dude we've been messing with our bings for days to only recent avail and you just answered so many questions. very appreciative over here
@TravisTutorial
9 жыл бұрын
wolvesnrp Right on, bings rule! Glad the video was able to help
@fractuss
10 жыл бұрын
Excellent video, clear, concise and informative.
@voicesonair
10 жыл бұрын
Thanks travis.....your info is slways apreciated......
@thommievg6008
10 жыл бұрын
Hey Travis, really like your videos! Always helpfull, could you please upload one anytime soon, really waiting on one
@ryanprosser3424
10 жыл бұрын
Hey Travis, another great vid as usual not much of a scene over here in the uk, but getting better. What part of America are you from? Thanks Ryan
@nainka11
3 жыл бұрын
Very well done and Thanks
@TravisTutorial
3 жыл бұрын
Glad you enjoyed it!
@jasonricci3198
7 жыл бұрын
Great info. Bings are very finiky. I have a mild 50CC high comp. kit 15mm Bing and intake, Biturbo, Iridium plug, Performance ignition coil and I tell ya....I just cannot get WOT tuned perfectly. It's driving me crazy. It was fun at first, but man, I've upjetted, downjetted, changed clip positions, etc.....
@christianhowald9195
2 жыл бұрын
Very well explained, thanks
@TravisTutorial
2 жыл бұрын
You are welcome!
@maxgarage7207
10 жыл бұрын
nice vi i got an new video with a first startup of my puch maxi 70cc
@lisajonas5646
6 жыл бұрын
I have a 79 Puch Newport 2 with original air box, promo exhaust, just replaced 12/14 carb for treats 15 mm Bing clone carb. Wanted more HP, now it Boggs when full throttle. Didn't see what atomizer, jet came with new carb. Guess I have to take it all apart again. BTW, getting the throttle cable to fit this carb was NOT easy. My new throttle cable had no room for slack. Please show us how you would do this.
@DJMIGHTYZION
2 жыл бұрын
Hi travis I have a puch magnum x it starts up then it Boggs down on full throttle it’s ok for a couple mins then Boggs again the carb has been cleaned everything is original as well ? Can you help me ?
@TheTrainWreckKid
5 жыл бұрын
I have a 1977 puch. When taking the atomizer off it appears that the jet is attached to atomizer (i.e it will not come off). Should the jet come off or did they come in 1 pieces? Just wondering because I'm running to lean I think. Just put new air filter on and bogs when I hit throttle. Thanks
@Scbrice1978
6 жыл бұрын
Hey can you help my bing 24 puch 175 carb bogs down on throttle
@woDirkful
10 жыл бұрын
What About the 342 a/b
@huyhuongvu9529
6 жыл бұрын
Travis, can you tell me where you get that multi-circus carburetor (what brand etc..) and whether I'd need to upgrade the intake manifold and air filter as well. Thanks.
@ryancook6452
4 жыл бұрын
It's a mikuni carb, they're used on old Yamahas aswell.
@hariprasath3666
Жыл бұрын
Sir, what will happen when u increase atomizer samll holes .will it become lean or rich??
@aaaabababa
5 жыл бұрын
Found on Puuks!
@luispereiratimoteo
7 жыл бұрын
Hi travis please help me , i have a peugeot 103 moped and i swap the original carb for a 17 bing , and now she is bogging ,i dont know what to do , help please
@RourkeKendrick
8 жыл бұрын
Was this made after you had problems with your e50 not idling with a kit? I remember a thread you posted on moped army.
@TravisTutorial
8 жыл бұрын
+RSK RC I think this was made right as I was making my breakthrough on fixing that bike. The red Maxi in this video is now the most reliable bike I've ever owned. Really strange final jetting - 68 main, big ole hole in the slide but it idles perfeto all day and has good power through the entire throttle range and never goes over 320 degrees.
@RourkeKendrick
8 жыл бұрын
You have the treats 70cc kit right? What size bing are you using? And what slide and atomizer did you end up sticking with?
@TravisTutorial
8 жыл бұрын
RSK RC Yep, it's the version 1.5, the DMP kit, nice janky bi-turbo. 14 bing with one of the leaner atomizers, I believe a 2.20 but might have been a 2.17 from a 15 bing. 24 slide all the way. I've clocked probably a few thousand miles on the setup riding in Oregon and haven't even had to open the carb so I can't recall 100%
@RourkeKendrick
8 жыл бұрын
And what speeds are you reaching? I have a maxi with a treats 70cc kit, stuffed crank, case matched, boss pipe, and a 14mm bing that I just found out was 12mm. I have a 73 jet and a 2.22 atomizer in it. I plan on boring the carb tomorrow so I will be able to go a little faster than 35 mph. lol And also, did you pay attention to squish? like adding base gaskets, head gaskets, or modifying your head?
@TravisTutorial
8 жыл бұрын
RSK RC It's good for about 42mph. It could be faster if I took the time to really do a quality case match job and had a better pipe. Best of luck with boring the carb, always wanted to try that. Proper squish is important for sure, but this is my "fun" bike so I just used thick base gasket material so the piston cleared the exhaust port and then called it day. I used the low comp 70cc treats head.
@chrisanddave22
9 жыл бұрын
Bings are simple? They are like rocket since compared to a Delloto sha. The only thing you can do to tune them is to change the jet and adjust the idle.
@TravisTutorial
9 жыл бұрын
Chrisanddave22 Exactly. If you've ever ridden a Motobecane where someone upgraded the Gurtner for a Dellorto 14.12 or even a bone stock Puch e50 with a 14.12 you'll find the idle is pretty rich and you'll bog off the line and there isn't much you can do about it (outside of modding the slide). Both carbs are fine choices, so for someone wanting the quick and easy I'll point them toward a sha 15.15 but for someone wanting to keep their setup I'll help them tune the bing.
@chrisanddave22
9 жыл бұрын
Shit id give my right leg for a yellow Motobecane lol. I have a 2003 Kinetic luna. or a tfr whatever you wanna call it. I say luna because its not the tfr usa one. I was able to tune it by stuffing some rags in the airbox and modding it. But that was back when I first got it.
@lisajonas5646
6 жыл бұрын
Please show us step by step how to insert throttle cable to 15mm Bing carb clone
@roberthealy8519
5 жыл бұрын
@@chrisanddave22 Stuffing rags..........that is a sign I'm going to have a great day.
Пікірлер: 40