I remember doing mine on my 19 and taking the studs out were a LIFE CHANGER
@MakingNoise45
17 күн бұрын
@@ThenewguyYT I figured it out on the second truck I did lol
@robertadair9756
4 күн бұрын
You are The Man!
@MakingNoise45
4 күн бұрын
@robertadair9756 lol thank you
@jerryjeromehawkins1712
3 ай бұрын
I''m getting ready to level my '17 XLT soon... so this video is greatly appreciated my friend. Subscribed! 👍🏾 🇺🇸
@MakingNoise45
3 ай бұрын
Thank you
@Forddude24
4 ай бұрын
Sweet video, thanks for this! Might do this on my 23 as well! 😅
@MakingNoise45
4 ай бұрын
Thank you glad I could help
@abs8122
4 ай бұрын
Thank you!
@jameszeiger8533
2 ай бұрын
Great video/ Question: how much deflection on the CV joint angles was resultant from the leveling, e.g., too high of a lift via shock tower spacers verses a diff drop bracket method can result in a lot of rotation stress on the joint if it's too much. Any ideas on what your CV joint angles are now as I believe in stock form they are with little if any deflection? Kindest regards.
@MakingNoise45
2 ай бұрын
What a difficult question. 1st of all, I have no idea, lol. 2nd, my buddy had me do a 3 inch on his 2014, and his ball joint pulled apart. Lucky for him, he was in his driveway so no major damage. He had to do an aftermarket upper control arm to get within specs. Now I did a 2.5, and I'm maxed out on my camber and cast. So I wouldn't go any more than a 2.5. Anything after that, I'd do a full suspension lift. I really hope that answers your question.
@jameszeiger8533
2 ай бұрын
@@MakingNoise45 Excellent info you shared on your experiences with the installs you’ve done. Thank you for the reply.
@diambo4life
Ай бұрын
I did a lowering shackle instead and removed the blocks. 3/4" rake. No alignment needed.
@MakingNoise45
Ай бұрын
Yep, that's a great plan if you're not looking to do bigger wheels and tires like I am.
@marknitzsche7128
4 ай бұрын
Did you use the Motofab 2.5” pucks?
@MakingNoise45
4 ай бұрын
Yes
@FordGuy20111
2 ай бұрын
How are the cv axles? Do u need aftermarket upper control arms?
@MakingNoise45
2 ай бұрын
If you did a 3 inch, I would say yes. I did a 3 inch on my buddy's 2014 fx4, and he couldn't get it aligned. So he did the upper control arms, and it worked out great.
@johngarner9929
4 ай бұрын
Did leveling impact fuel economy or handling?
@MakingNoise45
4 ай бұрын
No, not at all. When I put bigger tires on, it will, though.
@johngarner9929
4 ай бұрын
Thanks@@MakingNoise45
@JLeeChron
3 ай бұрын
Do not have to take the axle nut off
@MakingNoise45
3 ай бұрын
Yes you need to slide the axle out of the spindle.
@JLeeChron
3 ай бұрын
@@MakingNoise45I did not have to and the fox2.0 went in fine with no issues for 30k. You are really good at working on things though.
@MakingNoise45
3 ай бұрын
Well, I guess if you want to stretch your axle, fight, and waste time, then don't undo a simple axle nut. This is the way I think it should be done.... I think you need to find another way to occupy your time instead of being a keyboard warrior.
Пікірлер: 25