Just repaired my vaccum while seeing your video. Thanks for explaining everything what I need to hear to fix mine. Gbu 🙏👍🏽 really appreciate it man.
@VacLab
Жыл бұрын
Wonderful!
@metoo8914
Жыл бұрын
Doesn't get better than this! Even your comment section provided the bearing number (608) too. Thank you for giving of tour time to teach us all how to make the roller repair professionally. before
@VacLab
Жыл бұрын
You are welcome.
@yairakatz8688
2 ай бұрын
Got my vacuum cleaner back up and running. Thank you!
@VacLab
2 ай бұрын
Great!
@GeezN
Жыл бұрын
Thanks for the video, I was replacing the belt without knowing that the bearing is jammed. But now after removing the rust, machine is making heavy loud noise. I checked for any lose body part but cannot find any.
@coast2coast00
2 жыл бұрын
Thanks! saved my mom from buying a new vacuum. I had some new 608's on hand so I was able to replace the rusty bearings for her before she finished her snack.
@tonymorris1465
2 жыл бұрын
Exactly the video i needed.I forgot where the spring clips went after taking it apart.thanks
@VacLab
2 жыл бұрын
Your welcome.
@ryanhawkins1235
2 жыл бұрын
Nice video. I need to track down some of that Grease for some Hoover Convertible beater bars I need to order bearing for to get rebuilt and for a Electrolux CB that needs bearings worked on too.
@mikehrdlicka8635
Жыл бұрын
I looked on Amazon for bearings. The number you gave. Kind of expensive are the skateboard bearings the same?
@VacLab
Жыл бұрын
I get everything on eBay, not Amazon.
@nonelost1
Жыл бұрын
Your video was educational! Now I know that WD-40 does not suffice for grease. And the idea to use sockets to help remove and possibly replace bearings was educational too. At the end, you should have stood up your just completed and treated brushroll up on it’s end and then give it the spin test. Take into account that the new bearing and the new grease have to be “broken in“ first. This video will come in handy as I right now have two trashpicked PowerForce 2191s, both of which need brush roll bearing surgery. One of them also needs a new height adjuster as the tab on one side is busted off. Do you have a video for a Jerry rig repair for that or does it strictly require getting a new height adjuster?
@KirbyEnthusiast
2 жыл бұрын
Nice video Bill 👌👌
@sonyahelms6517
Жыл бұрын
So,,,,where do you buy the bearings? Asking for a friend of course.
@VacLab
Жыл бұрын
I get most everything from eBay. Just search the bearing number.
@Thevacuumenthusiast
Жыл бұрын
Hey vaclab just got a older bissell powerforce compact like the one you have, and the brush roll sound terrible. Thinking about replacing it most likely but also considering replacing the bearings (if it is the bearings), and I haven’t replaced a bearing in my life, could you help me please?
@VacLab
Жыл бұрын
You want me to replace your bearings?
@Thevacuumenthusiast
Жыл бұрын
@@VacLab well I’m in Texas and that would take a while I’m assuming. How much? And just fyi it makes a crunchy sound when I turn it
@VacLab
Жыл бұрын
@@Thevacuumenthusiast it's going to be cheaper if you just buy a new one rather than paying shipping both ways plus labor and parts.
@Thevacuumenthusiast
Жыл бұрын
@@VacLab thank you for helping! I’m probably going to find a cheap brush roll or find the kind of bearing and replace them. Thanks vaclab!
@edgaravelar2750
7 ай бұрын
Thank you much!
@MINHLATHANH823
2 жыл бұрын
❤️❤️❤️❤️❤️👍👍Hi. I'm from Vietnam, I'm looking forward to making friends. Your video is very good and helpful, I really like your video. thank you for sharing
@VacLab
2 жыл бұрын
Hello Thanh from Vietnam.
@brentcho1275
2 жыл бұрын
I see that crawling bug @ 2:44. 🤣
@VacLab
2 жыл бұрын
I was wondering when someone would spot that. 👍
@coryjohnson9081
3 ай бұрын
Just replaced the belt then bam another one down now im on KZitem
@dariuslavy3913
Жыл бұрын
Some people wait too long and have to buy a new vacuum or a complete roller.
@RampageTheGorilla
Жыл бұрын
What size bearings are you using I know they are 608z
@VacLab
Жыл бұрын
It's clearly mentioned in the video.
@guypawlak8762
6 ай бұрын
The 608Z bearings are 8mm Bore, 22mm OD, and 7mm W.
@Josegarcia-kl5nw
Жыл бұрын
great
@RayThackeray
Ай бұрын
Mine completely seized after only about a month and a few uses. What a load of crap I decided to take the vacuum back to Walmart.
@VacLab
Ай бұрын
Did you get another Bissell?
@dontblameme6328
Жыл бұрын
Used sealed bearings instead of just shielded.
@VacLab
Жыл бұрын
All bearings are "sealed", so I guess you mean rubber or metal seals then. 😁
@RyanRector1230
7 ай бұрын
Can you help me
@VacLab
7 ай бұрын
Do what?
@RyanRector1230
7 ай бұрын
I have a Bissell vacuum cleaner tats old
@VacLab
7 ай бұрын
@@RyanRector1230And you want me to do what exactly?
Пікірлер: 43