Hi Rick, thanks for this content, I hope u can make a video with u reset process.
@rick601a
Жыл бұрын
kzitem.info/news/bejne/q2ac3nWJiXmEqm0
@rick601a
Жыл бұрын
Here is the link to reset
@w124mercedes7
Жыл бұрын
What Are these grand prix radios worth . I have a nice one from my 1987 mercedes. I got a cd player instead of cassette.
@amitv.2510
2 жыл бұрын
I accidentally removed the plastic screws you mentioned not to remove around 6:30 in and the volume and seek pins are now loose. Can you please post an image or video of how they should be set? You said impossible, however I’d like to give a try. Thanks.
@ericfore
Жыл бұрын
I have a working 754, and wanted to adapt a bluetooth module to the AM function. Can you show where would be best to solder it in?
@cwmoser
3 жыл бұрын
Great Video. I have a Becker 754 that the display works but no sound out the speakers. I took it to my bench and opened the case like you did but just did a cursory look. I need to open it up again and carefully check those Capacitors.
@rick601a
3 жыл бұрын
It’s possible that the gold pins are not seated properly. Some times when the 754 is opened they don’t get seated good. Some times just carefully open it back and verify all the pins are clean and none are bent. Make sure they fully seat. This along with capacitors are the only major issues with the 754.
@rick601a
3 жыл бұрын
If you do get into theft mode there is a video link in the description of this video that explains how to reset the 754 without the dealer tools. It does however require some inexpensive tools and some basic electronic knowledge. Hope this helps.
@mirajeram9447
2 жыл бұрын
I would be very happy if you could help me. My Becker 754 worked well for a while, then at half volume and normal again. Now the light is on, but it writes CODE and it doesn't work. How can I repair it myself? If not, where do I send it for service? Thank you.
@matveyyang4770
2 жыл бұрын
Wonderful video. I'm considering doing a repair for my own Becker 754, and just gauging where to start cleaning and resoldering new caps. The radio doesn't power on at all, even not into anti-theft mode. The illumination bulb does light up however. Visual inspection doesn't show any blown caps, and boards and contacts appear clean. Any idea where to focus my efforts? Thanks
@rick601a
2 жыл бұрын
Start with caps and cleaning with alcohol. I’m sure you will find some green stuff on some of the gold contacts. Careful cleaning and caps replaced should bring it back to life. I have did several that was in that same shape no power and it was always caps and cleaning connections. Hope this helps
@rick601a
2 жыл бұрын
Also if you get into theft mode I have a video link in my videos that links to the code in the ram and information on how to reload the radio without the dealer tool. If you don’t have access to a dealer tool. It is a little complex but it gets the job done
@juniorsilverio9071
Жыл бұрын
@@rick601a Hello, I'm looking for this video that you show how to recover RAM, but I'm not finding it. I'm from Brazil and here we don't have anyone authorized to have the tool. my becker appears the 4 dashes
Hello, great video. I have a becker 754 but without Display Board/driver like on 5:58 . Do you have information where can I buy that part?
@rick601a
2 жыл бұрын
Parts are hard to find. Usually I find deals on eBay. That’s where all my radios were purchased. I have seen complete faceplates for around $50 listed on eBay. I have a radio that I’m currently looking for a display which is damaged. Been looking for a good deal for some time now. So as they are getting older parts are expensive and hard to find.
@drush3452
Жыл бұрын
My 754 is missing it’s “CR” button. Is there any chance that you have an extra that I could purchase from one of your parts sets? Thanks!
@mohammedalalshaikh251
2 жыл бұрын
How yo gauge lamp can you shawomy
@LiviuRo1
2 жыл бұрын
My volume button does not work, it is stuck on max volume. Is it any easy fix/ cleaning before I send it to the doctor?
@rick601a
2 жыл бұрын
A lot of switches on volume and tuning go bad. You can take the face plate apart and clean and often move the switch contact from a less used button to the volume area. But the face is very very difficult to assemble. Often you can find a good plate on eBay from time to time. Only other choice would be sending to Becker in NJ for service but that gets expensive sometimes.
Пікірлер: 24