Thumbs up if you are about to go use YOUR E-Z Command Control System! Go E-Z Command!
@jacksonsoto5308
3 жыл бұрын
This video is surprisingly very helpful! Thank you very much bachmann for your (sometimes) amazing locomotives and (always) amazing tutorials
@jdc121
2 жыл бұрын
Bachmann has always worked for me with no problems.
@robbykoopman5559
2 жыл бұрын
@@jdc121 same, All my stuff is Bachmann and I have no idea why everybody hates on Bachmann
@Gevoface
2 жыл бұрын
@@robbykoopman5559 fr
@nw611productions3
Жыл бұрын
I think Bachmann gained a bad reputation in the 80's and early 90's, because almost all steam locomotives had wheel quartering issues and diesel locomotives' gears cracked, causing a loud click sound.
@BachmannTrainsUSA
7 жыл бұрын
No - it is DCC
@barronforce2.0_brigadeedition
Жыл бұрын
Good joke
@BoTheshow-21
Ай бұрын
Hi buddies
@studioa9728
5 жыл бұрын
Childhood Memories! I used to watch this video all the time when I played with my HO Thomas And friends trains.
@tryorse8340
5 жыл бұрын
I bought a bachmann engine but it won't run. It can receive power but its wheels won't move. Please help
@BachmannTrainsUSA
5 жыл бұрын
Contact our Customer Service Team, toll free in U.S./Canada, 800-356-3910, ext. 304 or 305.
@marylandsirensfirebuff9664
3 жыл бұрын
How do I control the sounds? The one I want to buy has the sound value but I am not sure how to do the sounds on the controller?
@robbykoopman5559
2 жыл бұрын
Use the function button
@danielmcdonald7933
8 жыл бұрын
I am using a DCC on Board train and the EZ Commnad. For some reason the train won't activate or respond unless I push it, even then it only runs for a couple inches then stops. PLEASE HELP!
@ax2bxc
7 жыл бұрын
Daniel McDonald Have you cleaned the tracks and the wheels
@IFrostOrigins
7 жыл бұрын
Hownottobuild This is my second account but I'm pretty sure I cleaned it when I posted that comment. I forget how I cleaned it though... Is there a certain way or thing I should use to clean it?
@josephdodd5840
3 жыл бұрын
Does this exist for n scale?
@robbykoopman5559
2 жыл бұрын
The power can be run into into N scale track
@CodysTrainz
2 жыл бұрын
What is the Rail Height Code for your track, I would like to use standard sections with the ez track, I have code 83 and way more code 100
@BachmannTrainsUSA
2 жыл бұрын
Our E-Z Track® range is code 100
@LittlePwnageMusicFan
5 жыл бұрын
Is it compatible with Atlas track?
@AdiposeExpress
5 жыл бұрын
It should be, I've actually connected some old Atlas track to the Bachmann E-Z track, and everything works just fine on both. The power connector will be different for the Atlas track, but it shouldn't be difficult to make an adapter.
@BachmannTrainsUSA
7 жыл бұрын
You can probably get one by contacting the Bachmann parts department
@KandiKlover
11 жыл бұрын
I just bought the bachmann DCC starter set that comes with 2 engines, it's freaking awesome!
@LyubomirLalovMulti
4 жыл бұрын
Lovely Video clip! Forgive me for the intrusion, I would love your thoughts. Have you heard about - Januke Henatalie Formula (Have a quick look on google cant remember the place now)? It is a smashing one off guide for operating a DCC model railroad minus the hard work. Ive heard some amazing things about it and my work colleague after many years got astronomical results with it.
@TheRailandAviationcentral
4 ай бұрын
Was it the commander?
@lennoxpurinton9059
10 жыл бұрын
Nice! I'm planning to get that system. I have the bachann dcc Durango and silverton 2-8-0 locomotive, the bachmann southern 2-10-2, a 2-6-0, a 0-6-0, a Santa Fe 4-8-4 and 4x7 layout on the bottom bunk of my bunkbed!
@RailsoftheNortheast
9 жыл бұрын
That is awesome!
@a-dog8075
4 жыл бұрын
Work with HO?
@BachmannTrainsUSA
4 жыл бұрын
Yes!
@jmar1973
11 жыл бұрын
Just ordered my EZ Command controller yesterday,along with a couple of DCC Locomotives. Me and my father just picked up the hobby again after about 35 years...He's 82,I'm 40...He wantes multiple trains on one track,And sometimes the whole wiring bit can be a bit frustrating. So this is a blessing indeed!
@noahmarquez6485
3 жыл бұрын
Does anyone know if it is possible to convert the locomotive in the rail chief set to dcc?
@robbykoopman5559
2 жыл бұрын
All locomotives as long as they have a DCC decoder or you have a DCC socket with a DCC decoder that you can install will work with this controller
@BachmannTrainsUSA
8 жыл бұрын
The decoders are NMRA compliant and will work with any NMRA compliant DCC system.
@TwinFun0327
8 жыл бұрын
Will the atlas lok sound work? I have been planning to buy a c424
@moziizz
8 жыл бұрын
(with no intention of disrespect) does this work with other items that aren't bachmann? thanks in advance :)
@BachmannTrainsUSA
8 жыл бұрын
The system will work with any NMRA compliant DCC decoder.
@moziizz
8 жыл бұрын
+bachmanntrains ok, great! thanks for your service!
@thegregolahorologyclub6799
7 жыл бұрын
You Guys removed the DC controller Plugin.
@kaneicy
3 жыл бұрын
This is a question I haven’t been able to find on KZitem yet. So I just received a DCC locomotive from eBay, and I don’t know how to recode the locomotive from a multi digit code, to a single digit code using EZ command, since that’s all I have for DCC controllers. Is there a way to do that with it?
@robbykoopman5559
2 жыл бұрын
You just normally program it using the Controller and you don’t need to know the previous code
@dmandc
10 жыл бұрын
Can you use this with bachmann sound decoders
@user-sd7qo7qe4v
3 жыл бұрын
Yes
@gordonwhitlock9697
2 жыл бұрын
Twelve years ago? It sounds like this video was made in the 1950’s-trumpets and all-I couldn’t stop laughing!
@Curious_Skeptic
Жыл бұрын
Lolz. I love it! So appreciate!
@Trainboivr
3 жыл бұрын
Ok ok ok I want this now with a Dcc Bachmann gg1.
@robbykoopman5559
2 жыл бұрын
Actually they do have a Bachmann DCC GG1 I made a video on my channel of when I bought one
@Twohoppies
Жыл бұрын
I kinda threw the plastic covering away for the naming of the trains… 😅
@CartersTrains
8 жыл бұрын
Does all of this work for N scale trains too?
@bloba4443
4 жыл бұрын
Yes
@AngeloteX
8 жыл бұрын
i have an analog DC locomotive runing with this E-Z digital controller, but the speed is very slow. do you know the reason?
@Vrod1432
7 жыл бұрын
Will the EZ companion # 44907 ever be available again ? If so when and where can I get one ?
@mosincat5075
4 жыл бұрын
Yes it is here :www.walthers.com/e-z-command-accessories-walk-around-companion
@williamwilson2555
8 жыл бұрын
if you sith train will it run
@elleryparsons5766
6 жыл бұрын
I run Bachman and I love everything about it,I run n scale and I love it won't sell or trade for the,world.
@CamsModelTrains
6 жыл бұрын
With the regular controller can you run non-Dcc locomotives or not
@CamsModelTrains
6 жыл бұрын
Sorry you probably can never understand me I meant when the DCC controller is plugged in on the other side of the board can you plug in a regular controller and run non doc locomotives
@Trainlover1995
5 жыл бұрын
I've known of the E-Z Command system since it first appeared in 2004 catalog. It was my first exposure to DCC. After that, I came to learn of DigiTrax, MRC, NCE, Lenz, and ESU. And, no offense to Bachmann, I've found the best of the bunch to be NCE. Of course, rather than an NCE throttle, I usually use my own iPhone and the WiThrottle app, all at my model train club.
@JW1999
7 жыл бұрын
I say some other videos and I just saw a video of MTH HO NKP 765 because I saw he runs with EZ Command Control and evening Lionel HO Polar Express because I just saw that video. I might get one soon.
@tengotrax4669
3 жыл бұрын
Can you use Atlas locomotives for this?
@BachmannTrainsUSA
3 жыл бұрын
Bachmann's E-Z Command should be compatible with most other brands of locomotives.
@0501marcos
8 жыл бұрын
I got the Bachman Thomas whit Annie and carabel and that one is my sons first Bachman
@milepost241productions5
8 жыл бұрын
will the E-Z command work with DC locomotives
@patrickspies1869
4 жыл бұрын
Milepost 241 Productions no
@carterbrown3807
4 жыл бұрын
Haha late reply but it does, I use dc locomotives white my system
@ZakWolf
4 жыл бұрын
@@carterbrown3807 Yeah it does, but I rarely use analog locomotives regularly on my current layout. But on my previous layout where I used the E-Z Command system I had an isolated siding that I could switch the power on and off to, for parking an analog locomotive on, so I wouldn't risk damaging the motor from letting it sit getting power for too long.
@overpoweredsteamproduction513
4 жыл бұрын
Yes but don’t run the DC engine on the DCC track for too long. It will damage the motor of the locomotive if ran for more than an hour
@bluskidu
4 жыл бұрын
It can but it’s not healthy for the motor of a DC locomotive
@mrmax128
8 жыл бұрын
I got a DCC engine from u and I try programming it to a different address on a digitrax and I coundnt program it to the address 3002 and I really need help but I can't find any.
@BachmannTrainsUSA
8 жыл бұрын
Perhaps call Digitrax?
@floridasteamer
4 жыл бұрын
Just got one of these today, Great product Bachmann! 👍
@butterbean4195
7 жыл бұрын
I know this is old but I cannot find that black interconnecting cable. it wasn't in any of my sets I have from Bachmann is it sold separately?
@mscat2486
Жыл бұрын
I would like to know where to get this as well
@bubbachunk6168
7 жыл бұрын
Will someone please explain to me why the left handed crossover from Bachmann is very unpopular and on top of that when I was looking for them on ebay everybody was wanting the "Right Handed" ones instead. Why is this the case? I have a left hand no. 6 Crossover with two controllers item number 44575 and noticed that they are not in demand....why again I ask? Do people prefer going right instead LOL
@vkratish
10 жыл бұрын
Does it work with N scale models.
@thehudlessfarmer
10 жыл бұрын
I believe it will work with any scale as long as you can fit a decoder in your loco!
@jessicarhoades9996
8 жыл бұрын
I don't have this one. but wanted to check if you knew anything about a DC master module if so please let me know.
@philelsner105
2 жыл бұрын
my bachmann ez controller started blinking and nothong will run on my layout.
@BachmannTrainsUSA
2 жыл бұрын
Hi Phil, this sounds like you have a short somewhere on your layout. Check your track connections and ensure they're tight and correctly aligned, look for any rolling stock that might be derailed, and check to make sure that no metal items are making contact with the rails (other than wheels).
@kacyhopper
12 жыл бұрын
THUMBS UP.
@nityking1
7 жыл бұрын
When you connect the 2nd controller (DC) will older locos still be prone to overheat and cause issues
@jh-kn2bc
4 жыл бұрын
I have a dcc locomotive on dc layout because I'm not paying another 100 dollars for a ez command controller
@mattluker1425
3 жыл бұрын
What if you done know the address number and you bought the dcc train used.
@robbykoopman5559
2 жыл бұрын
You can program it so that way it’ll be with a new DCC address regardless of what the previous one is
@csxrailfanfoamer8118
3 жыл бұрын
What dc locomotives can I do the same with this controller as like the other locomotive that was shown in this video?
@robbykoopman5559
2 жыл бұрын
You can control DC locomotives with this controller but to have the consist and lights and sound features you have to have a DCC decoder in the locomotive
@ToastTheThe
2 жыл бұрын
0:51 didn't age well.
@ClassIRailroader
9 жыл бұрын
please bachmann answer this question: if the ez command controller says "light" instead of "function" will that button still work as the function button or am I gonna be ripped off and only be able to turn on the light. I was told I would have 10 functions able to control sound. can u answer this question please ASAP!? thank you
@user-sd7qo7qe4v
3 жыл бұрын
Yes
@trainjack16
8 жыл бұрын
Is that what comes in the controller set
@riverlifeva
7 жыл бұрын
Help I got a DCC setup and it didn't come programmed to 3 ,according to your video here I'm getting a short circuit signal every time I put it on the tracks? any help would be appreciated.
@Memjay
6 жыл бұрын
riverlifeva maybe it’s the train
@davidtheriot3205
3 жыл бұрын
The problem is in the Locomotive.
@kelleyshields9751
5 жыл бұрын
Can you controlled sound, like the horn or bell?
@davidtheriot3205
3 жыл бұрын
Yes
@timwest4800
3 жыл бұрын
I have a digitrax dcc equipped athearn s12 I am trying to program it to run on both dcc and analog dc I have a ez command controller and I am unsure if it will kill my decoder to program it to 10 which is for analog locomotives
@coleslaw110
9 жыл бұрын
When you say "One Analog Loco", do you mean one DC engine? If so, you're a life saver!
@AlexTrain5249
7 жыл бұрын
yes that's what it means
@BattleshipOrion
6 жыл бұрын
Well that means i can run my old athearn blue box bnsf number 2099
@tylerturner1236
11 жыл бұрын
Hello,the plug for my ez command track wire ,the plug that connects into the ez command itself broke does bachmann sell replacment track wires for the ez command?
@davidtheriot3205
3 жыл бұрын
Yes
@johnthomassharpe6280
5 жыл бұрын
bachmann can the e-z command run on30 4-4-0 yes or no let me know my name is jt.
@davidtheriot3205
3 жыл бұрын
Yes, if your On30 4-4-0 is DCC it will run it.
@mancast-bx6hi
2 жыл бұрын
Although dcc is cool and awesome, i still prefer dc because it's cheaper and simple to use.
@ncopictures7182
5 жыл бұрын
Is this controller also good for large layouts with a very long distance?
@davidtheriot3205
3 жыл бұрын
You will need to purchase the Bachmann DCC 5amp booster for large layouts.
@ClassicRockFan-hv8rd
8 жыл бұрын
if I have 2 dcc contorlers can 9 run on 1 and 9 run on the other
@davidtheriot3205
3 жыл бұрын
You can only use 1 EZ Command Station. If you want to have 2 control panels, you have to use one command station and one walk around companion. If you try to use 2 Command Stations they will cause a short circuit.
@yoyok2037
5 жыл бұрын
Unfortunately there is no model train store in Indonesia. You will be surprised by the number of model train fans in Indonesia. Please open a shop in Indonesia, let us buy directly at the store
@Bismarck42170
2 жыл бұрын
Could this system be used for n scale?
@BachmannTrainsUSA
2 жыл бұрын
Yes, our E-Z Command® system can be used for N, HO, and On30 Scale, as well as with larger scales with our #44910 Power Booster.
@amittrains3736
7 жыл бұрын
Can we change from the default 28 speed steps to 128 speed steps using this controller ?
@davidtheriot3205
3 жыл бұрын
No
@Ryotenian7826
3 жыл бұрын
Does anyone knows if bachmann locos will work with kato unitrack?
@BachmannTrainsUSA
3 жыл бұрын
Hi Ryoten99, yes, our HO and N scale locomotives will work on Kato Unitrack!
@Ryotenian7826
3 жыл бұрын
@@BachmannTrainsUSA thank you
@robbykoopman5559
2 жыл бұрын
@@Ryotenian7826 All trains will work with all track as long as it’s the same scale
@michaelhorath6851
Жыл бұрын
@@BachmannTrainsUSA Hi, will it work with Atlas tracks too ?
@BachmannTrainsUSA
Жыл бұрын
@@michaelhorath6851 Yes, all Bachmann models are built for use on any standard HO scale track system.
@sawyerahbiesadventuressaa4158
2 жыл бұрын
Do yiu have to us the modern track.
@robbykoopman5559
2 жыл бұрын
If you were asking if you have to use modern track as long as it’s clean and conducts power well and can be hooked up to the controller it will work
@deniseperazzini1295
6 жыл бұрын
Bachmann Thomas Works with ez command?
@BachmannTrainsUSA
6 жыл бұрын
No - Thomas models are not Digital Command Control
@markl3893
8 ай бұрын
Bachmann needs to re-edit and update this video. Address 9 is the default for their switches, but when describing how to switch assignments for engines the narrator said it was OK to use 1 through 9.
@TheDarrin10
2 жыл бұрын
my controller quit working , I unplugged it for 30 mins and the power light will flicker a little and then nothing I used it for 10 mins
@PushkarThakar
3 жыл бұрын
I have the Bachmann DCC EZ command control center (item #44932), which does not have the option to connect accessories. So, how to connect remote turnout red wire.
@0501marcos
8 жыл бұрын
Right son Marcos paderon,s yup
@davidlynch9475
5 жыл бұрын
Wow. You like your GP-40’s huh
@kidreviewsmodels460
4 жыл бұрын
Lol
@AntonyWatkinson-il5pm
2 ай бұрын
Still a good product today, you don't need more than 10 engines at once.
@davidsheriff8989
3 жыл бұрын
This looks straightforward and simple
@dozilwolf_196
6 жыл бұрын
Do Bachmann trains with DCC Sound Value On Board work with the E-Z Command Center?
@sebastianfruth4923
6 жыл бұрын
Yes
@OldIronVideo
Жыл бұрын
7:38 so how does this make any sense running a DC engine with a DCC engine? Is the DC engine running at enough track power to power the DCC engine?
@agonquin
2 жыл бұрын
Let me see if I understand what your saying here Mr Bachmann trains Guy that at "video clip" 7:13 your saying that I may use a Power pack; speed controller and engine from another Bachmann train kit and it will allow me to operate that engine with a DCC controller track layout ?
@Curious_Skeptic
Жыл бұрын
Yes!
@agonquin
Жыл бұрын
@@Curious_Skeptic because I saw others mention it will burn out DC engines
@Curious_Skeptic
Жыл бұрын
@@agonquin I would think that would be true if running on lower speeds and old engines. I'll play around with it and let you know. I have some old junk engines I can try. Just powered up the EZ Command. Worked perfect. Running a Bachmann 2-8-0. (Ticked off, as I was told the engine had sound when I bought it! UHG). Anyway... If I run into issues, I'll share. Happy to be a test subject. LOL.
@agonquin
Жыл бұрын
@@Curious_Skeptic LOL thanks ... I tried it too and it works but not going to run it for very long as I think that's the deal breaker other people had the issue with
@Curious_Skeptic
Жыл бұрын
@agonquin All my trains are packed up for who knows how long. 😞 I will say most everything I tried ran fine though. As you say, just down run for extended times.
@davebolyard6808
10 жыл бұрын
Hi I am being given a HO Scale layout and am wondering about useing Bachnan EZ track not sure yet if I will need to replace any thing thank you for posting these videos Dave
@c23onrails
Жыл бұрын
My dcc controller keeps on not showing the stop light I’m doing what this tells me too and it’s not working
@jacob8804
6 жыл бұрын
Question, when it says the analog loco, can I run dc and dcc with this?
@BachmannTrainsUSA
6 жыл бұрын
You can run one DC locomotive on address 10
@trainjack16
8 жыл бұрын
The 2 track power wires comes with the controller set
@Conman_57
6 ай бұрын
I tried it, but my locomotive won't move unless it's on 10.
@SpaceageAfricanAstronomyClub
7 жыл бұрын
Can u consist a DCC lead engine with a DC engine? I'm switching over to DCC and I'm trying to figure out which system to use.
@BachmannTrainsUSA
7 жыл бұрын
No.
@SpaceageAfricanAstronomyClub
7 жыл бұрын
Thanks. I ordered my EZ command controller today!
@waynelattin172
11 жыл бұрын
my friend programed a double unit and I cant program seperetly
@101MTA
11 жыл бұрын
Can I hook up my switch track wires to it?
@CentralFloridaThrills
6 жыл бұрын
I love it
@philelsner105
2 жыл бұрын
my trains werte running before i installed the machmann turntable.
@thomascranford6594
7 жыл бұрын
Can it be used with DC
@TubeDude2013
9 жыл бұрын
Good review on E-Z Command! I have a review of my own on my channel regarding Bachmann Dynamis. Its the full featured wireless upgrade to E-Z Command. Its Bachmann's premium controller. I also put a how-to video up there that shows how to use Dynamis with DCC turnouts. Check it out if anyone is interested.
@flfridayscratcher9243
10 жыл бұрын
i just got a switch track today and do not know wat to do and i got a dc controller and this is my first switch track wat do i do
@steamloco
9 жыл бұрын
Please help for speeding. How do chance to low and high speeding. These Locomotive was fast need to calm smooth slow?
@benmack1334
6 жыл бұрын
Do you need a decoder in every dcc locomotive to be able to use it with this remote
@davidtheriot3205
3 жыл бұрын
Yes, if you want to run in DCC. You can use address 10 to run a non DCC locomotive.
@KoltonAlan
8 жыл бұрын
The other day i was running my Bachmann DC Chattanooga engine and the smokestack started melting! it is not a older engine about a year old I had it on low power and running with smoke. but even without smoke, it will still get hot! I am afraid to run it. any advice?
@Mate460
5 жыл бұрын
All the analog locomotives overheats when you are using the ez command
@doncasterrailway3241
4 жыл бұрын
I just got that dcc controller and it doesn’t work and my engines make weird noises when on the track and the dcc doesn’t work on the analog
@theordinarypeanut9065
5 жыл бұрын
Does the black connecting wire come with the DCC controller? 7:21 edit: OMG HE HAS GREEEN 4501? 9:32
@TheAtlantaRailfan
3 жыл бұрын
Thats 722
@theordinarypeanut9065
3 жыл бұрын
It’s been 2 years I’ve matured and you don’t have to respond
@bennyvega100
11 жыл бұрын
I can't wait to try this!
@cheesewonton4595
4 жыл бұрын
Pretty late but I want to get a dcc ready usra 2-8-2 loco and how do I install a decoder?
@Memjay
6 жыл бұрын
Does it work on Thomas and friends
@BachmannTrainsUSA
6 жыл бұрын
No - only DCC equipped locos
@FPHfan-pz3th
4 жыл бұрын
I don’t use an old DCC controller but I’m planning to have to have this i use EZ track
@jorgealessandrolopez5352
2 жыл бұрын
Bachmann dónde puedo conseguir más modelos de trenes?
Пікірлер: 267