If you’ve got a Z-wave hub in your home this lock is a great bang for your buck and very reliable. I like your tests
@baudneo
2 ай бұрын
What controller are you using and how did you include the lock? I've spent 5 days trying to add this lock to my brand new controller without luck.
@karmasuture1
Жыл бұрын
Great content but that beeping transition noise is unbelievably annoying you need a different one
@DIYSmartHomeGuy1
Жыл бұрын
good feedback. Thanks!
@BudsSmartHome
Жыл бұрын
Good video John. Thumbs up!
@DIYSmartHomeGuy1
Жыл бұрын
Many thanks!
@zackpercellvo7923
Жыл бұрын
Just ordered 2 Venetian Bronze on Prime Day for $89ea! Can't wait to get them going.
@DIYSmartHomeGuy1
Жыл бұрын
Awesome! Thanks for the feedback!
@Dazdigo
7 ай бұрын
I wish these deadbolts used 18650s, they are rechargeable, cheap and will last a lot longer than 4 AA.
@DIYSmartHomeGuy1
7 ай бұрын
Yeah, still a way to go on the "power-friendly" side of these locks.
@RedMarsupial
6 ай бұрын
Fully compatible with Ring Alarm base station?
@dankelley9361
Жыл бұрын
I think a great addition would be to include install & a SmartThings review.
@DIYSmartHomeGuy1
Жыл бұрын
thanks for the input. It's much appreciated.
@jerrycrocker5732
5 ай бұрын
I use this with Home Assistant and cannot get it to report its locked/unlocked state. Either if its changed manually or via zwave it never reports its state back. Any idea if there is a specific parameter for this? it seemingly worked for a few days then just always says unlocked or unavailable for its state. Has no issue receiving zwave commands to trigger the lock so i know the network isn't at fault here.
@mamagkchannel7690
Жыл бұрын
I❤your VDO🎉
@DIYSmartHomeGuy1
Жыл бұрын
Thank you very much Mama GK! I love your cooking videos!
@ShaneS071
Жыл бұрын
been looking for a outdoor z-wave or zigbee door lock with finger print reader and auto lock feature, any advice
@DIYSmartHomeGuy1
Жыл бұрын
Working on it!
@HeatherDerieux21
6 ай бұрын
Were you able to find this criteria?
@ShaneS071
6 ай бұрын
@@HeatherDerieux21 I used a Pine World Pro lock system , and just bought a ULTRALOQ World's First Z-Wave Smart Lock with Fingerprint ID to replace that when it goes bad
@alanoldaker563
Жыл бұрын
Is there a way in Hubitat to get alerted for the jam?
@DIYSmartHomeGuy1
Жыл бұрын
Not to my knowledge. you can always close a virtual lock at the same time and then compare the two after a new seconds to minutes. Will for sure tell you if they don't match, but not specifically the reason.
@seanschops3172
Жыл бұрын
On clearance right now at lowes for $74.
@DIYSmartHomeGuy1
Жыл бұрын
Great price for a great lock!
@ypark2877
Жыл бұрын
The very New Smarthings station no zwave?
@DIYSmartHomeGuy1
Жыл бұрын
My understanding is that the SmartThings Station (as opposed to the SmartThings Hub) does not have a Z-Wave radio. If you want the Z-Wave and you want to stick with SmartThings, you'll need the SmartThings Hub (which is built by Aeotec)
@PricklyGuyCreations
Жыл бұрын
Can this be used with hubitat to see whos key code was entered? ex. 1234 is john "John unlocked door" or 5678 is Jack "Jack unlocked the door"
@DIYSmartHomeGuy1
Жыл бұрын
Yes it can
@vijaypeachi
4 ай бұрын
Nice video. My Bluetooth pairing is not working. Do you have a video for that ?
@davidrobinson2515
9 ай бұрын
Can’t get this to work with Samsung SmartThings v3 hub. Is that because it is zwave 700?
@DIYSmartHomeGuy1
8 ай бұрын
Not sure. Check the SmartThings community. They may have more experience on the issue. Sorry I can' help more.
@DejaGruvBand
Жыл бұрын
What app works with this lock?
@DIYSmartHomeGuy1
Жыл бұрын
It's a Z-Wave lock so it needs a Z-Wave hub. Whichever one you pick will have an app.
@DejaGruvBand
Жыл бұрын
@@DIYSmartHomeGuy1 It is and I don’t have a z wave hub
@baudneo
2 ай бұрын
This device is trash. It refuses to pair with my zwave network "S2 bootstrapping failed: secure inclusion timout elapsed." Going on day 5 of trying to add 2 of these locks to a brand new zwave controller on home assistant and z wave js ui. Z wave is garbage.
Пікірлер: 37