What else would you like to learn about the Atem Mini Pro?
@KSONMUSIC
Жыл бұрын
Can you show me your settings for the ZVE 10 that you use for the ATEM pro. And we have a very similar set up but I can’t get it the camera to connect or the Road caster pro two, PLEASE HELP!!
@shawnebrown
Жыл бұрын
Interested in how you use audio set up for your stream. There are a few good videos out there, but seeing what everyone is doing would be great
@shawnebrown
Жыл бұрын
Specifically wondering if you use any of the audio features like the compressor or limiter
@dez5
5 ай бұрын
Final somebody that make cents without wasting Dollars. Thank you 🙏 🙏🙏
@airwave1and9
Жыл бұрын
One of the best videos I’ve seen, if not the best. Thank you! Very informative
@waltjennette
Жыл бұрын
Thank you so much for watching!
@gabostyle.gsocial
Жыл бұрын
Nice! Currently dealing with all these issues producing a new podcast. Learning curve is real. 😂
@waltjennette
Жыл бұрын
It is but it's all worth it in the end! I hope the podcast is going well!
@hebronmichael6949
Жыл бұрын
Thank you for the information we are in the process of getting our system up and running , very helpful
@waltjennette
Жыл бұрын
Glad it was helpful!
@Enchantedmediapro
11 ай бұрын
thank you!! Brother.
@GiantSlayer-rr1vu
Жыл бұрын
I am PC-driven in starting a home ministry setup.
@ThatSocialloner
9 ай бұрын
Great video
@waltjennette
8 ай бұрын
Thank you!
@bryanevans5934
Жыл бұрын
Love this! Great video
@waltjennette
Жыл бұрын
Thank you!!
@TheGospelSource
Жыл бұрын
This was very good. Thank you.
@waltjennette
Жыл бұрын
I’m glad to hear that! Thank you for commenting!!!!
@ENGLISH-FRENCH-KIDOS-ri4jn
Күн бұрын
I want to learn how to set it up the Atem Mini Pro with obs and restream for my church
@knowledge2currency300
8 ай бұрын
Bother thank you for putting today a great video. This was really helpful I am looking to build my own studio. At the current moment is this still the best way to set everything up? I know this was filed last year.
@waltjennette
8 ай бұрын
It depends on what you’re trying to accomplish in your studio and what your recording workflow is going to be like. If you have to have 4K files then no. But if you’re good with the footage getting compressed down to 1080p (which can be even crispier), then yes, I still recommend using something like the Atem to easily switch between sources. Now, later this year I’m going to be investing in a deck link. Right now I use a 4K CAMLINK but the deck link will allow me to connect all my cameras to the computer and I can switch with Ecamm or a stream deck. You can technically do that now but it will put a load on your machine
@anonymous-user
Жыл бұрын
Thank you Walter. This is a great video. You touched on a lot of topics that are very relevant for small shops, specially at the end there with the Audio stuff. Btw, one suggestion, when using Ecamm Live. It has an audio monitor feature. So, it can be used instead of the poorman's solution (Quicktime).
@waltjennette
Жыл бұрын
So I didn't clarify in this video but the only reason I don't use the monitoring in Ecamm is b/c I'm using the headphone out jack to send the audio out to the sanctuary.
@anonymous-user
Жыл бұрын
@@waltjennette Oh do you do that to be able to playback background music or a sound effect from your computer, for those physically in attendance? If yes, that's interesting. I actually plan to do that as well on my upcoming event! But I'm concerned if it will do feedback... As the sounds I play will come out on my event's local sound system and might be picked by the microphones and come back to Ecamm Live.. you see where I'm getting at? Is this a valid concern ?
@anonymous-user
Жыл бұрын
@@waltjennette I updated my previous comment, it had a misspelling and I figured it was confusing to read.
@waltjennette
Жыл бұрын
@@anonymous-user No worries! Thanks for commenting!
@anonymous-user
Жыл бұрын
@@waltjennette can you read it and please let me know what you think? 🙏
@nicolsontv5852
Жыл бұрын
Dope video
@matthewfrohbieter1803
Жыл бұрын
We’re looking at getting new cameras at our church. What are your thoughts on the ZV E10?
@waltjennette
Жыл бұрын
I have 3 of them and I use them at church! Love them!!!
@FabioCormack
Жыл бұрын
Thanks for the video! Can you connect the Sony ev e10 in 4K 30p with eye AF engaged? I only can get it in 4K 24p with shutter at 60fps so I can match in 60 fps on Atem mini, but saw your video with 4k30p and eye AF with Camlink card. Thanks man!
@arthurllongjr382
Жыл бұрын
My friend and I are going to do a live sports stream channel and at this point we only need two to three cameras. Your video and set up looks great and It looks like Ecam would be very helpful! Would wireless mikes work with the Atem mini pro? Our set up is going to be real simple: both of us in one camera while the other one is on a monitor. Just want the best audio solution. Thanks
@waltjennette
Жыл бұрын
I'm glad to hear it! Wireless mics will work as long as the receiver can go into the mic input on the ATEM.
@vjrvideo
Жыл бұрын
Like your videos. I have a question. I'm struggling to setup my ZV-E10 to send HDMI to my ATEM SDI EXTREME ISO. Which setting are you using on your ZV-E10 to connect to ATEM Mini Pro?
@Deangeloanderson19
8 ай бұрын
Thanks my brother. I have a question We have the atem extreme, mac mini m2 16gB, with ecamm live, soundcraft impact for sound. We were constantly getting a delay even after adjusting the frames in ecamm live, up until Sunday when they turn on echo cancellation. Was this the issue or something else?
@waltjennette
8 ай бұрын
Were you running the Soundcraft directly into the ATEM Mini or into Ecamm? This is an issue I experienced, as well, but it was more an issue with the ATEM Mini moreso than Ecamm.
@nemaostaba_offichial
Жыл бұрын
can we use 5d Mark iv for streaming in church ?
@waltjennette
Жыл бұрын
As long as you have a Clean HDMI out from the 5D, then yes.
@nemaostaba_offichial
Жыл бұрын
@@waltjennette thanks Sir
@waltjennette
Жыл бұрын
@@nemaostaba_offichial You're welcome
@mepropuseserlider8414
Жыл бұрын
Thanks for the info. For some reason, my Atem can't show a video coming in from my Sony 7C. Can you share your settings on your camera and Atem? Thanks.
@waltjennette
Жыл бұрын
Not sure if you were able to find the answer but make sure that you're outputting 1080p from your Sony A7C.
@Jcrjonathan13
Жыл бұрын
You have to use a hdmi booster and a hdmi Fiber optic
@PaulAmlin
11 ай бұрын
Walter, does the audio follow the video out with the USB C such that Ecamm Live can use it for the stream?
@binu.k.mathew562
Жыл бұрын
😊
@DaKoin
Жыл бұрын
I see that you have two audio lines going into the Atem from the rodecsster.... How is this possible cus on my rodecsster there is only one day of 1/4" audio out so where did you get the back up audio for mic 2 to go into the Atem from??
@waltjennette
Жыл бұрын
Not sure if you figured this out, but Mic 1 is Stereo and not mono. That's why it's showing "2"
@DiscoverRoanokeVA
Жыл бұрын
I have the Sony ZV e-10 and can't get it to read the HDMI from the mini pro. Is there a cord or something I am missing?
@waltjennette
Жыл бұрын
Not sure if you were able to figure this out but make sure you're putting out 1080 and not 4K from the Sony ZV-E10. Also, The 1st input on the Atem Mini can be tempermental with cameras because it was supposed to be used for Computers or Games. Quick fix is to take the HDMI cable and then switch it to another input and then you can put it back in that 1st channel.
@dustmicks1
6 ай бұрын
so the first five seconds of your video? how do you get rid of that lag/buffering issue? when i go 4k i get that issue too sometimes. how do you fix it
@waltjennette
6 ай бұрын
Can you clarify further? The first 5 seconds I was talking and there was no lag. Is that what you were referring to? Or when I switched to the multiview?
@dustmicks1
6 ай бұрын
@@waltjennette it’s not smooth footage. It’s like the the atem board does something to the footage. It happens to me all the time
@waltjennette
6 ай бұрын
@@dustmicks1 What kind of camera do you have connected? And is this from streaming or recording?
@dustmicks1
6 ай бұрын
@@waltjennette canon r6. At the start of your video it does the same thing. That’s why I notice it.
@dustmicks1
6 ай бұрын
@@waltjennette I think its something from 4k footage to 1080.
@rovonnrussell4227
Жыл бұрын
Am i able to output to a atem mini as well as an xlr studio speaker if im doing a hybrid stream event?
@waltjennette
Жыл бұрын
So the ATEM has input but not output. If you're using a mixer like me, then yes. You can run to both.
@angeloflow_23
Жыл бұрын
Hello, one question why when I connect my camera to the atem mini the black screen appears, I don't have the image from the camera? thank you so much
@waltjennette
Жыл бұрын
So, one thing I would check on your camera is your HDMI settings. Make sure it's not putting out 4K but 1080. What camera do you have?
@angeloflow_23
Жыл бұрын
@@waltjennette I solved it thank you very much
@anonymous-user
Жыл бұрын
@@angeloflow_23 Make sure to share your solution for the benefit of others. And also as a courtesy to the person you asked help to, in the first place.
@pretor706
Жыл бұрын
Hi. Can I record 4k video directly to the ssd with the atem mini pro? Not streaming, just recording.
@madedigital
Жыл бұрын
You would need the Atem mini iso
@anonymous-user
Жыл бұрын
I'm pretty sure you can record on the Mini Pro. The USB-C port has dual function. Either use to act as a webcam for the computer OR connect an external hard drive and record directly to it. Now, if it can record 4K or just 1080p, I have no idea.
Пікірлер: 72