Thanks for showing my app, and great video, as always. As I mentioned yesterday on discord, your video motivated me to look for an alternative to ziplock bags, it's a huge waste and that's always a bother. I haven't had breakfast yet and your shot at 6:06 made me crave ramen so bad.
@teikenramenchannel
Жыл бұрын
There is no bad time for ramen!!! Always great to see you in the comments. Thank you for your amazing calculator man
@leopoldwhylie5076
Жыл бұрын
Thank you for the calculator. I had made my ramen journey more pleasurable.
@lkjlkjoi1840
4 ай бұрын
Is there a benefit to using the kitchenaid for mixing over the food processor? It seems like the food processor would work the same for both low and high hydration. I'm curious because I only have a food processor and will be working with higher hydration doughs.
@sanjivinsmoke3721
9 ай бұрын
I just watched this video, I happened to open a Japanese food shop, and started selling takoyaki and then ramen, about 1 year ago I only cut noodles manually by hand, as I learned and developed my knowledge increased, and now I use an automatic noodle machine like the one above. In use, this video reminds me of my long journey of learning to make ramen. thank you for making a good video. keep up the good work friend.
@teikenramenchannel
9 ай бұрын
It is a long ride that’s for sure. Congrats on your shop
@jeffgriffith2868
Жыл бұрын
I was all set to buy the Kitchen Aid roller and I think your video may have saved me the money I can instead spend on a Techtongda. This is all really good stuff.
@teikenramenchannel
Жыл бұрын
Happy to help! The kitchenaid for sure has way more uses outside of ramen…but if it’s only the noodles you seek…🧙♂️
@lassejensen1210
Жыл бұрын
Great content as usual. See you in 2023. I’m celebrating new years with ramen. Looks like my noodles will receive an upgrade!
@teikenramenchannel
Жыл бұрын
Ayyyyy!!!! Happy new year to you
@ssirju-ramnarine5899
9 ай бұрын
Can these noodles be dehydrated?
@teikenramenchannel
9 ай бұрын
I think it’s possible but they are best if consumed fresh
@joujounguyen5246
Жыл бұрын
Thanks so much for this video! After a lot of comparing I think I'll go ahead with the Techtongda instead of the Hengwei I was eyeing earlier. Where did you get the separate 1.5 mm cutter?
@teikenramenchannel
Жыл бұрын
www.dhgate.com/store/20687745?dspm=wapen.pd.viststore.1.Hnu76rav5agWCk3s209y&resource_id=#mpd-visitstore I got it from the shihailei152 store on DHGate but I think you can order the 1.5mm cutter with the machine on amazon
@helladecent9314
Жыл бұрын
So I'm looking at buying this noodle machine but the one on Amazon only has a 3mm noodle cutter. Where did you get the smaller knife/cutter?
@teikenramenchannel
Жыл бұрын
Had to go looking for it on DHgate
@mentalalchemysubliminals
10 ай бұрын
Do you think we can use Nonna's italian pasta machine for these noodles?
@teikenramenchannel
10 ай бұрын
Well, Mental Alchemy Subliminals, I think as long as you keep the dough over 35% hydration you will be fine
@helladecent9314
Жыл бұрын
On the ramen noodle calculator there is a protein portion. Should I be adding protein via vital wheat gluten for those numbers?
@teikenramenchannel
Жыл бұрын
VWG or various other types of flour will bring different protein content to a noodle. I think messing with the protein content deliberately is a little down in the weeds but it will help you understand why your noodle is the way it is (high protein is typically chewy and firm, lower protein is soft)
@triglav_kun3446
10 ай бұрын
🙌🙌🙌
@dannychane
9 ай бұрын
The tupperware hack might be the hack I never knew I needed! 🙏
@teikenramenchannel
9 ай бұрын
It’s good for the planet!
@AdrianaUmp
Жыл бұрын
already watched all your videos love so much please keep it up!!!! can you do a chuka soba tomita style ramen? never seen anyone here trying to do and i think would be cool ❤
@teikenramenchannel
Жыл бұрын
I can look into that for you
@williambrasher1891
Жыл бұрын
Where did you get the 1.5 mm cutter for the techtongda?
@teikenramenchannel
Жыл бұрын
The shihailei152 store on DHGate
@williambrasher1891
Жыл бұрын
Badass
@joujounguyen5246
Жыл бұрын
@@teikenramenchannel By any chance do you have a product number or ID for this cutter? I've had no luck finding it, and the other 1.5 mm cutters I have found don't fit the Techtongda...
@teikenramenchannel
Жыл бұрын
I do not have a product number but if you message the shihailei152 shop and mention me by name I am sure they would help you out
@antonc81
Жыл бұрын
Nice.. some good ideas. I’m still tossing up between a techtongda and a vintage Japanese cast iron manual machine.
@leopoldwhylie5076
Жыл бұрын
But where am I to find such a vintage machine?
@antonc81
Жыл бұрын
@@leopoldwhylie5076 yahoo auctions Japan via a freight forwarder… they have a narrower dough path and are less convenient overall.. but they do look nice :)
@viengkhamsibounheuang2975
Жыл бұрын
Hello Teiken, where i can buy the machine for make udon noodles at home just small machine. Please let me know. Thank you so much
@teikenramenchannel
Жыл бұрын
A Marcato Atlas is probably the smallest and most thrifty option. Good luck! a.co/d/eC7Un6j
Пікірлер: 40