > Guitar Amp Speaker > Microphone On Amp > Microphone Output > Focusrite Input In your DAW, you route the guitar DI signal out of the interface to the reamp box and into your guitar. You'll be setting up a new track for recording the microphone. Choose whichever inputs and outputs you want, just be sure to set up the correct I/O settings in your DAW.
@XandetheXande
2 ай бұрын
HELP! instead of a heaphone, can I connect my guitar amp on the outputs intead: anything else I need to do?
@mawejjeronald5507
Жыл бұрын
Yes thanks for the video but i need drivers for scarlet now what should i do and were can i find
@AudioUniversity
Жыл бұрын
Go to the Focusrite and look for the downloads for your interface.
@michaelsotomayor5001
Жыл бұрын
I have to ask.. can I connect a gauge cable into 1/4 headphones into my interface and run that into my speakers with a frayed connection? It should be okay right? Or do I have to buy 1/4 headphone cable and disconnect one end of the cable and use those wires to use the speakers?
@ArrakisOCE
7 ай бұрын
Please tell me how I can add an FX loop of guitar pedals (for insertion as an effects BUS in the DAW)? I don't use an amp - only software sim.
@AudioUniversity
7 ай бұрын
Check out this video: kzitem.info/news/bejne/tKCw03htq3acYIIsi=yT1TVephG2qetdrg
@ArrakisOCE
7 ай бұрын
Thanks, that is another great video. I've looked into the Radial EXTC already which would be perfect if it was also an interface or could send and receive audio to the DAW via USB. I am using an Apogee Duet as my main interface for guitar in and studio monitors out and have no spare inputs or outputs, therefore trying separately to find an interface that I can use as an outboard FX loop for my pedal shelf/rack - for routing to the DAW as an insert (ideally two channels so I can run pre and post amp pedals via a remote MIDI switcher). The closest thing I have found is the Boss IR-2 although it seems a waste to only use it as an FX loop and I don't know that I can disable both its amp and cab sims together. I might have to bite the bullet and get another primary interface with more IO as well as a reamp box as you suggest. Thanks again, great channel. @@AudioUniversity
@Nonyabizznaz
8 ай бұрын
What does the interface do ? I’m trying to record a project and I’m trying to avoid any white noise in the background of the recording. I just got a new mic and still have the issue. Laptop is brand new too. Would a interface help with this ?
@sureshkumarpani3644
3 жыл бұрын
Plz make a video how to set two mic or a mic and instrument at the same time to record i m rearching but unable to get .....waiting for that video
@AudioUniversity
3 жыл бұрын
I'll show you how to do that in this video: kzitem.info/news/bejne/rImp3Gtqml94eHY
@StormbreakerYT
4 ай бұрын
Hey , I need help with my interface I’m having a weird Quantization Distortion Effect that every minute or two kicks in for like 2 seconds . My speakers are fine and my pc aswell . Is it my fault or is the interface broken ? Couldn’t find any infos about it online so I thought you could help me .
Пікірлер: 268