I don't know if it's been said, but since project blue falcon went AWOL you are the best consolidated knowledge base we have left. thank you for putting this together, as always, your content is on point. I would argue you are one of the reasons this community grows as fast as it can.
@Hohmies86
7 жыл бұрын
Kwad Skwad he's back and spittin out videos at a rapid rate
@floorpizza8074
7 жыл бұрын
Sadly, Project Blue Falcon was in a terrible motorcycle accident last week. He did not survive. :( Rest in Peace.
@scubasteve3508
7 жыл бұрын
floorpizza what really. How sad.
@unmaskedpoet
6 жыл бұрын
I have an xrotor f4 fc the one that plugs in to the 4 in 1 I was able to connect until I flashed the new betaflight 3.0. I can flash any version with out problem but now it won’t connect to let me in I have racked my brain any advice would be greatly appreciated
@WackFPV
6 жыл бұрын
Project Blue Falcon didn't go AWOL, he died. Show some respect bruh!
@martinarial3691
2 жыл бұрын
I've found the answer to my problem in this very video, 5 years later. Thanks a lot Joshua Bardwell. Keep them coming!
@theschmidy
7 жыл бұрын
Joshua! Thank you so much for your videos. I can't say it enough. You're the only reason I've been able to enjoy flying. I've referenced this video for several quads at this point. Much love and respect! Thanks again!
@willyburger
7 жыл бұрын
This is probably the simplest and most logical driver explanation I've seen yet.
@jimmychan4372
7 жыл бұрын
I just watched this video to set up the Wizard and I'm lost I downloaded the drivers at connected the drone but nothing
@peterlenswood2264
7 жыл бұрын
Brilliant! This process is so confusing for a noob and even intermediates and until now I haven't found any other explanation as concise and helpful as this. Please keep up the quality work. Thanks Josh
@Hoggdoc1946
5 жыл бұрын
This is great if you have a window computer. For those of use with MACS this doesn't apply beyond loading the CP210x Drivers. I'm still not able to communicate with my old Naze32 Rev 5 FC.
@davestufflebeam6774
Жыл бұрын
OCT 2022: This video gave me enough info to bring my new FC back to life. It was stuck half way between bootloader mode and who knows what... The steps regarding loading the right drivers at the right time is still relevant today. Thanks Joshua!
@user-rx9em1kw5r
4 ай бұрын
I am also stuck in bootloader mode. The indicator is constantly on. Tell me how you managed to get out of this mode?
@WaffleFPVofficial
7 жыл бұрын
I thought I knew my way around the different drivers of different boards but damn! This really explains the mess that is stm32 drivers! Awesome video!
@JoshuaBardwell
7 жыл бұрын
It's only really a mess on windows with Chrome.
@jamesordwayultralightpilot
5 жыл бұрын
I've thought of buying a Macbook for FC Comfigurators. Ya think it's worth it?
@jasonf8601
4 жыл бұрын
Josh, thank you so much. So many challenges until the part with the Zadig installing the correct driver. I've watched you for a few years. You're the man
@jameskuhlman9835
7 жыл бұрын
I had many instances between vcp vs bootloader failing to even be captured by USB. Days and hours trying to troubleshoot it, different USB ports, onboard vs add-in, etc. Driver install/reinstall/update. Came down to several of my usb cables that don't work for VCP OR bootloader even though the successfuly transfer data. Go figure. So, if you've done everything, install, remove, update, Zadig, etc with no joy. Try a different cable. Or try it first and save yourself some potential time and frustration. Arrrrrgggghhhh! (And that's being polite, lol)
@ejj978_
7 жыл бұрын
Fingers crossed here. I'm having what I suspect to be driver issues with a Kiss board. It will not enter dfu/bootloader mode and have tried on 3 separate PCs without pre-existing drivers. I know this video was for cleanflight, but I'm checking anything related to driver issues these days. Maybe it is the wire, because I cannot finding a conflicting driver and DFuse isn't recognizing anything.
@Mikeonabikeride
7 жыл бұрын
James Kuhlman thanks for the advice, I was going crazy with the same problem and tried another USB cable and of course it worked!
@jameskuhlman9835
7 жыл бұрын
Mike Pregler Glad I could help! Nice to know when all that cussin' was for a good cause. Lesson learned for me was that there IS a reason to have a couple of quality cables about.
@ConditionalBeanSprout
7 жыл бұрын
James Kuhlman this just saved me so much trouble. I had already spent 4 hours troubleshooting when really the USB cable wasn't working and I had to use another one. Thank you so much!!!!
@jameskuhlman9835
7 жыл бұрын
David Parks My pleasure! this was one of those rare times when I opened my mouth and did not come back with the tang of toe jam...
@MrJKillarado
6 жыл бұрын
Joshua Bardwell Thank you so much for this video! I had no problems flashing my SPRacingF3 board with my 1st 2 builds but with this 3rd build I have an Omnibus F4 Pro V3 and I couldn’t get it to flash at all. I ended up cleaning house and deleting all the drivers installed for BF and started from scratch. I then watched this video and followed step by step and I was finally able to flash the latest firmware on my FC. I’ve been fighting this issue for 2 days now, so thank you for the help Josh! I’m finally ready to start wiring my 3rd build! I’ll be flying this weekend finally!
@retal052
7 жыл бұрын
Great vid explaining this stuff Josh. You are an asset to the hobby :D
@JoshuaBardwell
7 жыл бұрын
+Liam Lambkin thanks!
@willd.8040
7 жыл бұрын
I second that. I've been watching for a few months now and I've learned quite a bit from you Joshua. Thank you for the great videos.
@slicedham7552
6 жыл бұрын
3rd That, i have been watching your videos right from the start. Thank you!
@thestig9699
6 жыл бұрын
I'll fourth that, I just had to rewatch this video after 1 year to get my board up and running. Thanks again Josh.
@gedgar2000
5 жыл бұрын
A great asset. I learned to fly acro from Joshua on the sim. I went from not being able to get to a gate to flying my own quad semi- proficiently. This video was huge. I'm an electrical engineer and not a luddite, but I needed something like this bad. How would you find all this stuff without this video. Surely if this vanished, Betaflight wouldn't die...
@SurgicalTechTips
7 жыл бұрын
I freaking love you man, I was racking my brain hardcore after my first build trying to get this to program. You sir, are awesome.
@JoshuaBardwell
7 жыл бұрын
Glad it worked for you.
@snaprollinpitts
7 жыл бұрын
I may be some what of a geek, but you had my head swimming. this process needs to be slimmed down, it is just toooooo messy!!!!!!!!!
@SGWARPIG
7 жыл бұрын
You are a boss, this has been defeating me for 2 weeks on my Babyhawk. Finally a resource that speaks simple English. You have another subscriber. Thank You Josh......now if I can just get settings to actually save.
@SyNFuLLj
7 жыл бұрын
Wish I had this last week! Could have saved me hours of searching.
@RtGFuSiOn
7 жыл бұрын
Thank you so much for providing this free tutorial service! Your channel has helped me immeasurably while learning this hobby! All the best!
@MrJRide2345
7 жыл бұрын
Hey Joshua - what is your suggestion for downloading the STM32 Virtual COM Port Driver on a Mac? The file is a .exe on wont work on a Mac. Thanks!
@IEROSI
7 жыл бұрын
MrJRide2345 I want to know this too! I used to be able to connect with my mac no problem. After I flashed my FC with betaflight 3.1 it stopped working? Quad comes on and activates with trigger switch per Joshua's "CLI" settings. It just doesn't connect anymore???? NEED HELP JOSHUA
@IEROSI
7 жыл бұрын
Dylan Chislett connect battery to quad. then open betaflight. connect USB to quad and computer. then hit connect on betaflight. solved.
@aarons7836
7 жыл бұрын
just put it into bootloader and flash it
@antai1275
6 жыл бұрын
I use implus and a mac conveder from exe to mac file and it work 👍🏼
@thomastt3805
6 жыл бұрын
hi Raymond, can you explain this a bit in depth, I have the same issue as above and am a newbie in mac to exe convertors, thanks!
@mopuccino6025
6 жыл бұрын
thank you joshua for being here doing what you re doing ,youtube wouldn t be the same without you!
@Jacobelrod
4 жыл бұрын
YOU ARE MY HERO! 3 Years later you saved me from returning my first drone. I've spent days looking for this information. Do you know that you are the only one who shows where the boot loader button is?!?!
@billodonnell246
6 жыл бұрын
Great video Josh, I have been trying to connect to Betaflight, tried everything, turns out I was using a usb charging cable and not a data cable, didn't realize there was a difference. Everyone having issues please try a data cable, you will save tons of time!
@RudyNortz
6 жыл бұрын
How do you tell the difference?
@ktrimberger
6 жыл бұрын
Excellent explanations for the USB driver nightmare... I spent 10 hours yesterday screwing around trying to get my BeeBrain to talk with Windows 7. I finally got it to work. Looking at this video nicely summed up the issue with the drivers hell I went through. Thanks for taking the time to do this video. Much appreciated...
@JoshuaBardwell
6 жыл бұрын
Really sorry you had to go through that. There is no reason for this to be more than a 15 minute process. This is one of a few issues that I desperately wish Betaflight would do better. Maybe now that BF Configurator is an EXE file instead of a Chrome app we can move off of the winusb DFU driver.
@unitedelectrician4334
6 жыл бұрын
Man I came back for this again... my diatone 2017 got an issue they send me a new FC now during my holiday break I change my FC watching your video again. You rock JB!!
@BrigzyFPV
5 жыл бұрын
USB CABLES - Thanks Josh and thanks to James Kuhlman, read his posts below. You solved the problem for many of us, not driver related at all. THANK YOU James Kuhlman!!! I didn't take any notice of your comment because "I Always Use This Cable" with no problems at all" BUT just because I am completely out of options trying to connect a Brand New Mamba FC for my GT R-349 HD I did try a different cable and HELLO! DFU Mode BabY!! Go F@#$ing Figure, WTF and all that stuff... if you are having trouble DO IT, you never know, it worked for about 20 of us here so you have nothing to lose, blew me away! Thank again man, rockin. Change Your USB Cable!
@2bskyhi868
7 жыл бұрын
Jeez, I watched more than 50 videos & read too many hours trying to resolve my boot-loading issues. You Josh, saved the day & got directly to heart of my problem. THANK YOU VERY MUCH! Wish I could pay you back somehow...
@JoshuaBardwell
7 жыл бұрын
If only there were a way...
@geoffrayATLAN
4 жыл бұрын
@@JoshuaBardwell love the sarcasm in here
@n-masood
6 жыл бұрын
I did learn something today! Getting my firmware updated got rid of my receiver connection errors. Gave this video a thumbs up.
@Michael-lx7px
7 жыл бұрын
Joshua, You've done it again! Thank you so much for the info on the drivers. I just went and deleted what drivers were installed because I've been having problems flashing and changing settings. This video was a great help! Now Betaflight works, no problems flashing new firmware and changing settings. Thanks again!!
@staticfpv881
6 жыл бұрын
The best video of all fpv/quad on KZitem !! ***** 5stars !!!
@stevenhealey3170
6 жыл бұрын
Only guy who says how it's done!! Thanks lots!!!!
@tellmitchell8438
6 жыл бұрын
Once again, you have stepped in and saved the day! Thank you for going step-by-step through the process. Really helpful!
@pocket_full_of_beans
6 жыл бұрын
IMPORTANT: possible fix! Try using another usb cable! Cleanflight manual says: "If you see no signs of life on your host computer when you plug in your board, check your cable with your mobile phone or some other USB device - some charging cables have only the power pins connected. These will power up the board, so the leds light up, but the host computer will not react to the device at all. You need a proper USB cable to connect your board to the Cleanflight Configurator." Worked for me!
@stablesttoast4033
5 жыл бұрын
K helpfull thx
@andreapizzocaro998
6 жыл бұрын
thanks man, i've been checking so many videos around on how to do this, but youre actually the only one i could follow and get over with this nasty process. thanks a lot for your work!
@niz76
7 жыл бұрын
Dooooood! I just flashed my Omnibus F3 nano V2 using the Zadig driver you show in your video as it has VCP. I'm so proud of myself haha. I would've had NO IDEA how to solve this without this video. What would we do without you!? Thank you thank you thank you!
@JoshuaBardwell
7 жыл бұрын
Glad it was helpful.
@sparkyfever808
6 жыл бұрын
I was struggling to connect my quad to BetaFlight for so long and tried everything on here multiple times... then I tried a different microUSB cable... and it worked! Turns out, the ones that come with your GoPro are only good as charging cables xD Thanks JB... Joshua Bardwell for all the videos! I refer to them for nearly all of my FPV needs!
@cpfpv6410
6 жыл бұрын
I posted a comment several months ago about how I got around all my driver issues by going with a chromebook and using the Chrome apps. Well, I just tested with a $35 Raspberry Pi 3 and it works!! At least on the first three copters I grabbed off my wall. I tested all 17 flight controllers with my chromebook and they all worked the first time. I don't have the time or motivation to confirm that with the rasberry pi but I have a feeling that it will work just as flawlessly. I am actually on my raspberry pi 3 typing this comment right now. I will say that BLheli-32 doesn't work with the chromebook and I don't expect it to work with the raspberry pi either because it isn't supported in the chrome app. But $40 to never fight drivers again? that's your call. But it would be an easy one for me.
@bohan9957
6 жыл бұрын
Josh,Wanted to personally thank you for this instructional video. Even though it's a year old, you have saved me many evenings of headaches. I was finally able to flash my betaflight F4 controller. Your videos are an invaluable asset to this hobby. Subscribed!
@caseyjensen5424
2 жыл бұрын
Dude, you have saved me so many hours of frustration over the years
@jeremyride1
7 жыл бұрын
You're the best man. I've been screwing with this board for 3 days (actually already have a replacement coming) and finally, thanks to you, it is connected and working fine. Thanks so much!
@gankedfpv6381
7 жыл бұрын
Such a great video Joshua, Even after being at this hobby for over 12 months, I must have had issues with this step a dozen times or more. Thanks for your work and support
@johnnievangilder5532
7 жыл бұрын
omg, you rock!!!! just a little advice for anyone using Windows XP. The zadig device says it doesn't support XP anymore. There is an option that says other version, click that and find the version that says XP.. (mine was 2.2xp) and it worked beautifully.... thanks so much Josh.. PS. I know nothing about computers and got it to work thanks to you, keep up the easy to follow videos for us super newb's, lol
@mark77woody
6 жыл бұрын
I would've been screwed without this video. You got every man and his dog showing how to tune but not one video that I could find that explains this. Ta!
@aurelienwittmann4105
4 жыл бұрын
this video really saved me from probably returning my flight controller, thanks
@erurrutia
4 жыл бұрын
This video is old but still relevant. This helped me fix my Betaflight 4.1 flashing issues on Windows 10. Thanks!
@TeeDubb
6 жыл бұрын
Found out exactly what I needed to know from this video. Thanks, Josh! You are an asset to the FPV community.
@frankblake38
7 жыл бұрын
I don't know how you know everything but I feel like I can always count on you to get me where I need to be
@segpie
7 жыл бұрын
Well it's about time someone explains this process. Very well done Joshua and much appreciated!!
@victorstr9396
7 жыл бұрын
Man, u r god send. I've been fooling around my new F3 EVO board for 2 days to get it to connect in DFU mode for firmware flashing without any success. After your vdo, everything is done in like 5 minutes. The reason why I can't find this vdo is because you refer to LUX flight controller and I just stumble upon it while searching about VCP driver problem. My Windows7 shows the board in STM32 DFU device but no DFU in Cleanflight pull down menu for com port. All the talks about VCP driver issue never stated clearly as your VDO did, which driver you are suppose to install to get thing working. Thank you, Thank you, Thank you.
@lukyadesagithadima
4 жыл бұрын
I've been watching your videos for two months based on my friend suggestion, now i learned a lot from you. Thank you for your great videos, Josh. It was helping me a lot, sorry for my bad English.😙👍🏻
@michaelengelhardt6087
2 жыл бұрын
it took my slow ass two days but got it done thanks to this video. Thank you Joshua.
@lf5133
6 жыл бұрын
Got it Joshua, Thanks for taking the time to reply on a Sunday. I didn't expect to here from you till Monday. Thanks for your dedication to the hobby.................
@softsmoken
5 жыл бұрын
Thank you for that Little Zadig step... Worked right away. Wonderful. Headaches avoided!!
@timothytendick1550
7 жыл бұрын
You gave me hope by making the comment referring to an alternative method of enabling bootloader mode. Im a green-thumb (aka "newbie" & of no relation to garden growing skill) so it should come as no surprise Ive lost count of the many times this hobby had me packing it in for the day feeling disconbobulated, quickly approaching the threshold where the mind decends into a state of madness. Im hoping it will be intuitive once I'm in Betaflight/Cleanflight what you had eluded in the statement about typing dfu mode in cli. For now, though, you have renewed my faith in the possibility of flight for my little q90 FlyingFrog. Its f3 fc has no bootloader button and finding a pinout has been an impossible quest. At the risk of sounding unappreciative I really wish you would have demonstrated the process of entering bootloader mode when you have no button and don't know the pinout for a particular fc board.
@JoshuaBardwell
7 жыл бұрын
If you have BF 3.1 or newer, type "dfu" in the command line. Alternatively, in 3.2, they changed it to "bl" (for bootloader).
@ianrobinson3038
6 жыл бұрын
This fixed an incomprehensible problem for me - why BetaFlight on my Windows PC wouldn’t connect to my FC in boot loader mode. Thank you for the detailed explanation of the problem and the resolution. P.S. the dfu CLI command makes the bootload process a whole lot easier
@JoshuaBardwell
6 жыл бұрын
Bear in mind that BF 3.2 changed that command to the more generic, "bootloader". The actual command is "bl".
@captainorr3508
6 жыл бұрын
Just need to add to the chorus of kudos & thanks. I was ready to send my clone F4 FC back after spending a couple hours try & failing to get it configured. All I needed was the right BF drivers so I could flash a current firmware version. Today, like so many days I learned something.
@yarrula
6 жыл бұрын
I know I'm super late to the party on this one, but this video solved my problems. Thanks for your hard work and insight.
@ghostriderhangtimefpv4318
7 жыл бұрын
Thank you Joshua, this totally just saved me, I bought the omnibus f3 AIO on your recommondation and could not get it flashed but as usual Josh saves the day. Thank you for what you do!
@johnnychimpo9583
7 жыл бұрын
Thanks, Joshua! This is just what i needed! I'm referring to this video for everyone who has trouble flashing his board! 🇧🇪🇧🇪🇧🇪
@helicrashpro
6 жыл бұрын
You do such a fantastic job of explaining this kind of stuff. By far the best at explaining this stuff. With that said, it's still hard to follow and still hit or miss. I think stuff like this is a part of this hobby and technology that still has a TON of room for improvement. I dread flashing a board. It seems like such a high percentage of times I have issues in one way or another. I just installed a Betaflight F4 and I can't get that to flash. It's kind of ridiculous that we have to jump through so many hoops to flash the latest version of BF onto a BF board! I thought I had this stuff figured out and have had no issues flashing the last several boards I have built with but again I find myself going to Joshua for guidance because even a person like myself that has been in the hobby for years still can't flash a flight controller with confidence LOL.
@shawnpatrick344
6 жыл бұрын
THANK YOU JB ITS A GRATE DAY WHEN THINGS COME TOGETHER YOUR THE MAN THANK YOU SHAWN
@atlanticwoodsman8347
5 жыл бұрын
Josh I freakin love you! I am super proud to be a patreon supporter .You have no idea being new at this how much of a headache this was for me to fix this until I spoke with you .THANK-YOU
@JoshuaBardwell
5 жыл бұрын
Glad I could help you get it sorted out.
@DeanChapmanFPV
6 жыл бұрын
Thanks Joshua! You no your way round this better than any man
@daffybustamante8876
5 жыл бұрын
I swear this is one of the most helpful channels in the world love u bardwell!
@kennymichaud5366
6 жыл бұрын
It works!!!! Thankyou For the advice. Been stumped for at least a week with this darn thing. Im sure ill be asking more advice. Keep the videos comming
@realname3885
4 жыл бұрын
Thank you so much i followed this guide and now my quad is ready to go. F4 boards are so much nicer man, i plugged my F4 in and it was good to go, F3 board was a week of mucking around till i found this, and when i went to replace it, a week of mucking around on my new PC to do the same
@mithunchopda
6 жыл бұрын
My BFight 210 has Omnibus F3 Pro flight controller. Everything was working fine in betaflight until I enabled the magnetometer sensor. Now my quad doesn't connect to betaflight. Can you suggest how can I disable the magnetometer sensor? Clicking on connect does nothing as of now.
@chucklathan
7 жыл бұрын
would like to personally ty for your time on this vid. im new to the quad hobby seen and the learning curve is tough. you successfully walked me thru in great detail on how to set up all the drivers and flash beta flight. very good job ty very much for this vid.
@JoshuaBardwell
7 жыл бұрын
+charles lathan thank you!
@107329
3 жыл бұрын
you are a godsend, sir. Thank you for putting together clear and consise (and also entertaining) content. It is greatly appreciated!
@manski209
Жыл бұрын
JB, So happy i found this video, needed to update some FC's and this video helped me even though its 6 yrs old. Thank you.
@brusterbruster6923
6 жыл бұрын
"you can just type the "dfu" command into the CLI..... ooooh yeah" . Ooooh yeah indeed!! Didn't know that. I learnt something today....
@JoshuaBardwell
6 жыл бұрын
Except now it has changed to "bl" for bootloader.
@doontremember
4 жыл бұрын
the vocabulary of the English language can understand it .. I think the beauty that they told us will not be complete one day .. I apologize if there is a mistake in the translation .. because I am from Saudi Arabia and my English is bad by speaking, but I am a good listener and thanks bro for any you do in this live ..I have confidence that it is good and useful for what I have done good by.
@stevebarrow3042
2 жыл бұрын
Thank you for a brilliant and easy to follow video. It really helped me understand how to flash my Omnibusf4
@trevorheidenreich1485
6 жыл бұрын
Thank you for this video. Once I did the "Zadig thing" I was easily able to flash the firmware. I am a first time quad builder and this cleared things up for me a bit
@hawker05
7 жыл бұрын
This is the most useful video on flashing a flight controller board. Thanks so much!
@docbrown-en4pw
6 жыл бұрын
Wanted to say thanks for your videos. Coming from a person that can take what someone says 3 different ways you make things understandable. I get what you say the first time without having to worry about , did he mean this way or this way. When I have trouble ( new to fpv) you are my go to person. I look for videos done by you first. Keep up the good work.
@NRMcCullough
3 жыл бұрын
Wow, thanks Josh! I've been sitting on a "dead" f4 v3 for about 3 years now. Only kept it as a reminder to test what I buy... I think you just got it working! :)
@tubbyboy210
5 жыл бұрын
You sir are a god and have helped me with FPV racing drones countless time's Thank you
@taneliharkonen2463
5 жыл бұрын
This is just such a great video time after time! I have to watch this every time I do installing on a new laptop. Thanks Josh!! :D
@GaryCrowellJr
7 жыл бұрын
Awesome! I got my first FC yesterday and was goofing around with it fine, but then wanted to update the CF version, and was stuck on this exact set of things. Thanks!
@goober24787
6 жыл бұрын
I just to start with I wish I could click the thumbs up button more then one time because you my friend are the MAN! you made that so simple and understandable!! thanks again. keep up the great work Happy flying sir
@robertopaci9725
6 жыл бұрын
Thanks Joshua! This video of yours was really useful and I avoided to throw in the garbage a Omnibus clone flight controller.
@nathaneasley4452
7 жыл бұрын
Thanks so much. You have walked me through a multitude of problems. I greatly appreciate you. Keep it up buddy
@adolphjanssen6580
6 жыл бұрын
THANK YOU THANK YOU THANK YOU I could not understand why my evo F3 would not update because I didn't have the zadig instald because I have a VTC port. At last a video that the computer dummies like me can understand, some off your vid's are toooo much for me. Cheers.
@noname-xq5ie
2 жыл бұрын
Thankyou JB this was too much information to ask you on a live stream , and after learning open tx and not being a computer guy . I have only betaflight to learn and I'm properly in to this hobby. Soldering and batteries all been ticked off . Just got build a qwad or 2 . Awesome info
@DJDevine
7 жыл бұрын
Thank you for your shared passion, I have yet to see or hear such informative intuitive videos.
@whosatube2008
7 жыл бұрын
Cheers Joshua! This put me back on track! Loving ALL your videos! Great reference for us newbies!
@FifthScaleRCLife
7 жыл бұрын
thank you for posting this video it actually helped me understand some issues I had in the pass Iv gór revo F4 board witch wouldn't flash with latest firmware, looks like I missing some drivers
@Hofftari
7 жыл бұрын
Thanks a lot for this video. I was totally lost and couldn't find any documentation about flashing a FC
@jeffharbidge6540
6 жыл бұрын
omg after trying to find this out for 6+ hrs joshua thank you for this video!!! got my FC all updated!
@user-rx9em1kw5r
4 ай бұрын
Hi Joshua. I need help. I managed to flash the firmware, but I remained in bootloader mode. The indicator is constantly on. How can I exit this mode?
@stevenhuang9259
Жыл бұрын
HI, my issue is more difficult that PC says the FC(stm32F722) is an unknown usb device, just after I pressed the button "reset settings" on BF. It is totally a brick even I reinstall the VCP driver and try zadig. PC always says unable to install driver for this unknown usb device. Do you have any idea?
@davidringler7131
7 жыл бұрын
Great Vid as Always !!!, Now i know why i am having trouble ! Thank You for all your videos and not just showing the fix but why you need to do these things which to me is the most important!.
@CplDabu909
6 жыл бұрын
After pulling my hair out trying to flash my flight controller, I got it to work. Thanks. Now onto my other problems.
@mueller9539
7 жыл бұрын
good work, this is a much needed video, im not a computer guy so this is a great. all the com port, drivers, bootloaders, uart yada yada is like french to me.
@dirtriderz6881
6 жыл бұрын
Honestly thank you so much, you don't know how helpful this is!
@JoshuaBardwell
6 жыл бұрын
My pleasure.
@PeakPeacock
7 жыл бұрын
Lol, you read my mind. I'm troubleshooting problems connecting my first f3 board. May have missed the stm unwrap step. Hope this solves my problem. Thanks!
@griff333
6 жыл бұрын
Man. Thank you so much! I’m new to this, just built my first quad and was starting to just give up trying to flash this thing. Thanks again!
@thenewnormal1988
7 жыл бұрын
Time and time again, you come to my rescue. Can't tell you how much I appreciate all your hard work. Thanks Joshua. ps great name
@beezermedia
4 жыл бұрын
This video was awesome. Just flashed by two new boards to BF 4.1!
@crazyrcpilot
6 жыл бұрын
Josh, My drop down menu in Zadig doesn't look anything like yours. I never even get the option to replace STM32. Whats up with that?
Пікірлер: 1,2 М.