This video was a lot more helpful than the instructions that came with my door - Thanks
@andrewcowan5750
2 жыл бұрын
I agree with everybody else who said this video is MUCH more helpful than the printed instructions. There were two things I still struggled with: first, hanging the door, and second, what to do when the pivot lock is too close to the jamb and the door will not fully close as a result. I ultimately found it was easier to get the pivot pin into the pivot lock with the door swung out perpendicular to the track, inserting the guide pin after. As for the pivot lock being too close to the jamb, the screw in the middle of the pivot lock can be loosened to allow the pivot lock to slide in the track. I found the screw too tight to loosen with a manual or electric Phillips head screwdriver, however, a slotted screwdriver bit on a 6" ratchet handle did the trick handily. A socket wrench could also have worked.
@danterizco
6 жыл бұрын
Thanks for the video, much better than the written instructions.
@williewiggles1
8 жыл бұрын
Very good instructions. Unlike on the bag which are incomplete. Thanks for the help
@davidkelly9120
3 жыл бұрын
This video is tremendous. Well done and thank you.
@GymMonster88
8 жыл бұрын
Much better instructions than the ones on the hardware bag.
@surlybirch
13 жыл бұрын
Very good information here. Many thanks~! My door was up in about half an hour~!
@scooner67
6 жыл бұрын
The hardware is much better than standard bifold hardware installation that you get with JWEN
@spongechuck14
11 жыл бұрын
Does anyone know if bifolding doors such as this are decent for blocking sound? How do they compare to a sliding wooden door and a traditional hinged door? Thanks!
@shaukatsb82
8 жыл бұрын
Very good information
@faramarzmokri9136
Жыл бұрын
I have finished 82.5 inches of closet opening. I like to use by pass sliding preferably 2 slabs of 42inches wide. But, the problem is apparently they don’t make 42 inches wide! I could use two 22 inches instead by they don’t make 22 inches ! Any ideas? Thank you
@giannisf
7 жыл бұрын
excellent!!!!thanks very good job,but how I buy the instrument?can you recommend me hello from Athens mister .
@movistech7490
4 жыл бұрын
can i ask you a question, which tool has been used to make the video?
@rachelpierzynski2661
7 жыл бұрын
the instructions were better, the instructions did not state that the door hangs from top track.
@heidicharles5548
6 жыл бұрын
i threw instructions away ( Worth less) watched video !! instaleed in minutes
@jeremybradbrook3532
3 жыл бұрын
Helpful but I am installing a 200FD series. I could not find a video about this one.
@waltdenny892
3 жыл бұрын
Here is the 200FD instruction sheet: www.johnsonhardware.com/Content/Images/uploaded/Installation/FD/IN200FLD.pdf
@whodat6922
7 жыл бұрын
I am straight, not bi. Can I still install these doors? lol
@JohnDoe-mp1zk
4 жыл бұрын
probably not
@kevinm.-fy3vo
3 ай бұрын
BS….. Masters from MIT is needed to read your directions. Your company to provide instructions for the average college graduate to figure out. Adios my $22 for a bunch of your screws. #Shame
@koteamv908
6 жыл бұрын
This dont tell me anything i jist click it and it wasnt the video i needed lol
Пікірлер: 23