Awesome video. Thanks for the detailed narrative with tools and size. Thanks for sharing!
@maddux1234
Жыл бұрын
Looking good, I can’t wait to see what you do with the front fascia
@tedd7028
11 ай бұрын
I put 275/65R20 BFG ko2s on those same wheels and they come in at 34" with no rubbing issues. Looks and works great.
@chrispetersen1423
Жыл бұрын
I did the same on my 2019 ram 1500 but it was Eibach. And ur right the ride quantity is so much better then the spacer. Glad I went the Eibach way
@bigf1502
Жыл бұрын
Have a 19 (Same truck as yours, color and all except with 3.5 Ecoboost Max Tow)- Fox by Roush coil over system 2.5” . I kept the stock rims and got 275 65r20 Cooper Rugged Trek tires which run big. (34.65x11.75) and it’s been flawless. Has taken all the abuse I’ve put her through. You’re going to love the new system. You won’t be disappointed. Edit: You’re going to lose fuel mileage tho, but who cares.
@stevenskoog
Жыл бұрын
Love this color! I went with black on my 22 f150. I’m on a 2.5” level 295/60r20 Nitto recon grappler 20x9 +10 offset and I rub in reverse only turning left for some reason on the front crash bar. If I flex the suspension it’s really close to the front bumper so if you stay in stock wheels you should be good for off-roading and not rubbing.
@zunar_j5_933
23 күн бұрын
As someone who has done more than one kit install, get a "Clamshell Strut Spring Compressor". It is worth the extra money and feeling of safety. Super easy to compress with a light impact.
@robertchapman4488
Жыл бұрын
Try to go in the middle find you a tire that's right at 34 like a 295 60 20. Maybe enough to look good but still be really good off-road letting you have all your travel and rebound clearance. I'm not brand loyal but I like how you switched it up I think it was a good move.
@Superthecod
Жыл бұрын
Just get a 35” it’s cheaper.
@tuckswanger
Жыл бұрын
Thanks for tge information. Great video
@ross.hartman4269
9 ай бұрын
You are definitely comfortable around that spring compressor
@darellhunter2205
Жыл бұрын
A 10 wide wheel with 34 or 35 M/T would look good on this level. Not as much stance as the twelve wides but a 35 would let you fill up more wheel well. I did a 6" with a 35x13.50r24 on my 21 F150. 26k fun miles so far! Can't wait to see what you decide to do! 👍🏾
@fredwalker839
Жыл бұрын
I’m not a ford guy, I own only Chev HD’s , but all have been “tired up” My stock chrome 18” rims are 9” wide which is nice, I , after many hrs. pickin the right tire , was a Cooper AT3 with an aggressive sidewall , but super quite summer tread .Soft ride , no balance, 12” wide,35.8” tall !Speedo only reads 1 1/2 KPH slower. Perfect, filled the wheel wells & with “street flairs” 1 1/2” stick out looks like an aggressive “man’s” truck ! Your Ford does look good @ that height!
@thehappyhermit01
21 күн бұрын
Cooper Discoverer AT3 XLt's on my 2004 FX4. Best all-around tire out there, imo.
@averykelleyy
Жыл бұрын
I have the 2.5 same truck and have used 4wd in rough conditions many times everything still works.
@averykelleyy
Жыл бұрын
I also pulled my rear blocks to get the baby lean
@kennethhardin3790
Жыл бұрын
Looks really good!!!
@nathanchase4617
Жыл бұрын
Yessiree! That’s the ticket! Beautiful
@kdcarver
28 күн бұрын
Thanks for putting together this video. I had a good alignment shop in my area replace the front upper control arms (bushings were cracked) and install new shocks (Bilstein 5100 with the adjustable leveling rings) a month ago for my 2011 F150 FX4. They leveled the truck, but It’s still slightly nose down, just not nearly as raked as it was from the factory. I then got new tires (Falken Wildpeak A/T4w replacing worn out Bridgestone Dueler Revo 2s of the same size) and had the truck aligned again to give myself a headstart on Houston potholes ( the camber is slightly negative). At low speeds and bumps, the new suspension and tires are great, but I'm disappointed in the highway driving performance. The truck requires a lot of driver attention to keep it on track compared to previously. I have to make small adjustments as if the steering is loose. It's tiring. Has anyone else had this issue when they leveled their F150 of this era with the Bilsteins?
@ForrestMarshallHarvey
Жыл бұрын
I removed the front bumper lip on my 21’ F150 and it looks so clean, I recommend it.
@paytonwoodard5767
Жыл бұрын
Keep up the good work 👍.
@89browndog
Жыл бұрын
Looks good 🇺🇸
@nickb.237
Жыл бұрын
Tint the windows. Get a short antenna. Get black wheel well liners for the back tires.
@SuperDave-pe1zw
Жыл бұрын
It's a truck, do not pull rear blocks!!! The higher the better and run 35s, they're only 33.5 on the truck, no tire is the size they say it is. Take 1" off any advertised height. Your 32s are only 31. Bigger is better!!!
@travisjohnson3849
Жыл бұрын
Looks awesome! I can’t wait to see what you pick for wheels and tires.
@middickmotors6019
Жыл бұрын
awesome video man!
@randyrodriguez3127
Жыл бұрын
My 2019 had 2.5" level kit up front and a 1" drop shackle in the back and i was running 305/40 22x12 -44 offset no rubbing I did cut off the crash bars and it looked amazing sat perfectly fine as well
@jec661
Жыл бұрын
Do some 295/60/20. They're right at 34x11.5 tire size. It's almost perfect with a level.
@northjerseykevin409
Жыл бұрын
Thanks for the video. I was wondering if the labor to do this job would tip the scale and would it be close to the same price to buy a new set of coilover’s ? I have no idea about pricing. Just a thought
@josipdolic6391
Жыл бұрын
Great job!! I did some nice additions to my truck but still not sure if I want to do leveling
@B_EIMON
Жыл бұрын
Those 5100s are great and should retain stock rideability or even better with better performance than stock
@connerellsworth8736
Жыл бұрын
Pull rear blocks. They are a little over an inch tall. Also put rear fender liners in. Make it’s not look so rear high as well
@the1realktmriderk560
Жыл бұрын
Angles look actually way better than I thought!
@bandit0724
Жыл бұрын
Looks good
@zachpijanowski
Жыл бұрын
I love your videos keep up the amazing work Chase!
@lmfscrew
Жыл бұрын
Thanks!
@jeremiahhernandez7314
Жыл бұрын
Fuel siege wheels would look insane. 20x10 on some 33s!! Wont rub and will look good
@eliseoreynoso3586
Жыл бұрын
You need that all motor tune from this tuner in Houston he holds the fasted all motor f150 and you need that corsa muffler 🔥
@joelthomas4294
9 ай бұрын
I’m just gonna get my truck lifted 6 inches with a suspension lift kit, nice shocks though!!
@ethangray2375
Жыл бұрын
35s w stock wheels for now and that will be a good off-roading setup for the truck
@durangodan78
Жыл бұрын
Those bottom strut bolts you can use an air hammer to knock them out of the strut to make it easier to remove the strut.
@2fs2ns
2 ай бұрын
I know you're supposed to mark the alignment, is this strictly for ease of reinstall so the top bols line up? I had a 2" spacer there, I'm removing it now that the 5100's will provide that lift, but i'll have to rotate the assembly one direction or another in order to get the bolts to line back up. Not sure how I'm going to do it just yet...but wanted to make sure the spring itself or the top plate don't have to be oriented in a particular direction.
@duffbeerman4115
Жыл бұрын
So questions if you adjust the front to a lower level would the cvs still be pretty bad I know they won’t be factory but just wondering
@georgiapainter6961
Жыл бұрын
Looks good ole sun
@daver2964
Жыл бұрын
Great Job ! love the look...How much was total time- to do the front.?
@gman0812
2 ай бұрын
One last question, did you adjust the rear shocks or straight out the box “stock height” ?
@gman0812
2 ай бұрын
Did the “2.5” or in your case 3” loft settle a bit or did it stay the same as when you installed?
@TheWolfMatt
Жыл бұрын
So you going to put Falken WildPeak A/T3W on this one? I'd really like to see what you think about those as it's my tire of choice for "on/off road" use tire. The level kit looks nice on the new truck.
@connerellsworth8736
Жыл бұрын
I’m running a 2” level with a 17x8.5 with a 315 70 17. A little trimming and it looks great
@duffbeerman4115
Жыл бұрын
How are you cv angles
@connerellsworth8736
Жыл бұрын
Cv angles really good!
@jessecotterman8237
Жыл бұрын
Great video. Not sure why the sockets keep swapping between standard and metric. All metric seemed to fit all my bolts - pretty sure Ford isn’t mixing these days
@michaelheath2452
Жыл бұрын
When you tune it i'd definitely check out SSI tuning
@CarolinaBowTie
Жыл бұрын
This truck gets better every video!
@lukedozeman3670
Жыл бұрын
Get a Raptor Setup on marketplace to do some wheeling! the raptor 315/70/17 should fit nicely
@johnniebkid
Жыл бұрын
Just installed the Bilstein 5100's on my 2022 XLT 2.7. There is 5 settings for the snap rings. I went to the 3rd one. which says 1.26". It lifted the fronts 2.25" The truck is completely leveled out, which wasn't what i was looking to do. They are great shocks, but ya think they could get the measurements correct.
@kennymestayer926
5 ай бұрын
Same here. Had a shop install mine. Set on the 2" notch and it went up almost 2.75". It's too high for me. Wanted to maintain some rake for towing. Now I've gotta pay them to take it all apart to reset it and do the alignment again. Not too happy about it right now 😡
@md2628
Жыл бұрын
I run the 4600’s on my tayhoe. Biggest reason was im pretty sure the fronts were the same ones from the factory back in 2000 and it rode and handled HORRIBLE. Best money ive spent on the old pile thus far
@Heavychevy0402
Жыл бұрын
Where you order yours from?
@md2628
Жыл бұрын
@@Heavychevy0402 shocksurplus
@banksrogers3081
Жыл бұрын
The side steps and front bumper lip gotta go aswell as mud flaps if u got em but take an inch out the back end
@vincenzomilillo4835
2 ай бұрын
Are you familiar with the RAS system? If so inhave that installed on my 2020 f150 4x4, and itbraised the rear by approximately 2 inches...donykunthink the last settimg would being it level or should i put it on the 2nd to last setting? Thank you
@maxoviedo2934
Жыл бұрын
🔥🔥🔥🔥🔥🔥
@fernandotrevino5467
Жыл бұрын
Why wouldn’t you retain full usage for the four wheel drive with the 2.5” level? Thanks in advance
@jedd1004
Жыл бұрын
Looks great, just curious though...I didn't see you put the bumpstop back on before the top hat, do you not reuse it?
@ryancoates872
Жыл бұрын
295/65r20 is biggest to fit with no rubbing and no spacers on a level. Do that with stocks
@jordanwendell6279
5 ай бұрын
Any steering issues? Mine almost feels like it’s slightly binding when turning after the install
@ballinonnabudget
Жыл бұрын
I think some nitto mud graps would look so damn good on this
@NoMercyGTCS
Жыл бұрын
I tried putting mine on tonight but failed. I can’t seem to get the sway bar end link free from the sway bar. Any tips? I beat on it with a rubber mallot more than id like to admit. I only had my passenger side lifted on a jack stand. Would it help lifting the entire front end? Any help is greatly appreciated!
@chrisd3379
Жыл бұрын
gonna look fire when some big tires are on it
@leviwaldron4
Жыл бұрын
35s & stocks 👌🏽
@sellecksmith3710
Жыл бұрын
Either those stocks and yokohama geolander xmt or some methods with Baja bumpers and what not
@bradleyholmes9743
Жыл бұрын
Now it is time for some rear wheel well tubs to match the front
@Whats_noah_up_to
4 ай бұрын
Can someone answer why you would do all this instead of use the puck spacer? Pros and cons? Trying to understand.
@austinkrack4648
4 ай бұрын
The main reason is upgrading to better overall suspension, and depending on the mileage of stock suspension, pucks can wear them out quicker if not already worn. and then would have to take back off to replace, better to get new in my opinion!
@Superthecod
Жыл бұрын
Everyone saying doing a 34x11 haven’t tried a 35x12.5.. it fits perfectly with no rubbing.
@masonmccormick5990
Жыл бұрын
A nice bubba truck setup would look so clean on this thing
@unknownpersonally1612
Жыл бұрын
Hellion twin turbo kit bro
@bonkeykong1879
Жыл бұрын
As many times as you’ve done this now I’m surprised you haven’t gotten yourself a set of spring compressors
@raysprojects4956
Жыл бұрын
Can't wait to see what's next but we are starting now
@joebonilla5997
6 ай бұрын
I've got a 2018 F150 l'm going to use it as a daily do you think I should put these 5100 or go another route?
@itsmeagain3449
3 ай бұрын
Dumb question, how did you jack up the truck? Couldn’t see jack stands or anything
@JoseAReyes-nx6tl
Жыл бұрын
35s on stock wheels will fit. That’s what I have on mine with 2.5 level.
@connormcclelland2682
Жыл бұрын
26 x 14’s would look so good in my opinion
@andrewhamel15
Жыл бұрын
Finally when are you putting drop shakels on it?
@waylondunkin3175
Жыл бұрын
I’m a perfectly level fan not a 1/16 rake or a 1/16 squat just perfectly level lol. It’s hard to do though. Defiantly put some 35’s on the stocks
@isaacdagnan
Жыл бұрын
Should my 01 Silverado have enough torsion key lift to not scrub with 18×10 wheels with 275×75-18?? PLEASE REPLY ANYBODY NEED ADVICE!!!!
@Obsession_fords
Жыл бұрын
Do 33s with those wheels bro it’s gonna look clean
@tommyortega8183
11 ай бұрын
Would love too put those on my 2014 4x4 stx king cab.what was the cost.
@fredcornelius9247
Жыл бұрын
What kind of exhaust do you have
@R1Kyle
Жыл бұрын
A big thing is tightening your UCA bolts up when the vehicle is sitting on its own weight.
@chrism6861
2 күн бұрын
The front is higher due to UCA being tightened at the lower travel position.
@thesaffellman
Жыл бұрын
Needs 35’s they look great on the factory wheels
@Justjackson7
Жыл бұрын
I’m go with the 6inch rough country lift on my stx 5.0
@chasekeigans4342
Жыл бұрын
True duals
@KZ-qs4rw
Жыл бұрын
Tighten upper control arm bolts with vehicles weight on suspension at ride height...
@jorgefigueroa0098
Жыл бұрын
Have Lund racing tune it, when it becomes available👍🏼
@Herrera419
4 ай бұрын
I put a 4 inch spindle on my 2014 F150 and upgraded the struts.
@Tyler-qu2nz
Жыл бұрын
i wanna see what some king ranch stocks on grapps look like on this thing
@alexemery7204
Жыл бұрын
Unless every comment is the lucky winner for a prize, I think there is a scam going on replying to everyone in the comments. Otherwise, great video! My set of Bilstein 5100's just came in can't wait to install them.
@colbypittman5054
Жыл бұрын
Stocks and grapps FTW!
@JoseOsorio-vs3st
Жыл бұрын
Do you know where the leak usually starts ?
@raze4789
Жыл бұрын
Usually put boots up so they don't get snagged by stuff on the trail. I'd check height again in a couple days, should settle some.
@Jeffintheglen
Жыл бұрын
Raze. He put the rear shocks on correctly, the boots are on the bottom.
@jasonbrushett2005
Жыл бұрын
Boots down
@MattyiCeGames
Жыл бұрын
Never clicked faster
@mylesdixonproductions4756
Жыл бұрын
Same
@UndefinedAz
Жыл бұрын
You should consider king coil overs
@chrisbell2332
Жыл бұрын
Well if your wanting to go with the off road look how about some 17x9 wheels an 33 or 35’s.
@diegomarquez9523
Жыл бұрын
A raptor inspired build I think would be cool maybe 🔥🔥
@jonathanorchard4444
Жыл бұрын
Shop is telling me it will take 2 1/2 hours per side on the front to do. Does this sound accurate?
@sethfranklin8033
10 ай бұрын
I did the rancho strut assemblies and rear shocks on my '20 model in the front yard with a jack and hand tools 3hrs total and that was taking breaks and everything torqued to spec, it'll be a little more time with the billsteins having to disassemble and re-assemble the Ranchos were a complete setup
@MultiMuskyman
Жыл бұрын
Just curious , aren’t there torque specs for axle nuts ?
@johnniebkid
Жыл бұрын
No, just snug up tight with a socket. Never use a impact
@fernandobriseno8164
Жыл бұрын
Yes, they're very low. I think for my 2012 it's around 20 or 30 ftlbs.
Пікірлер: 192