You're the best and well educated sound engineer I've ever seen. Thank you for the good work and wish I were able to see you teach live
@ozzieo5899
2 жыл бұрын
Finally.. you are back.. we missed you man.. been waiting forever ... glad you are back.. thanks for all you for us in getting these educational videos out.. The Lord bless you..
@DrewBrashler
2 жыл бұрын
I appreciate that, Ozzie! Thanks so much watching! More videos are on their way!
@timoteimicliuc607
2 жыл бұрын
Nice to have you back Drew, great video as usual. I would only like to mention a few points that may have been left out: 1. The low and high bands are shelf type by default but could be changed to parametric by selecting the settings icon in the top right corner of the display (the round gear icon) whilst on the eq page 2. The high cut and low cut filter’s steepness (db per octave) can also be adjusted, same procedure as above 3. All channels (except aux ones) have an additional eq (3 band parametric) for the bus sends. 4. There is also a 3 band dynamic eq FX that could be inserted same as the 31 band eq FX that you mentioned. 5. The tilt Eq comes in really handy for me when dealing with proximity effect on shared speaker mics so rather than re eq-ing I can just use the one knob tilt function for speed All in all very thorough video and very well explained. I can’t say it enough how glad I am that you’re back, looking forward to seeing more from you. I’ve learned a lot from your videos. Bless you brother!
@chrisstone8828
2 жыл бұрын
How about a step by step SD card virtual soundcheck video?? Would love to see one. Not any very good vids on youtube for virtual soundcheck.
@Gurskiyav
2 жыл бұрын
At least a new episode!!! Thanks you very much!!!
@basementmidi
2 жыл бұрын
Thanks for the vid! Love to see one on how to create an effects loop with outboard gear for DAW recording!
@itsmatchew
2 жыл бұрын
Yay a new episode!!!
@mmccoy2121
2 жыл бұрын
Finally! I hope all is well!
@valeriutrufin7557
2 жыл бұрын
The upload is a little too late since it's recording. With update 1.15, they have increased processing to AUX channels, now having all 6 parametric channels, as well as an insert. Anyways, loved your tutorials since the x32 days. Helped a lot when buying one and instructing our crew.
@mickeymiguel2726
Жыл бұрын
Brilliantly explained Drew
@music123413
11 ай бұрын
Hey Drew. Thanks for all the good stuff. I noticed while in the EQ section you have the frequency graphs moving up and down. How do you show the graphs?
@matthewsegundavieson4657
Жыл бұрын
How do I clear my eq parameters on the channel I've mixed
@behemoth123
Жыл бұрын
Great console but no RTA on the channels on I PAD APP? also no copy and paste channels on the app? i have to mix on I PAD all times.
@neilmillward6573
2 жыл бұрын
Hi Drew - Thank you for all the x32 and wing videos. Do you have a timeline for the 201 and 301 wing vids?
@DrewBrashler
2 жыл бұрын
Thanks for asking, Neil! I'm hoping to post all of my new content weekly on Monday's at 11am Central. I have a bunch of new videos ready that I am currently in the process of editing.
@LossieBaptist
2 жыл бұрын
@@DrewBrashler Our Wing arrived this week - I've been using your videos as the antidote to shipping delays.... :)
@joellouisfire
Ай бұрын
Are you able to use the RTA with the 31 band EQ?
@dutchgoodwin9130
2 жыл бұрын
Thank You.
@saile_1994
2 жыл бұрын
Why can I not see the frequencies that are being played ? In the eq
@jamesford4607
7 ай бұрын
You need to turn ON the RTA mode by clicking the 'gear' icon in the EQ section, select mode: OVL and color BLU75 and you will see the real time analyzer frequency spectrum. It defaults to mode 'OFF'. You may select amber, red, or blue in various brightnesses, and what portion of the display you want dedicated to the real time analyzer spectrum display.
@victoriacoleman3237
2 жыл бұрын
Hello my name is Victoria and I just watched one of your helpful KZitem events about the Behringer wing. On my consul I do not get the frequency lines that go up and down can you tell me what your setting is on to make it this appear? I’m talking about the light blue lines in the EQ that are going up and down
@compasssocalresorts4259
2 жыл бұрын
Did you ever figure out how to get those blue lines? I am having the same issue. Thanks!
@jamesford4607
7 ай бұрын
You need to turn ON the RTA mode by clicking the 'gear' icon in the EQ section, select mode: OVL and color BLU75 and you will see the real time analyzer frequency spectrum. It defaults to mode 'OFF'. You may select amber, red, or blue in various brightnesses, and what portion of the display you want dedicated to the real time analyzer spectrum display.
@jamesford4607
7 ай бұрын
@@compasssocalresorts4259 You need to turn ON the RTA mode by clicking the 'gear' icon in the EQ section, select mode: OVL and color BLU75 and you will see the real time analyzer frequency spectrum. It defaults to mode 'OFF'. You may select amber, red, or blue in various brightnesses, and what portion of the display you want dedicated to the real time analyzer spectrum display.
@tjblackartist
2 жыл бұрын
Hey brother. God bless. What’s the best way to route a hardware compressor (1176) on my x32 Producer in conjunction with reaper for using it to record in vocals as well as using it for mixing (as an insert). I also have a 2 channel Focusrite with phantom power. Can I use this in conjunction with my 1176 to the x32 for tracking vocals? Like as a preamp? If so how do I route it because it has to be plugged in via usb to operate
@DrewBrashler
2 жыл бұрын
Hey, Tj! You would want to set that up as a hardware insert on a channel, but then you would need to set your X32 to record in a specific way to record with that insert. I have a video about recording with effects, which you would be doing a similar setup to this. Check out the video: kzitem.info/news/bejne/lph3tH-fkGuqpqA. For the physical insert, you would need to use the Aux out as an insert, and insert that Aux 1 to the channel using the Config tab. Using the Focusrite would be tricky along with the X32 because most DAW's only function with one audio device at a time. Hope this helps you get what you need!
@tjblackartist
2 жыл бұрын
@@DrewBrashler yeah I found that vid! And I have been recording in with my 1176 and sonic maximizer. So my next question is after I mix id like to take all the channels (individually mixed) and run them back to my daw so I can render a final mix to stereo. Is that possible?
@tjblackartist
2 жыл бұрын
@@DrewBrashler also is there a way to mix more than 32 channels using the x32? I’m finding that my other channels are used in the aux and effects faders. I’m using the Patrick Guillets daw reaper program to control the x32 with reaper
@TheFirstCustodian
2 жыл бұрын
I hardly understand some of these stuffs around this 2:56. I'm a beginning trying to learn EQ and all these name are like... Argh!
@DrewBrashler
2 жыл бұрын
That is totally understandable! Check out my articles on my website on these two EQ emulations: drewbrashler.com/?s=xtec. Additionally, I have this video that I made on explaining a more basic level of EQ: kzitem.info/news/bejne/sGZu1Yuir52bi20. Hope this helps!
@TheFirstCustodian
2 жыл бұрын
Alright. Thank you so much.
@TheFirstCustodian
2 жыл бұрын
@@DrewBrashler thanks.
@TheFirstCustodian
2 жыл бұрын
@@DrewBrashler the KZitem link might help a lot. Thanks again.
Пікірлер: 34