Awesome that you're making an openGD77 series, your videos are going to be very helpful for a lot of people.
@HAMRADIODUDE
4 жыл бұрын
Thank you for the kind words! I greatly appreciate it
@FEPLabsRadio
4 жыл бұрын
Dude, really appreciate the info on the 1801. I've had one, and just discovered the opengd77 firmware. your video has a great amount of info, saved me a bunch of time.
@HAMRADIODUDE
4 жыл бұрын
Thank you for the kind words. I'm glad it helped!
@red2965
11 ай бұрын
Thanks for your time helping us with this radio. I just bought this radio to catch some of my neighboring County's calls hopefully I can figure out how to actually program it😂 Now i just have to wait for a power adapter 😪 since baofeng decided to send a EU power transformer for the states
@RB-rl7kv
3 жыл бұрын
Since you're in the Baofeng space, any chance of getting a series like this for the DM-5R?
@HAMRADIODUDE
3 жыл бұрын
I have a few videos in the works (non baofeng related), but I can put it on my list! Thanks for the suggestion!
@bobtheman1
3 жыл бұрын
Hi Ham Radio Dude, this was a very helpful video! I have 2 questions: 1. Does the backlight remain on when receiving transmissions? On the Tidradio TD-H6, it does, and there seems to be no way to change this setting. 2. Do you know if the Tidradio TD-H6 is a rebranded Baofeng DM-1801? Thank you!
@HAMRADIODUDE
3 жыл бұрын
Hello, the Tidradio TD-H6 looks like a rebranded DM1801, but does not appear to have DMR capabilities. I will say as far as the setting goes for the backlight, I am not certain. However, try this: Menu -Radio Setting - Backlight - and then you should have options for 5s, 10s, 15s (if it is anything like the dm1801 as far as the menu goes). Best of luck!
@kb9liq
4 жыл бұрын
Can you tell me which radio you think is better between this baofeng and the GD77? Looking for something to monitor both bands at the same time. A few analog VHF channels and a couple of UHF DMR channels. Thanks
@HAMRADIODUDE
4 жыл бұрын
Essentially the same. Strong irreverence to the gd77 for two reasons: support should be easier to obtain if there is an issue and custom firmware is more developed on the gd77
@josejcruz7998
4 жыл бұрын
Hi I’m trying to add the marine frequencies to my DM-1801 and it’s giving me error out of band message. Do you have any suggestions of why that could be happening? Thank you
@HAMRADIODUDE
4 жыл бұрын
Yes. Menu, options, band limits ----- set to off. That should do it
@josejcruz7998
4 жыл бұрын
HAM RADIO DUDE Thank you so much it worked perfectly.
@HAMRADIODUDE
4 жыл бұрын
@@josejcruz7998 anytime
@losientobebe5183
4 жыл бұрын
I have the baofeng dm1801 I did the firmware opon gd77 Everything works great but now I cant tx on FRS OR GMRS NOW WITH THIS FIRMWARE I PUT TO THE DM1801 SAID OUT OF BAD
@HAMRADIODUDE
4 жыл бұрын
There is an option in the settings to enable extended tx. I don't have the radio with me, but if you change that setting, you should be good
@HAMRADIODUDE
4 жыл бұрын
Actually it back may say "out of band tx" and it should be on.
@losientobebe5183
4 жыл бұрын
I GOT IT NOW THANK YOU VERY MUCH
@wc3sam
4 жыл бұрын
so with the custom firmware can you add contacts now?
@HAMRADIODUDE
4 жыл бұрын
I was able to. I don't have the radio handy to confirm. Sorry for the delay
@kb9liq
4 жыл бұрын
Can anybody tell me how well this radio or the radioddity GD 77 work on commercial repeaters? The anytone lockup on some commercial repeaters
@HAMRADIODUDE
4 жыл бұрын
I haven't had any issue with the either this or the radio oddity locking up and I use it on several repeaters
@erics6177
4 жыл бұрын
Tristate! My favorite
@losientobebe5183
4 жыл бұрын
HOW CANT I CHANGE FROM CTCSS TO DCS . I PRESS TOP SHORTCUT SCROLL DOWN TO FILTERS:CTCSS WHERE IS THE OPTION TO DCS ?
@HAMRADIODUDE
4 жыл бұрын
Great question. I don't know if they have implemented that yet. your best bet is to check out opengd77.com and check the forums. It appears it could be done in the CPS but on the fly changes via FPP, I'm not too sure. Sorry I couldn't be of further help.
@n1kkri
3 жыл бұрын
is it time for a new "how to" install the firmware. I think they have changed how you do it.
@HAMRADIODUDE
3 жыл бұрын
I think they got rid of open gd77 all together
@HAMRADIODUDE
3 жыл бұрын
Much appreciated. Maybe I'll bust out the old radios for one more go
@n1kkri
3 жыл бұрын
another link that is suppose to show the steps for the installation. opengd77.com/viewtopic.php?f=5&t=1770
@n1kkri
3 жыл бұрын
@@HAMRADIODUDE Your welcome. To be honest it is a bit confusing this new version. It would also be good should you do another how to, show how you can back up the EPROM as well as a few other things should you ever want to go back to the original Baofeng firmware. From my reading once the radio is flashed should you crate a new code plug you won't be able to back up the EPROM for it to work on the original firmware. The backup has to be the first thing you do after flashing the radio with the new firmware. I found my self reading for several hours. Someone who has done this recently would be helpful stream lining everything that needs to be done including the need to go back to the original firmware.
@themajasticcreature
2 жыл бұрын
Sad the dm1801 is dead. Now. They have these shitty dr1801 which you can't even program
Пікірлер: 33