As a "veteran pilot" i really appreciate these long in depth formats. As you have seen i usually have complicated questions that i cant find an answer to any where else. You're the best man, keep the train rolling!!! 🛫🤘👍🛬
@RobertTheFriscoSchmid
5 жыл бұрын
I sooo appreciate the work you do, for all of us. THANKS for doing what you do!!!!!
@sunsetpark_fpv
4 жыл бұрын
At 38:52 you refer to the PID tuning masterclass vid still being true, with this "extra layer". Sums up my journey to this video! I shut off all those extra layers and now I'm trying to understand their contribution to the overall performance of the quad. Turning them on, one by one, from basic PID setup to Antigravity on, to Iterm relax and rotation, to feedforward settings- I have followed your vids through this entire process, and yes, I have learned MANY things over many days, and thank you so much for everything that you contribute to this hobby Joshua Bardwell!
@TheJergoswiler
4 жыл бұрын
Hey Bardwell. You are BY FAR the cooles not cool looking guy I know. Thanks for being like this and for all the things I learned from you over the years!
@JasonRidesmoto
5 жыл бұрын
24:20-25:20... you had a a ton of confidence in the quad and were truly feeling it! That's what modern day tuning is all about! My quad can fly good but I know it's tuned when I have more confidence flying it and it shows in the flying...
@Healwave94
5 жыл бұрын
Disabling those 2 filters made my quad so smooth in corners like never before!
@timothyciarlette8250
5 жыл бұрын
That was outstanding Josh, loved it, I am liking BF 4.0.2 (Formula 402) very stinking much. Please wish the Mother of your children a Happy Mothers Day, and for You a Happy New Baby Day. Thank you Josh for all you do.
@mikeallenfpv
4 жыл бұрын
I just disabled the 2 initial filters you spoke about and holy shit what a difference with prop wash! Motors barely warm too. Thanks Josh!
@d3c0deFPV
5 жыл бұрын
That quad sounds/looks great. I've been trusting in the defaults + tuning guide and getting good results. Since it feels so much like a sim I feel quite a home, and I just fly around the robotic feel like I would in something like Velocidrone. Feed forward seems a lot like mouse acceleration on a computer, and much like that, preference will vary greatly. I don't think there's a best setting for everyone, but the devs are doing a good job at finding a middle ground to start with.
@audaxxx4202
5 жыл бұрын
I was thinking that about mouse acceleration and gaming. I've definitely come to prefer low FF values as I like a more linear feel to the movements and a predictable rotation speed.
@jlarson42
5 жыл бұрын
Very helpful. I learned a lot. My son in law and I both just built our first 5" freestyle quads just in time for your videos. Thanks Joshua 👍💖🤓
@bizmar
5 жыл бұрын
At 24:00 0.2 - 0.3 FF transition should remove the bounces that a over active FF is causing. These get worse if you have dead band set, as the movement trough center will not be smooth, and FF amplifies big changes that happen vary fast, like the D term. There appears to be a lot of misunderstanding of how FF transition works (and old Setpoint transition). It attenuates FF in the % range away from center. For example: 0.2 works from center to 30% stick deflection. FF is 100% suppressed when the sticks are centered, and the suppression is gradually faded until 30% deflection. So it's like a TPA for FF, if that helps. 😜 FF transition does not apply when returning back from max stick at all.
@fastfrank61
5 жыл бұрын
You have seen the Vidio from Mark FF 450 on P R and 100 on YAW i flay this PIDs and Filtering and it goes like a devil :-))))) and item on Gyro 11 for freestyle and Racing Setpoint cutoff on 20 and Absolut control on 5 Diatone GT 548 MK3 4S Tattu V3 2000mph 120C . Best regards from Spain ;-))))
@bizmar
5 жыл бұрын
@@fastfrank61 What video? (there's some upcoming stuff that will allow you to crank up FF without severe bounce back, but it's not in 4.0.2)
@fastfrank61
5 жыл бұрын
@@bizmar Look the vidios from UAV TECH and you will find tt an the Filtering all out ,resoult is propwash 0 . I flay 2 Diatone GT 548 MK3 4S wit Tattu V3 4S 2000mph 120C in one with Gefam 51449 and Freestyle and the otfer one with Racing Gefam 5043 Settings and the 2 going like DEVILS :-)))))))
@fastfrank61
5 жыл бұрын
@@bizmar kzitem.info/news/bejne/0KComZt5nIyVqII then look this please 450 on Roll and Pitch :-))))))
@streetzfpv
5 жыл бұрын
Omg. Wow.. That was some of the best propwash handling I've saw. Usually u get some or you smoke motors. Didnt want 4.0 but I want that.
@rzijl68
4 жыл бұрын
This last battery was awesome. That is one amazingly good flying quad :)
@rensnieuwenhuis2524
5 жыл бұрын
MY MAN!!! I watched it, did some tweaking and... OM-fucking-G, my quad flies like feather through the sky, thanks for sharing all your awesome knowledge
@shainterry
5 жыл бұрын
Really enjoy your videos. Such a chill setting to learn. On the porch trees in the background and the bird chirping.
@WilkieaSt
5 жыл бұрын
Delivery van bringing more quads at 25:25 haha. Awesome flying and another wicked helpful video. Thankyou
@bfgfpv8471
5 жыл бұрын
Being new to the hobby, watching a ton of video's about tuning quads I must say this is exactly what i was looking for! Especially since the first Betaflight version i got to fly was 3.5 and just got to learn to fly, being the Nerd I am, couldn't resist to immediately upgrade to 4.0.0, 4.0.1 and 5 days later 4.0.2, trying also to get rpm filtering going with bi directional dshot (sadly my FC isnt working without the dshot_burst off) I needed these pointers to get a good strategy on how to approach tuning in 4.0! Thanks to you Joshua I can go into the field this weekend, get my newly build quad in the air, notes out and tune it!
@PIDtoolbox
5 жыл бұрын
nice tuning video! Minor point I'd like to mention, but I am a little surprised no one is pointing out the overall vibes and jello (and I absolutely mean no disrespect, Im just trying to be open and honest). Maybe it's just a prop/motor imbalance issue, but I suppose this is not what this video is about. If there are no mechanical issues, I am always curious how filtering and tuning parameters act to help or hinder this (I'd really like to see more exploration of this issue (and I follow the BF devs on slack, and I know the common arguments and proposed solutions, tricks with ND filters, etc), but I occasionally come across some quads that look perfect on paper (with clear filtered spectrograms) and still have this issue. I'm sure Im not the only one who finds this to be a major topic in and of itself, and to my knowledge, we still don't completely understand it. I love to see a case where proper filtering just kills such vibes, but it's never that cut and dried (please someone prove me wrong with some data). In fact, I developed a piece of software (pidtoolbox) with this issue in mind, even more so than propwash, because to me propwash can largely be controlled by the pilot, but general vibes are completely out of our control. anyway, thanks again for the great video!
@kwadrophenia5961
5 жыл бұрын
You can see the wobble/Bobble during FFF with the initial runs. It is gone after lowering the relax cutoff to 10 or 15. Can’t remember which. Didn’t see it in final flight although I am on phone with small screen.
@maridkamuju9316
3 жыл бұрын
I stuck around till the end and know more because of it.
@biglouinorlando
5 жыл бұрын
Interesting stuff there, thank you for taking the time to look under the hood and helping out it in lay terms for us real word hobbyist that don't have the time to just spend an afternoon trying out all the settings. You have at least given me a starting point and a blue print to follow. Thanks again.
@DingDongDrift
5 жыл бұрын
i have scalding hot motors after 30 seconds on a 6S 6" quad with your FC and 4 in 1 and 1750kv 2207.5 motors with HQ 6x3x3 V1S props, any idea why? i have turned my PIDs down by a factor of 3 like the notes say and it's still completely untouchable.
@JoshuaBardwell
5 жыл бұрын
kzitem.info/news/bejne/xqVo2Z6Kh4Vho5g
@DingDongDrift
5 жыл бұрын
@@JoshuaBardwell that doesn't help at all lol. fuck betaflight 4, i'm going back to 3.5. also does your ESC have an analog voltage and current sensor? the ESC telemetry coming out of it is like a solid 2 volts off and reads like 2 Amps lol.
@MaxBeamer
5 жыл бұрын
really unique setup and frame it’s like a mix of race and freestyle but then again that’s kind of how 4.0 tuning feel is!
@sholaxfpv
5 жыл бұрын
Max Beamer 🔥
@TorbanDallas
5 жыл бұрын
nice video as always! I have also tried all different ways of tuning BF4.0. And my tuning was not only about the feeling, I also wanted a smooth HD Footage, but what ever I have tried i couldn't get rid of oscillations and vibrations in the Footage. And to be honest, your HD Footage looks very shaky too. I have also gone back to BF 3.5.7 and it was getting a little better. Finally, i have replaced my F7 Flight Controller and installed a Helio Spring V2 and it feels much better, flys better ( subjectively ) and the vibrations in the HD Footage are gone. So the IMUF Filtering is still superior to Betafight Filtering. It would be nice if you could get rid of the vibrations in the HD Footage with your tuning experiences. Sometimes I think, Betaflight Dev's and most of the users are only care about feeling but don't care about smooth flight Footage. Now with ND Filters and Hypersmooth cheatings, it's getting less important. But I still like recording smooth flight Footage on 60FPS without ND Filters and without stabilization.
@chrswnd
5 жыл бұрын
Torban Dallas yup, video was quite shaky, wondered why JB didn’t look into that at the same time
@fpvskirc8371
5 жыл бұрын
I have the same issue! Was pulling my hair out trying to get it the way I like it! Swapped out the fc thinking it was a bad giro!
@propgear123
5 жыл бұрын
Hmm I just changes to 4.0 and it was all stock and I was getting this weird stutter jumping at points. Is this what you guys are describing? I am watching this vid now and will comment again lol
@cwtim
5 жыл бұрын
same here, thought it was my GoPro session. But i'm starting to think this has to do with BF4.0. Cannot use my recordings lately because everything has the worst jello vibrations. The quad sounds pretty good though.
@fpvskirc8371
5 жыл бұрын
@@cwtim I flashed it to 4.03 and looks a bit better still not perfect tho!
@johndextersantos9541
2 жыл бұрын
3:39 i thought you said "just put the sky in the air" 🤣 . . .I am not a native english speaker, my ears aren't tuned well for english. this cracked me up so much I will never forget it. . lol
@Jord0699
5 жыл бұрын
I’m on the ride now. Never mind relearning. Always will learn something new.
@AdrianoCasemiro
5 жыл бұрын
A lot to unpack here. Definitely not an easy video to learn something today. However, there's a lot to explore in Betaflight 4. Thanks for your advice again, I think I'm ready to take the next step and upgrade to 4.0.2. And start playing with this new and exciting layer of PID tuning and gyro filtering.
@Miichi005
5 жыл бұрын
Im new to the quad hobby but getting sucked in quick. Im so confused with pid tuning, but your videos are a great help.
@helidreamsfpv3263
5 жыл бұрын
Thanks Joshua for your videos! I think that every time Betaflight becomes a little complicated adding things that definitely improve the flight, but complicate the adjustment. We will have to study more to understand so many complex parameters. Greetings from Mexico City !
@i4dat
5 жыл бұрын
Great Video Joshua, thanks for sharing so in-depth of a video! Now I need to upgrade my quads to BF 4.0.2 Side note: I'm already one of your Patreon sponsors and to be honest, its always money well spent! Thank you for all that you do for us fellow pilots.
@Stanton_High
5 жыл бұрын
I've been starting with the gyro filter using a dynamic and one notch on the peak, then tuning the D filter to chop out oscillation propwash frequencies, only then I mess with pids for the stick feel, then a final blackbox for some final adjustments. You can repeat this cycle for years and never fully explore the possibilities that 4.0 has. It's amazing
@Gs3xRfun
5 жыл бұрын
then you find out you get reverse drive on the motor when the tx drop packets then feedforward goes nuts. fix will be in BF4.1
@gregdeon705
5 жыл бұрын
Great vid , again . I installed 4.0 on a new 3 inch quad never had nothing on it before , whoa berserker mode , looked at the CLI and had errors in several spots , So i tried 3.7 flew no problems . A couple of days later 4.0.1 came out , installed 4.0.1 and been flying it since . Will try 4.0.2 maybe , probably , when i get around to it .
@bizmar
5 жыл бұрын
4.0.2 fixed a few F3 boards that were misconfigured in 4.0.1, and adds support for some new FCs. No flight performance changes. In general, 4.0.X changes are only bug fixes, with the filter update being an exception because of urgency. 👋
@jpbatinic
5 жыл бұрын
Tuning on worn props is a really good idea, I dig it
@marinehm
5 жыл бұрын
I need to keep playing with it. One of my followers have the same RS1606 4000kv motors by Emax. Said he was going to contact you about HOT motors. I’m waiting for my VTX so I can really fly and play with the settings. Can’t fly LOS to save my life!
@amen_ra6926
2 жыл бұрын
Hmmm...at about 22:12 you upped Feedfoward to 200, 200, & 100. Then at 26:08 Feedfoward was down at 70, 75, & 0. What did I miss? What happened to the previous settings when they jacked way up?
@FPVecinos
5 жыл бұрын
Hi!! great job but I have a little problem.. I upgrade to BF4 and I'am using the default setup for the PID.. now my batteries of 4S have a life time o 40% less.. before in 3.5 9 to 10 min, now 5-6 mins.. what I should be change for improve that battery life?
@felixreyes26
4 жыл бұрын
I really really need your help. I did everything on the video step by step, but I am having trouble with the FrSky R-XSR. Not sure if it’s the wires or the ports on beta flight I have been stuck for almost 4 hours now. H7 Extreme Build
@rcpete7055
4 жыл бұрын
Just fried my VTX 5848 lite and I don't know why?? I wired it all correctly and checked twice? Luckily I unplugged it in time to save the quad.. It still flies fine😊 there was a puff of smoke and that smell we all know.. Ideas guys??
@DanRichmondFPV
5 жыл бұрын
Quote of the day... 'relax more aggressively'
@dirkmyers9375
4 жыл бұрын
i have watched this video probably 3 times. along with my quad plugged into beta flight. has anyone else noticed that changes are made to the PID's between takes?
@popduce1024
5 жыл бұрын
I really appreciate your teachings. I learn from you everyday!!! Thank you so much JB.
@theflyinggreek6329
5 жыл бұрын
My hero! I was trying to figure out what to change for some gnarly bounce back,! Thank you JB!
@ruellerz
5 жыл бұрын
First: I dont have the time to know what every little setting does. I need a spreadsheet or something. Second: I don't know if the settings matter more or if its the actual skill of the flyer which dictates performance. Lasty: I just rebuilt my Armattan rooster with a 900Mhz RX and upgraded to Betaflight 4.x. I copied and pasted your PIDs @39:54. Good enough lol
@MrJarrod
5 жыл бұрын
Thanks so much JB ,for your work on this video . Going to try this out Saturday.
@MrSutekii
5 жыл бұрын
Whats the story with the camera jello? Not a tune related thing but the GoPro mount?
@wingsfpv6987
5 жыл бұрын
Maybe try RPM filtering if you’re feeling adventurous. They should help with MTOs and basically get rid of 95% of visible prop wash in HD. I did try that setup for a couple of weeks but ended up going back to Kiss.
@pontiacdriver999
5 жыл бұрын
So total newbie question here, but if I update my version of Betaflight on my FC to this newest version, all of my current tunes will be gone right? I ask because I bought my quad second hand and a lot of tuning had gone into it. I'm still learning to fly these fast and will mainly be using it for racing as I'm not really interested in freestyle flight.
@HelloDroneRC
5 жыл бұрын
Thanks Joshua for a lot of work in PID tuning! I am looking for an answer to my problem: BF 4.0.4, D_min 22/25, D 25/28 and I still have hot engines after the flight ... Below I can not go down with the value of D - drone then has huge propwash and wobble. Everything is completely new, i.e. Engines, propellers, etc. The engines are RCX NK2207 2400KV. I'm afraid that during the summer heat I will burn them ... Can you help something? I think something is wrong with the filter settings in Betaflight (filters have default values). Drone built for freestyle ...
@MrScottyskillz
5 жыл бұрын
Im having the same issue. just built my first quad and flashed 4.0.3 and first flight was horrible. I couldn't go higher than maybe 40% throttle the oscillations were so bad. So after like a 1 minute flight my battery was almost drained and motors were pretty warm/ almost hot. I moved D-gain down to 10 or 15 and that helped alot but motors are still getting extremely warm.
@MCsCreations
5 жыл бұрын
Fantastic, Joshua! Thanks a lot! 😃 Anyway, I think you should try setting to gyro. Who knows, even if you don't like it, the test would be really valuable for us. 😊
@d3c0deFPV
5 жыл бұрын
I agree MC! I use setpoint on my race quad and gyro on my freestyle as suggested, but I can't compare the two since they're completely different. Some data like blackbox logs from the same quad would be cool to look at.
Great video I'm learning and building my first 220 and looking forward for this kind of videos. Thank u.
@mike1why
5 жыл бұрын
It's so hard to tell sometimes, JB, when you're just emoting for dramatic effect from genuine surprise and delight. That's not a criticism, but an observation of your delivery style. Anyway, I think you seemed genuinely pleased with the tune you ended with. It showed in how you flung it about. That's a pilot happy with how his aircraft feels. Looking forward to doing the update on mine. Thanks for the video.
@JoshuaBardwell
5 жыл бұрын
Everything you see is totally sincere. IDK what to say....
@princesfpvdrones
4 жыл бұрын
wow, so in depth, thank you soooo VERY much, now you like something challenging? Try you hand with tuning 7" quads...no one likes tuning or attempting to tune them, are you an exception?
@brokemechanicfpv1420
5 жыл бұрын
One of my quads flys really robotic on 4.0. Thanks JB I'll sit down with this and see how she goes this weekend
@FireDFPV
5 жыл бұрын
So if I want sharper instant response from swithching stick pace from slow to fast and vice versa like what @Alexandrecoquoz does, what to do? Crisp change of direction and fast-slow rythm.
@nguyenthanhnam8824
4 жыл бұрын
Hello, I don't know what I did wrong after the update, my engine can't try it anymore and the armed is locked Arming deaktivert MSP what should I do?
@jtroutt19
5 жыл бұрын
I think it speaks volume given that you dont ever really mess with PIDs. You change the features that affect the stock pids
@JoshuaBardwell
5 жыл бұрын
I did adjust the D gains :-) The truth is that the stock PIDs are "right" for most situations, at least if you're running a typical 5" quad like the devs tend to tune on.
@jtroutt19
5 жыл бұрын
@@JoshuaBardwell I know you do but just barely, and I personally didnt notice a difference. Im sure you did on the sticks of course. Compared to a couple years ago its amazing.
@RimmyTimfpv
5 жыл бұрын
Great video. I really need more help with filters, and this helped get me a little further towards understanding what feature does what. And tuning for flight feel really is just as important as tuning for smoothness/bounceback/propwash/etc.
@soli3605
5 жыл бұрын
Another great video, love to sit down after work and get ready to learn. Could totally watch you just fly around all day, love your style! Can't wait to try this out on my quad and see how it feels (Not sure it will really help as it's a power whoop 85/75x 2s Frankenstein .... Happy Flying Mr Bardwell! Can't wait to see what you'll teach us next!
@aroncarrier9583
4 жыл бұрын
any ideas on why my sp racing f3 board ( I know its not new) wont save the option for i term relax? I enable it, but when refreshed it is disabled. Possibly eeprom is full? f3 board not supporting I term relax? I am also using BF 4.0.6
@imager09tube
5 жыл бұрын
A little intro on your quad build say cam angle batt frame and propellers Will help ! Thanks
@caseydimmitt2449
5 жыл бұрын
Hi Josh. Thanks for this video. Its helped with most of my quads playing with these settings as described. I am having trouble with a sub 250gram 5" tune. It has a weird ever present boble under forward flight. If it's in a turn or making a move, it's either imperceptible or it's gone. I made all these adjustments to filters with zero impact. Next, I dumped all the pods by half. Stick feel changed but it still bobbles. Should I be boosting I term for pitch and roll instead of cutting it?
@lucavirzi2083
5 жыл бұрын
Salve Joshua, come posso togliere quel fastidioso rimbalzo dopo un roll oppure un picht, adesso lo correggo solo accompagnando lo stick. Ciao e grazie
@0001bensherman
5 жыл бұрын
off subject. still kinda PID tuning tho.. if i have put my motors on back to fromt can you change them in BL Heli??
@brandonwoodford579
5 жыл бұрын
Hey Joshua, what do you have the filters set at for the rest of the flights? both off?
@AbhiWeltig
5 жыл бұрын
Hey Joshua, I am running bf 4.0.5 and when I flip I get insane bounce back. My pids are stock and I am running low pitch props. (S3) What is the issue and how could I fix it? Thanks
@JoshuaBardwell
5 жыл бұрын
You could adjust iterm_relax and see if that helps. Otherwise, you would have to adjust P and D like usual. But for BF 4.0 specifically, iterm_ relax is the new feature most likely to relate to bounceback.
@janpenner2002
5 жыл бұрын
Great Video! i think Betaflight should just offer different default settings for freestyle and racing...
@chris-jones
5 жыл бұрын
Brilliant video! Can you repeat this using a three inch quad? I’m having issues getting mine locked in and don’t know which way to go. I’ve tried the devs recommended settings for 3” but it still doesn’t feel right and I’d love to see your approach.
@pistonpoweruk
5 жыл бұрын
look like you still have mid throttle bobble, i have this in 4.02 and can't get rid of it?
@danielemstudios
5 жыл бұрын
that tune look pretty damn good in the end there. It looked like you had a lot of authority over movement!
@PinchTune
5 жыл бұрын
Yaaaaaaas! Hyperlow. That's what I fly the most!
@Gs3xRfun
5 жыл бұрын
Really liked how my vert racer flew but I crash a lot. With the battery on the top, I could only afford to lose so much pack.
@PinchTune
5 жыл бұрын
@@Gs3xRfun Yeah, for racing, battery on top tends to break more packs. Cause that's the first thing that hits. But apart from a few Hyperlow RS racers I'm flying RS+ for freestyle. Just recently I built a 5S and a 6S freestylers.
@duckslave
5 жыл бұрын
Marvelous and thorough video!!!
@tripplewhipper
5 жыл бұрын
Thanks I really appreciate the knowledge especially as this is all pre first build research to kind of understand as much as I can before I get into the meat of it all
@billyd78
4 жыл бұрын
Have you ever tried a hard belly land onto the trampoline and the perhaps a few flips on exit and back into flight?
@Tavdog
5 жыл бұрын
Noice. Now that I know what twiddle with I'm excited to do an afternoon tune sesh on my freestyle quad.
@zeussdog1708
5 жыл бұрын
Thanks Josh great information, well worth watching.
@damienkrohse3374
5 жыл бұрын
Do you have any recommendations for PID's on these micros running the 65mm props like the Toothpick?
@jyunte
5 жыл бұрын
Did I miss something? One moment you raised FF to 150, then next flight it was back down to 70-something and you raised it to 100 at the end of the flight, saying more than 100 could cause issues.
@desidudes78
5 жыл бұрын
Thanks for the video. My question is: Why can't you change rates, super rate, expo via smart audio? Is this feature available and I just don't know about it?
@JoshuaBardwell
5 жыл бұрын
SmartAudio is used to allow the FC to control the vTX power, channel, and other such parameters. So I think you mean to be asking something else. You can change rates, super rate, expo, via Lua script and Betaflight OSD.
@coconutfpv
5 жыл бұрын
Ok, this is good. Now i hope we're gonna learn how to get rid of that persistent jello 4.0 itroduced. Speaking bout all those throttle changes and forward flight , making punchouts and cruising looks like garbage.
@bizmar
5 жыл бұрын
With D_min BF has to "sense" propwash before it starts raising D, and that is controlled by D_min Gain, 27 is a conservative number because if the quad is shaking from too little filtering, D will get boosted, and make it worse. So, if your quad is flying well, turn Gain up to 35, and that will make it a little bit better. BF 4.0 tuning notes have a very complete guide for taming prop-wash, from what settings to try, to how to fly around it. Very much recommend reading that, even if your aren't on 4.0 or are running dRonin. 😁
@fastfrank61
5 жыл бұрын
All this you cann seeall vidiods o Joshua friend Mark Spatz UAV TECH I fly it 45 and D max 55 and 50 and min 30 and 35 :-))))))
@juliansieber4960
5 жыл бұрын
Hey Joshua, I got the SPRacingF3 flightcontroller and recently flashed to 4.0 and now 4.0.2. And what should I say, it flies better than ever, even without a special tune. I know that the devs had to cut some features to make 4.0 run on F3 boards, where can I look up, what exactly was removed? I already found out that I can't configure my LED-strip (although it seems to run some kind of default profile, which is fine) and I tearm relax seems to not work as well. But is there a full list, which board can do what, so I don't have to try out all the functions one by one? Greetings from Germany :)
@chrisconner8629
5 жыл бұрын
Did you get the standard or deluxe?
@juliansieber4960
5 жыл бұрын
@@chrisconner8629 I have the acro version without compass
@NilsAstrologo
5 жыл бұрын
I’m i wrong or I can see midthrottle oscillations?
@fastfrank61
5 жыл бұрын
I have seen it to :-)))))))
@DeanChapmanFPV
5 жыл бұрын
Joshua that last pack was epic 💥🔥
@Totokoi1
5 жыл бұрын
May I ask for some proximity flying, if you have time? Perhaps on one of your 2207 builds? Thank you joshua, I always appreciate your input
@alfadex50
5 жыл бұрын
i am really wondering how you don't get sick with all those flip & rolls , i indeed cannot be used ti this but i like to watch you, for as long time i can handle
@outcastfpv7655
5 жыл бұрын
Locked in feel seems to make you fly better Joshua , Looks better. Just my visual preference. This video was very helpful thank you. Quick question... if I flash your JB flight controller will I lose the calibrated Mah ? I just got 2 of them. I really want the ma drawn feature in my feed.
@JoshuaBardwell
5 жыл бұрын
You can always note the calibrated mAh value and copy it to the new firmware version.
@outcastfpv7655
5 жыл бұрын
@@JoshuaBardwell Thanks I appreciate the help.
@marinehm
4 жыл бұрын
Have you tried setting Item relax to Gyro instead of Setpoint?
@ronnyrengkung7894
5 жыл бұрын
Always Love your Tune Video... Joshua..! Thanks.!!
@argyleskyfpv461
5 жыл бұрын
I am currently tuning my 6s freestyle kwad on 4.0.0. Will tuning with a battery that weighs 176 grams and the other battery weighing 212 grams give me differant results when i switch from one to the other?
@Gs3xRfun
5 жыл бұрын
might be negligible difference but there is difference. mass and inertia.
@jcard904
5 жыл бұрын
The knowledge is unending
@doom3crazy
5 жыл бұрын
I remember in a previous video you mentioned you couldn't decide if you liked 3.5.7 more than the new 4.0 :::: Has that changed? I am currently on 3.5.7 and have been a little weary of upgrading to BF 4
@Hazzmat321
5 жыл бұрын
Same, on 4.0 my quad just flipped on launch. 3.5.7 = just fine..
@swugger
5 жыл бұрын
Will use this video for my new quad
@falk_fpv
5 жыл бұрын
Hey, For Race FW 0 / 0 / 0 and ITERM RELAX = 100For Freestyle FW 200 / 200 / 200 and ITERM RELAX = 0????????
@michelrinaldi5458
5 жыл бұрын
Hi Joshua, interesting tutorial. I test iterm relax with gyro and setpoint. With setpoint I have very little bounce back after fast roll and pitch. With gyro I have big bouceback. How can I reduce this behavior? Thanks
@JoshuaBardwell
5 жыл бұрын
Go back to setpoint? Haha I kid. Change the iterm relax threshold to see if that helps.
@wonkastudio-johnny
3 жыл бұрын
anything to do for Yaw stutter ? i mean it stutters so much that the quad rotates to the right !! any hints ?
@Brendjord
5 жыл бұрын
i am brand new to the "drone game". got two drones (TBS oblivion and Emax Hawk 5), and waiting for batteries to show up in the mail so i can start flying. been training in Liftoff all winter and can wait to try and fly for real:) I have watched your videos about BF, and also played around in it to trying to learn it (still have a looooong way to go). Quick question: for a newcomer like me, who are about to take his first flights with a drone, do you recommend setting up BF like you do in this video, or start with stock PID´s? my goal is to fly freestyle btw, and my go-to drone in the beginning will be the oblivion.
@TheSpicha
5 жыл бұрын
Great beginner quads, you will love both. You shouldn’t mess around with PIDs stuff for now though if your quad flies fine (which it most certainly will with stock Betaflight PIDs). Fly consistent rates, have fun and you will have a great start 😉 btw I definitely would suggest keeping the Hawk 5 completely stock like it came from the factory. Emax PIDs are unreal, it’s the only quad I own that still has complete factory settings.
@Brendjord
5 жыл бұрын
@@TheSpicha thanks for the advice 👌 got some batteries arriving by mail shortly, just waiting for the rain to stop before I get to fly 🤘
@NordicBlueRC
5 жыл бұрын
Josh, another great video, thanks for this. I'll, be certain to test these out over the weekend. Also, I just wrapped up a 3" build, on an H frame, and I am feeling slidy when turning. Should I mess with the P or the D gains on roll and or yaw to gain some more control?
@JoshuaBardwell
5 жыл бұрын
Raise yaw FF
@NordicBlueRC
5 жыл бұрын
@@JoshuaBardwell thanks!
@gadgetfriendly363
5 жыл бұрын
Not seeing the d min settings in the BF 4.0.3 was it removed or does it need to be enabled in the cli or gui somewhere?
@JoshuaBardwell
5 жыл бұрын
If you have an F3 flight controller, that feature does not fit into the flash space and has been left out.
@gadgetfriendly363
5 жыл бұрын
@@JoshuaBardwell Actually seeing this with a Kakute F7.
@Federico_F.
5 жыл бұрын
Good job JB, u make a guide Aldo for 7"? Or u can tell us the best tuning for long range?
@markpfeifer1402
5 жыл бұрын
Go to the github betaflight 4.0 tuning notes and cut and paste the large quad settings into your CLI.
@markpfeifer1402
5 жыл бұрын
Go to the github betaflight 4.0 tuning notes and cut and paste the large quad settings into your CLI.
@zanpekosak2383
4 жыл бұрын
I noticed the stiffness immediatly when I tried to fly round a tree and managed to do a 180 yaw and exit the turn the same place I entered it. It was a big suprise to me when that happened especially on my crappy 30m range VTX where I can barely see a tree in front of me. I thought I missed it at first XD.
@chemistt
5 жыл бұрын
7:46 - I wonder if this happened to everybody that was trying out BF 4.0 :D it happened to me too and I felt like a stupid noob....now I feel ok seeing that it happened to Joshua too :)
Пікірлер: 342