In the late 70's the scroll saw I had used a 6 inch pin blade an I did amazing good with it I finally got a $119 Hegner copy the only blades I could get Numbers 3's 5's & 7's I used that scroll for 20 years with no problems other than routine maintenance I finally saved enough to get a Hegner Poly Max 3 that I still use today I gave my $119 scroll saw to a young man wanting to try scroll sawing an he is still using it today not as much as I used it but it's still going Great video I enjoy your channel
@WendellWoodworks
2 сағат бұрын
That’s great! Thanks for sharing and thanks for watching! 😊
@gordonsmith9263
10 ай бұрын
Just got a DW788 and was confused from all the other videos I watched about blades. You made it easy to understand. I have several types in my Amazon cart now. Thanks.
@WendellWoodworks
10 ай бұрын
Great! Thanks for watching! I hope they work out for you :)
@donnadailey5062
10 ай бұрын
Thank you for your videos, am learning much. Especially appreciate your "no-fluff" delivery method (hands not flying everywhere, straight to the point and a most lovely voice.) Talked with Miter Mike, Bear Wood, who guided me to an adapter for my scroll saw to accommodate pinless blades; plan to make wood puzzle for my grgrandson's Christmas gifts. Please keep your videos coming and maybe in one you could share about your wonderful framed artwork "This is the day The Lord has made". Love that! Thank you again and have blessed days.
@WendellWoodworks
10 ай бұрын
Aw, thank you so much, Donna! What a special gift for your grandson! I appreciate the encouragement!
@billyallmon5039
Жыл бұрын
I’ve been scrolling for over fifty years,and I am in love with pagose blades ,sharp,and stay sharp and aggressive
@WendellWoodworks
Жыл бұрын
Are these Pegas blades or something different? I love the Pegas! If something else I’ll have to look those up!
@diannmcdonald4949
2 жыл бұрын
This answered several of my blade questions. I am new to using the scroll saw so I appreciate you sharing this info. I checked your Instagram and your work is fabulous! Have a great day!
@WendellWoodworks
2 жыл бұрын
Thanks so much, Diann! And thanks for watching. Good luck with your scroll saw! I hope you enjoy it! 🙂
@JanineMKartist
5 ай бұрын
I bought ryobi . It takes both kinds. I’ll take your tip on the modified geometry ones . I am an absolute beginner. Once I take it out of the box that is.
@PSMITHjl
7 ай бұрын
Great advice, especially about the tension. I use jewelers coping saws a lot, and tension is similarly tricky. Success comes with calmness & practice. :)
@WendellWoodworks
7 ай бұрын
Thanks for watching! 🙂
@user-gz2dh3ov9o
9 ай бұрын
Flying Dutchman blades are amazing
@rolfbeuttenmuller7895
Жыл бұрын
I like your presentation, It is a common sense perspective on blades and lower end saws. You do very nice work by the way, and if one day you do upgrade to a Pegas saw, it will make your srolling much more enjoyable. I have done several scroll saw presentations over the years. The one thing regarding blades more so than the Blade number is Teeth Per Inch (TPI). As an example You can have a Pegas skip tooth 2/0 blade with 28TPI or a Pegas MGT 2/0R blade with 15.4. And to confuse the matter more some MFG are different.
@WendellWoodworks
Жыл бұрын
Thanks! That’s a good point! I’m always learning 🙂. I do use a Pegas now and love it!! Thanks for the watch!
@aminrebecca
Жыл бұрын
Thank you so much for being so informative,I’m happy to support you and have bought a few blades through your link. Thank you again!
@WendellWoodworks
Жыл бұрын
Aw great! Thanks for watching, Rebecca! Good luck!
@thepicturemandannydannytho5711
Жыл бұрын
THANK YOU SO MUCH NEW PRETTY MENTOR.
@WendellWoodworks
Жыл бұрын
Thanks for watching!
@johnduffy6546
6 ай бұрын
Great explanation
@B.A.Bassangler
Ай бұрын
Thanks for the saw advise. Sorry, buy Pegas is not in the budget, maybe if scrolling becomes more of a money-maker; time will tell. I picked up a Dewalt 20" for $150 on Marketplace...CHA-CHING! Time to watch some more tips videos.
@WendellWoodworks
Ай бұрын
Awesome! I hope you love it! 👏🏻
@danjacobsen7645
Жыл бұрын
Thank you for sharing your knowledge about scroll saw blades. Just getting started with scroll sawing and recently purchased a used dewalt 735. I’ve heard that Pegas blades are the best option. Do you agree? Subscribed and looking forward to learning more from the projects you create.
@WendellWoodworks
Жыл бұрын
Hi, Dan! Thanks for watching! I do love the Pegas blades! I’ve also had good success with Flying Dutchman brand and Olsen (although those don’t seem to last quite as long). Best of luck! 🙂
@DanoSlingz
Жыл бұрын
Love your videos! Very informative. Glad I found this channel 😎
@WendellWoodworks
Жыл бұрын
Thanks for watching! 🙂
@thegrunclechannel4681
8 ай бұрын
I have one of those Porter Cable saws and it ALWAYS jumps from side-to-side. Only been scrolling a couple of months and already am leaning toward jumping to the Pegas saw.
@WendellWoodworks
8 ай бұрын
I’m sorry you’ve had so much trouble with it! It was a good beginner saw for me, but I now know from comparison that it’s not an easy machine. I upgraded to a Pegas 2 yrs ago and couldn’t believe the difference. Very smooth/easy! If you do decide to head that route and order from Bear Wood Supply, the code WENDELLWOODWORKS will save you 5% :).
@casper1240
Жыл бұрын
Modified Geometry and reverse tooth blades seem to work best on my Axminster pro scroll saw tried Spiral blades but not very good
@WendellWoodworks
Жыл бұрын
Spiral blades are tricky! They have a place, but not my everyday go to for sure :).
@HomestyleWoodCrafts
Жыл бұрын
Nice presentation. Thank you!
@WendellWoodworks
Жыл бұрын
Thanks for watching! 🙂
@steveneugene339
2 жыл бұрын
Good info..good refresher ..
@marceloboot7535
Жыл бұрын
Please send the brand of the blades and specifications thank you.
@marceloboot7535
Жыл бұрын
Am from Manila, Philippines. Interested in the blades you are showing but we do not have here..
@WendellWoodworks
Жыл бұрын
Sorry! Not sure what’s available where you are.
@badtolz2122
Жыл бұрын
Just picked up a used 2011 excalibur ex-16 for 250 on CL. Use patience and keep cruising the For Sale ads. Something good will pop up. Don't spend a grand.
@WendellWoodworks
Жыл бұрын
Great find!
@bassmaster6190
10 ай бұрын
Will the Pegasus heads in the description work on the porter cable I have that same porter cable saw and would love to upgrade to those heads until I can get a higher end saw myself
@WendellWoodworks
10 ай бұрын
After looking into it more, unfortunately they’re only for Deltas or DeWalts right now. Hopefully they’ll make them for more models soon.
@alangeorgebarstow
7 ай бұрын
For information: there are no "Pegasus" scroll saw or blades. The name of those superior items is Pégas [pron: "Pay-gar"] and they are of Swiss origin and manufacture.
@GabiFodorrasRO
Жыл бұрын
Big like!👍👍👍👍👍✅💪Felicitări! Great video 👍👍👍😎
@luisvillarreal2516
Жыл бұрын
esa hojas no se consiguen aquí en Panamá .solo pude conseguir unas ordinarias
@WendellWoodworks
Жыл бұрын
Lo siento!
@CoconutPete
2 жыл бұрын
almost at 1k :)
@davidfarmer2049
3 ай бұрын
starts 1:50 i thiink
@fozzy19
2 жыл бұрын
Hi I have a few few questions on that up grade scroll head is it universal and I have a dinosaur of a scroll
@WendellWoodworks
2 жыл бұрын
Hi, Jonathan! Thanks for watching! Truthfully, I’m unsure. I would reach out to Pegas and ask. I’m thinking they have two different models, but I’m not sure what types they’re made for. I’ve heard good things from people who have been able to use them!
@crkolb
2 жыл бұрын
@@WendellWoodworks I checked and Pegas does not make one for Porter Cable. I have a porter cable and wish they did. I would like to know who you talked to so maybe I could follow up and see if there is a way to do an upgrade that might not be an approved one.
@robertgeorge2033
Жыл бұрын
how do I purchas blads from you ?
@WendellWoodworks
Жыл бұрын
Hi, Robert! I don’t sell blades, But I did put some links from Amazon down below in the video description :). Good luck!
@myblues6532
2 жыл бұрын
You forgot to show us how you are able to use pin less blades on a scroll saw that comes with pin blades.
@WendellWoodworks
2 жыл бұрын
Hi! At 2:54 I talk about how to put in and keep pinless blades from slipping!
@jungsomewhat
Жыл бұрын
Dont you need an adapter ive got no screw to tighten just a groove for the pin ..thank you.
@nperson
Жыл бұрын
@@jungsomewhat The lower priced saws can't use pinless blades without installing an adaptor. She should have explained this.
@fethallahmessaoudi1019
2 жыл бұрын
Nice machine 😍😍👍👍 my machine is "HEGNER"
@pankogmondal9948
2 жыл бұрын
এই মেসিনের দাম কত
@WendellWoodworks
2 жыл бұрын
I can’t find a way to translate…but thanks for watching! 🙂
@jayantomondal5497
Жыл бұрын
Scroll saw bladesसार आपका मैवाइल नंबर आस्टिन पर देदिजिय़ सार आप मुझे वेलेट चहिय़
Пікірлер: 60