Would have loved to hear more about the ingredient list and brew steps. Can something be posted, or is there a link to a brew sheet? If it's ONLY about the equipment, then you loose everyone who already has some equipment as a viewer. Just my perspective.
@grain_and_grape
3 жыл бұрын
You’re allowed to have a perspective jens -everyone has one. We were experimenting with something different this stream; this was first and foremost a product demo so the intention was to focus more on the equipment from the outset (I hope we conveyed that message adequately at the beginning.) Your suggestion about putting up a link to the recipe is a good one, I’ll try to get it up. Having said that Ben does actually cover all the ingredients and brew steps in this video. These streams can be long, so it’s easy to miss. Check out the time stamps now listed in the description and you can skip straight to the sections that might be of particular interest to you. It is always a leap of faith when we try something new in a stream. Some people will like what we do, some people won’t. Afterwards all we can do is sit back, gauge the reaction and make adjustments going forward. …I certainly hope we don’t lose everyone who already has some equipment, that would be most of our audience! I’ll keep an eye on the numbers just in case.
@jens5934
3 жыл бұрын
Thanks for your response and posting the additional info. Great service, very much appreciated. 👍
@grain_and_grape
3 жыл бұрын
Oops okay so the second camera was projected to the left side the screen for the beginning of the show. It gets fixed at 7:08. Promise.
@janpcs
3 жыл бұрын
The manual tells you not to put in the malt pipe until the controller prompts you to do so. The reason is that the heating element starts heating the water while the pump is working. When you put in 23 liters of water it will not overflow the mailt pipe (because there is no malt in it yet) so the water stays inside the malt pipe and the heating element runs dry and can overheat. Yet I saw you do it without consequences.
@grain_and_grape
3 жыл бұрын
Hey Jan, you are correct about what the manual says and it is best to follow the instructions as suggested by Speidel for those exact reasons. Add water first, then add the malt pipe, then pour in your malt -you don't want to risk overheating the element. Ben actually added all the water to the Braumeister and then inserted the malt pipe before the demo started, so that step wasn't shown on camera. What I think you saw was him adding the malt at 19:18 ? But yes the water and malt piper were already added in the correct order so make sure you do the same. Happy brewing! 🙂
@leftiesrule
3 жыл бұрын
Appreciated the demo! Unfortunately I'm in the states otherwise I'd have probably been in your shop by now for some of your past live demos. The new Braumeister looks awesome but there doesn't seem to be a whole lot of owners over here. I live pretty close to a MoreBeer but the guys there don't know too much about the Braumeisters. My biggest question is what sort of maximum OG can you realistically hit with a normal single infusion mash and 60-90 minute boil? I know you can do a reiterated mash or double mash and add sugar/DME but it would be nice to avoid that if possible for a 1.070-1.080 OG beer. If I were to get one it'd probably be the 10 liter version.
@grain_and_grape
3 жыл бұрын
Hi Adam, great question. You are right the Braumeisters are awesome machines and we regularly like to push our's to their limit. We did a stream a while back on British IPA where Ben crammed 8kg of Maris Otter into the malt pipe on our older machine and still got a workable mash (he had to employ a few tricks along the way to keep the pump flowing -but I suspect on the new Braumeisters this would be even easier.) He got an OG of about 1.080 which is pretty amazing, but I'd say that is about the upper limit of what you could expect. Unfortunately I can't say for sure how well this will translate to the 10L machines but I would expect you could achieve similar results. Check out the stream here and just skip through for any parts that might be useful to you: kzitem.info/news/bejne/lqGM362vbnWrnIY
Пікірлер: 10