Make the donut!! Timestamp: 0:00 - Poliigon 0:20 - delete default cube (hotkey:X) 0:25 - add new object (hotkey: shift+A) 1:10 - donut shape (Add mesh > Torus) 1:35 - options for the mesh added 2:11 - recall the options menu (hotkey:F9; or just delete and re-add) 2:38 / 3:04 - make the donut thick (changing minor radius in option menu) 3:26 - changing major and minor segments (resolution of donut / amount of geometry) 4:55 - segments of the donut (40 for major, 16 for minor, < just for reference, can try with your own number) 5:41 - size of the donut 6:08 - properties of the object (the sidebar at the second right part of the screen); (hotkey:N) 6:33 - unit system (wacky imperial!) 6:58 - scaling (hotkey:S), 10cm/0.1m for reference 7:24 - apply the scale, should always be 1.0, otherwise everything will be messed up (CTRL+A to apply > Scale) 8:15 - remove jagged lines (shade flat / shade smooth), (select the object then right click) 9:05 / 9:42 - sub-surf / subdivision surface modifier (right part of screen > spanner > add modifier > subdivision surface) 10:37 - what is sub-surf modifier doing 11:52 - edit mode (1. hotkey:TAB; 2. Top left corner[Object Mode]; 3. CTRL+TAB ) 13:47 / 14:35 - add imperfect details to donut(make it bumpy), (hold shift to select multiple vertices, G for moving/grab) 14:44 - proportional editing (hotkey:O) 15:58 - proportional editing for trackpad 17:18 - problem while moving 17:51 - shrink and flatten (moving along normal) (hotkey:ALT+S) 19:20 - problem: why I can’t click on my camera? (object and editing mode) 20:05 - select random 20:36 - falloff type (beside the proportional editing)
@lucutes2936
2 жыл бұрын
just hide the cube don't kill it
@AdityaKumar-ij5ok
2 жыл бұрын
These comments are what TAs are to Profs, thanks!!
@antONorOFF
2 жыл бұрын
Thank you so much!
@mohammadfarhad1919
2 жыл бұрын
giving your time for free to save others time.......now that's what heroes do😜
@ayushdabhi5138
2 жыл бұрын
Great Job !! Very helpful
@alzamonart
2 жыл бұрын
For those stuck at around 15:20 with a keyboard without PgDn/PgUp keys: 1- Edit mode > Select a vertex in the donut 2- Press the G key, *then* scroll up and/or down your middle mouse wheel until the size circle appears so you can adjust it to your needs. Size determines surface affectation radius. EDIT: Make sure you have "proportional editing" turned on as in the video, otherwise it won't work. Has happened to me. ^_^! * I'm leaving this here for the next time I forget it, this was a personal peeve from Donut 2.0 tutorial :)
@pbezunartea
2 жыл бұрын
Thanks so much! very helpful!
@Alegar-rt2kr
2 жыл бұрын
I love you from the bottom of my heart! I've been stuck here for 15 minutes!
@TheOuterBox
2 жыл бұрын
Thanks, I was very confused what I was missing
@yousseftr7968
2 жыл бұрын
Thanks so much!
@joshrinker1514
2 жыл бұрын
I am still having trouble with and it's still zooming in and out instead. Also, then I got the XYZ around my vertices.
@babydragonbee1640
2 жыл бұрын
8:15 for anyone else who was stuck or confused because right click unselects all you have to do for the new versoin is select it and press w hopefully that helped one of you guys :)
@hopecrystalyt1143
2 жыл бұрын
Thank you sm! I've been stuck on this since yesterday
@thataliencon
Жыл бұрын
Omg you are a lifesaver 👍👍👍
@ceogizmo
Жыл бұрын
How do I pull up the context menu with a track pad ?
@harperscott9660
Жыл бұрын
@@ceogizmo Do you mean for laptop users? If so, here's what worked: Go to Edit -> Preferences -> Keymap -> Select with Mouse Button: if default is "Left", you set it to "Right". Go back to your donut and then right click.
@ceogizmo
Жыл бұрын
@@harperscott9660 hey thanks! it worked :)
@vittoriobertolino
Жыл бұрын
07:10 If you get stuck because of a "zoom limit" you have to go to Edit > Preferences > "Navigation" tab > "Auto" and checkmark "Depth"
@lonewalkerproductions
Жыл бұрын
Thanks!
@RRNNPP
Жыл бұрын
Thanks bro
@zonairar
Жыл бұрын
THANK YOU SO MUCH BRO ILY
@benwhite7005
Жыл бұрын
Top guy, i was about to quit haha
@sheerazanwar9773
Жыл бұрын
Thanks bro.
@spacedevice47
Жыл бұрын
Spent over an hour trying to get the proportional editing bit to work, to the point it was driving me insane. The bit that is missed is: YOU HAVE TO HAVE A VERTICES SELECTED, then press G. Then your scroll wheel alters the area size and moving the mouse moves the surface of the donut like in the tutorial.
@Braindead-Baby-Hazel
Жыл бұрын
Thank ya partner, I appreciate ya. * Non-platonic smooches *
@Waecholo
Жыл бұрын
I still got stuck, cuz I'm not getting the circle where you can adjust how the details are gonna look of the donut. ;w;
@lol_fire_2232
Жыл бұрын
thanks man just got stuck and searched in the commentary section to see if it was only me or just the new version i also relaunched a few times my computer and blender really thanks
@grimmaidentales
Жыл бұрын
But the ring thingy won't come 😭
@ursa525
Жыл бұрын
thank you
@render_dream33
2 жыл бұрын
10:21 If your donut disappears when you add Subdivision Surface. Click "Edit > Preferences" on the menu bar to open the Preferences Window. Then Switch to the "Viewport" Tab, click "Subdivision" and uncheck "GPU subdivision" below. Now the object should be visible.
@G1esas
2 жыл бұрын
Thanks man
@beacon382
2 жыл бұрын
Thank you so much.
@mariahbutner9772
2 жыл бұрын
OMG thaanks glad i came to the comments
@ThanhNguyen-tz1fp
2 жыл бұрын
Thank you so much bro. It took me a lot of time at this when the donut is disappeared. I'm re-making the donut for 2nd time and happy to came across your comment. Thanks a bunch bro!
@duskknight1815
2 жыл бұрын
Thank you so much
@hineko_
2 жыл бұрын
if your zooming in slows down after you scaled down the torus just do "View Selected"(with your torus selected hit tilde and then 3)
@kalakaarabhishek3669
2 жыл бұрын
Very Helpful
@corochan4682
2 жыл бұрын
Thank you, I was wondering why I couldn't zoom in. :)
@DustinAviation
2 жыл бұрын
this helped me so so much thank you
@tatolives4ever
2 жыл бұрын
Thank you!
@P3ACENATION
2 жыл бұрын
Hero
@s.j.carroll6185
Жыл бұрын
Great series so far! For those who got stumped at 14:45, try these steps: 1) Turn off the "snap" magnet at the top of the screen. The donut seems to be much too small for vertices to escape the gravity well of "snap". 2) Click on a vertex, then press G. 3a) Scroll whichever way makes the number in the top left corner of the screen (Proportional Size) get smaller. Eventually the coveted grey circle should shrink into view. 3b) Alternatively, left-click once, and go to the "> Move" option that appears in the bottom left corner of the screen. Change proportional size to 0.040. Move your cursor around, and hopefully the vertex will move, too! If not, maybe you need to do step 2 again? Hope this helps!
@ChocolatePink29
Жыл бұрын
Thank you sooooo much, you really helped me! I was going insane trying to figure it out 😅
@eunicelai220
Жыл бұрын
yes this one!!!
@rosalugorivera9868
Жыл бұрын
This is the comment that helped me get the ring to finally show on screen. I was stuck on that step for an hour... it was driving me insane lol
@Patobeur08
Жыл бұрын
This comment is GOLD !! thanks mate !
@GooglyMoogly420
Жыл бұрын
Thank you!
@gold_spin1639
2 жыл бұрын
An important tip from a fellow beginner, always create a folder for your projects and use save as to keep multiple versions of your models. Undo can only go back so far, so each time you delve into a new portion of your project, make a new version so you can go back just in case you make any catastrophic changes that you can’t back out of. Otherwise you’re gonna learn the hard way.
@_S_P_A_C_E_M_A_N_
2 жыл бұрын
Also: save regularly. Every time you save, blender automatically generates a .blend1 file which is your previously saved file. Just remove the 1 at the end of the extension and you can work on it. It's saved me a time or two.
@skii9333
2 жыл бұрын
Yep somehow I’m just realizing this after restarting for the 5th time.
@pacomatic9833
2 жыл бұрын
Noted.
@cyranetic
2 жыл бұрын
Learned this the hard way after getting the pt 4, not realizing I messed something up in pt 3, and having to start again at the beginning. Save a new file after completing each part, so you can easily go back to your latest correct version.
@cyranetic
2 жыл бұрын
Learned this the hard way after getting the pt 4, not realizing I messed something up in pt 3, and having to start again at the beginning. Save a new file after completing each part, so you can easily go back to your latest correct version.
@FarQuZeDesigns
2 жыл бұрын
Year 2060: Blender Guru has evolved to a donut and now exists inside of Blender 6.0 :D
@Diego-df4wf
2 жыл бұрын
He evolves into a donut then does tutorials on how to make a human
@UnidentifiedVisuals
2 жыл бұрын
BlenderGuruVerse 😂
@FarQuZeDesigns
2 жыл бұрын
@@Diego-df4wf Damn that one is even better :D
@Diego-df4wf
2 жыл бұрын
@@retrogamer947 this is deep
@anmolsharma832
2 жыл бұрын
LMAO
@LoganLovell
2 жыл бұрын
I'm an engineer who uses CAD every single day - but I've always wanted to get into more "artistic" modelling and rendering. When i found out Blender was free I immediately started diving in. This by far is the best tutorial series I've seen - and I love that you mix in humor and are casual while also being super clear on what you are doing, how it works, and what you might use it for. subscribed instantly
@khaimk4r4su
Жыл бұрын
stick to cad for cad. i am finding Blender extremely inexact and it needs elaborate shortcuts for things that are so simple
@lynic-0091
Жыл бұрын
A few years ago I finished your donut tutorial in Blender and was beyond excited. Then once I got to UV unwrapping I unfortunately gave up and quit because it was way too hard. Now I'm following your tutorial once again, this time I won't give up that easily. Your tutorials are still incredibly good. If you can explain a complicated program like Blender this easily, you're one hell of a teacher!
@fulltimefrontend
Жыл бұрын
same here, trying to learn blender, 5 years and counting !
@jgg2032
Жыл бұрын
What I like most about this series is that you are not PRESUMPTUOUS. You find no need to flex your knowledge and throw in terms that prove you know what you're talking about. That is what makes so many tutorials go wrong. We're here to learn about BLENDER, not here to learn how much YOU know about Blender. It is our first time touching this thing and you explain it with that as your foundation.
@ZenitsuKunn
Жыл бұрын
so true, well hows ur blender journey
@khaimk4r4su
Жыл бұрын
he sure loves to point out to invest in a mouse.
@steveschreiner7444
2 жыл бұрын
Actually, thank you for not having a expert tunnel vision, everytime when you said most people had this problem, I had the exact problem and you gave a solution for it. This is something rare and you deserve every single subscriber.
@visnau1126
2 жыл бұрын
Yeah totally, how he just knows the exact problems we are going to be experiencing is amazing and makes this tutorial so quality.
@CartoonyPirate
2 жыл бұрын
Almost as if the developers of Blender intended to make it user friendly
@timniebergall344
2 жыл бұрын
A university of a friend of mine tells their students to go watch these videos to learn blender. This man single handedly raised a new generation of designers.
@solo8734
2 жыл бұрын
Its amazing how videos can often perform perfectly as lectures compared to actually sitting down in a classroom setting. Listening to someone lecture about blender. Imagine having to take notes of this stuff without having to use a computer.
@pandaexpress7673
2 жыл бұрын
@@solo8734 yeah somewhere along the way learning was defined as going into an education institution but really you can learn just fine anywhere, on your own with the right guidance
@JayJoeVid4EVER
Жыл бұрын
Not even on the third part and I can already think of ways to incorporate what I've learned in order to make some things I had in mind. What a great teacher.
@Thesierrashow
2 жыл бұрын
Seriously the greatest beginner tutorials on KZitem. I've never gotten so hype to see a tutorial channel upload
@joysavvy
2 жыл бұрын
Same here 🍩
@gami220
2 жыл бұрын
same here
@novavortex7763
2 жыл бұрын
I kind of disagree he can be quite chaotic at times. I'm not a beginner I've done stuff already and getting better at it, I think Grant abbitt is clearer then Andrew.
@captaincrispy2184
2 жыл бұрын
@@novavortex7763 I agree. Andrew is a great guy and the tutorial is super useful and a wholesome part of the community. But in terms of clarity, the CGBoost's Apple Tutorial would be my top recommendation.
@Thesierrashow
2 жыл бұрын
@@novavortex7763 Really? I think that's his hook. I'm no longer a beginner either but as someone who started with donut 2.0 fresh out the gate his personality and conversational tone kept me entertained enough to watch the whole series. It'd be pretty hard to someone who's laser focused on teaching and taking it slow for hours.
@Vinnyguy707
2 жыл бұрын
Thank you so much for this! My son is 8 years old and he followed you step by step. He had minimal help from me. He finished he donut and was so excited. Teaching an 8 year old this stuff truely speaks to your teaching method. Again, thank you.
@visnau1126
2 жыл бұрын
That is so awesome, with him starting at 8 he will be an amazing 3d modeler if he sticks through it, I am a bit jealous of him!
@Gekoloudios
2 жыл бұрын
well this is wholesome
@tyg715
2 жыл бұрын
😦😕😕
@CaroleeGernhardt
2 жыл бұрын
I'm so impressed, I've been making my donut for 3 nights now!
@mariosion
2 жыл бұрын
That is AWESOME! Wish I was that kid lol, I could draw stuff on paper, but 3D modeling at that age, that’s wonderful.
@BorislavJordanov
Жыл бұрын
13:39 If when you press "G" the whole object moves even though you have only 4 vertices selected, it's because the radius of proportional editing is too big! To change the radius, use the scroll wheel down and scroll like crazy. Don't get discouraged. Eventually, a circle will appear!
@portgasdami
Жыл бұрын
I have that problem, and I scrolled down like hell until I could no more, no circle appeared and the dang thing still kept moving...
@BorislavJordanov
Жыл бұрын
@@portgasdami, Please try changing the scroll's direction and look at the units in the top left corner.
@sohanalva
Жыл бұрын
THANK YOU!!!!!!!!!
@Markv22
Жыл бұрын
I was stuck on that haha, thanks you very much!
@tegansimmonds5397
Жыл бұрын
thank you thank you thank you!!!
@shoheikomatsu954
Жыл бұрын
If you're stuck in 15:19 , Since you made the donut small the selection area (the circle thing ) needs to be the same size as well. Just press the proportional editing button, select some mesh, press "G" and scroll till you see the selection area.
@raychell1
Жыл бұрын
it doesnt work... :( oh! nevermind, the circle goes smaller as i scroll up , not the other way around. thank you
@WorldWarFanatic1123
Жыл бұрын
Thanks a lot this has helped me really well ❤
@haouariabderrahime6287
Жыл бұрын
You r hero...
@amandalimaribeiro9718
Жыл бұрын
It worked for me, thanks a lot!
@AquaUu
Жыл бұрын
YOUR A LIFESAVER DUDE THANK YOUUU
@RelaxingTime258
2 жыл бұрын
When your mesh (torus) is small and you are struggling with the zoom or rotation view, just select your torus and click "~" under the Esc button and go to "view selected" or 3, and you can rotate or zoom your mesh (torus) now without any problem.
@perico0507
2 жыл бұрын
Thanks! I couldn't zoom in enough. I thought I would have to just work with a 1 meter donut to actually see what is going on haha
@SylviaEvilKitty
2 жыл бұрын
THANK YOUUUU!! Man, this was a very specific command that I had difficulty googling hahaa
@esoterictaxcollector9556
2 жыл бұрын
You're a lifesaver
@ryanmcc09
2 жыл бұрын
dude thank you i was getting very frustrated
@kspayton
2 жыл бұрын
ty so much! this has been bugging me for weeks! XD
@longboi4007
Жыл бұрын
For those tract pad users like me who are stuck at 15:22 press w to change your selection type press w until you see a circle in your cursor it means your selection type now is for vertices then select a vertices and press g then use two fingers and scroll up it should work the same way like the mouse wheel. Just scroll up till you see another circle its a little darker than the selection circle then just look at the top right corner for the proportional size and adjust it to 0.004 it doesn't have to be exact. Another tip to select multiple vertices this can work for both laptop and pc users just move your camera angle where you can see the side you want to adjust then try to capture multiple vertices inside the selection circle then press g adjust it to your desired proportional size and move it how ever you want! _(´ω`_)⌒)_ sorry English isn't really my mother tongue so sorry for any grammatical errors you see just wanted to help : )
@dennismichelsen4936
Жыл бұрын
I dont see the vertixes
@dennismichelsen4936
Жыл бұрын
Fixed
@Discovering_aryavart
Жыл бұрын
Really stucked and you come to rescue
@halouiyoussef2005
Жыл бұрын
This doesn’t work :( i m on macbook
@246o1-y1i
Жыл бұрын
Thank you!! Was using a mouse just for this purpose.
@Elusive519
2 жыл бұрын
00:13:36 For those experiencing trouble moving vertices, try turning off snap. It's the little magnet icon under the "Animation" tab. Since the donut is small compared to the grid, if snap is accidentally turned on you need large movements for any changes to occur. Hope it helps.
@travisbutler909
2 жыл бұрын
you just saved me from a mental breakdown lmao
@slumgarner6224
2 жыл бұрын
I can only move my donute... 'snap' is turned off
@Elusive519
2 жыл бұрын
@@slumgarner6224 you need to go into the edit mode. Press Tab
@pauldesaintalbin6693
2 жыл бұрын
Thanks a lot! I was searching in the comments to see if anyone has the same problem... Now I can continue the tutorial
@istahke4071
2 жыл бұрын
bro i was going to pop off no cap
@astridfinley7763
Жыл бұрын
21:16 when you are doing scale you need to change the size (1 in/0.1 m) first and then make sure you click the object before pressing ctrl + a and locking the scale.
@kellykurui2454
Жыл бұрын
thanks
@ultratabby9380
Жыл бұрын
thank you
@coniker979
2 жыл бұрын
at 8:30 you can also use the 'W' key to open the object context menu
@TheJayarmor
2 жыл бұрын
w mans
@arghhhhh8795
Жыл бұрын
Thanks
@noelanibond9672
Жыл бұрын
I WAS ABOUT TO HAVE A MENTAL BREAKDOWN THAAANNNKKKUUUUU
@kkm870
Жыл бұрын
@@noelanibond9672 us fr😭😭😭
@suprabhasoyali-pm1rq
Жыл бұрын
Thankyou so freaking much 😭🙏
@ghufranahmad5730
Жыл бұрын
I love how jolly and light-hearted you are as a teacher!
@yoshirin7871
Жыл бұрын
kaboom
@Elden-Bear
Жыл бұрын
@@yoshirin7871 wow so funny anime fan, i definitley didnt cringe
@mrhobojim6098
Жыл бұрын
@@yoshirin7871 cringe
@richardmatthis3795
Жыл бұрын
I bought a book that was a tutorial for blender many years ago. I installed it and immediately gave up because the program is much smarter than I. Fast forward 15 years or so, I found these videos and decided download the latest version and give it another try. You make learning much more fun and simplify the process. I don't even mind the joke about us Americans. Lol I will definitely support the channel and the advertisers so that more great videos can be created. Thanks!
@bint_muhammed3555
2 жыл бұрын
@8:32 ok so at first for me, the right click wasn't working, by the way, mine is a Dell 10 Pro PC. I did a bit of researching and found out that you can pull that up with the "W" hotkey as well (as long as the donut is selected.) Hope this helps for anyone who needs it :) Also. @16:03 if you can't find the little ring size too, just select the donut then click on the O hotkey, something should popup in the bottom left corner, where you can adjust the size to 0.04.
@julienpassler6455
2 жыл бұрын
thanks man :D
@ALPHA-zx5ep
2 жыл бұрын
Thanks!
@grustno1812
2 жыл бұрын
exactly what i needed, cheers!
@real-is-real8877
2 жыл бұрын
thanks alot dear
@nurunmuhammed7678
2 жыл бұрын
@@julienpassler6455 no prob julien!
@dzomlamasina1560
2 жыл бұрын
So nostalgic ... I watched you Andrew back in 2014 and learned, I stopped I started again last year stronger than ever! I studied 4-5 hours a day with you most and others..I earned $ 200 as a beginner! Thank you very much
@thomasdahwoodjr4600
2 жыл бұрын
just a bit curious, i'm also a complete beginner at blender and can you shed some light on the best and easiest way possible to earn money as a beginner?
@dzomlamasina1560
2 жыл бұрын
@@thomasdahwoodjr4600 I look for jobs on upwork and.earn
@thomasdahwoodjr4600
2 жыл бұрын
@@dzomlamasina1560 thanks for the tip mate
@sethmossberg7045
2 жыл бұрын
I know a TON about Blender, but I'm watching it all over again the same way you watch a long awaited sequel
@TwistingArcane_Viewer
Жыл бұрын
2 helpful pointers: 1. You don't have to Hold G. Make sure you have an object/objects or in edit mode a vertex/vertices selected then just press the key once and the function will be toggled. this applies to other hotkeys like Scale, Move, and Rotate that I know of so far. Also you can lock any of those actions to an axis with x, y, or z and in some cases you can press the key a 2nd time Ex: when in edit if you have a vertex selected and press G to grab then press G again you will lock that vertex movement along only lines that connect to the selected vertex. (note I'm like 2 days into blender and have no prior experience with other editors so have yet to really explore.) 2. Super useful for people with a laptop and track pad that may not have figured this out. Also may not apply to all track pads I guess. However if you can scroll on you track pad with 2 finger swipes like I can the you can effectively achieve the same result as holding down the middle mouse key. I find it to feel rather natural honestly.
@acehydra3136
2 жыл бұрын
Heyy...Andrew....you probably wouldn't know me but i am also one of the thousands who watched your donut series.....it was one of a kind journey. I was trying to learn blender for 2 years without even being able to open the software. The best teacher in the world, Andrew Price...The one who is know as Blender guru came in my life. Thank you soooo much for all this. I was soo hyped that there was gonna be another one.....You are the best...Thx for all of this:)🥺
@vak5461
2 жыл бұрын
Wow... I've been using blender for 3 DAYS and this tutorial is like seeing God. I became slightly obsessed with Blender (very fun) and started out of my bounds with Grease Pencil but it gave me some spark. Now that I found your series I feel solid!!! I knew a lot of the small details but learning the way you are teaching is so cohesive and all encompassing it's very helpful to put all the mess in my brain in order. I have a couple things I do want to make, but I think I need to keep on doing these basics to get where I need to be. THANK YOU so much! I wish I could buy you a doughnut in person haha.
@mukinha
2 жыл бұрын
14:45 For those who the proportional editing is not working, click in the magnet icon to deactivate the snap settings.
@eustace1631
2 жыл бұрын
Was looking for a comment about this thank you!!
@mukinha
2 жыл бұрын
@@eustace1631 you're welcome ;)
@mvegas9552
2 жыл бұрын
thanks man
@zack7851
2 жыл бұрын
needed this, thank you
@MachineGunJelly584
2 жыл бұрын
Thank you!
@ItsNattyCakes
Жыл бұрын
i spent HOURS trying to figure out everything so when i searched it up and found you, i finally figured out how to use blender for my own projects and little decorations for my 3d printer to print out, thank you a lot for making these videos and keep up the work!
@hazmatbp
2 жыл бұрын
For those that don't know, a way quicker and easier way to do Subdivision Surface modifiers is to hit Ctrl+The level of subdivision you want. For example, if you wanted 1 level of subdivision you'd do Ctrl+1, for 2 levels you'd do Ctrl+2, etc.
@csy_x5063
2 жыл бұрын
That's great, thx
@blenderguru
2 жыл бұрын
Yeah I avoid showing that this early on because I want people to see how modifiers work.
@hazmatbp
2 жыл бұрын
@@blenderguru Good idea, I only recently found out about it and had been doing it the long way for years, and I didn't want anyone else to waste time unnecessarily.
@simeyonsmith4312
2 жыл бұрын
@@blenderguru for the object control menu, I don’t have that option on my mouse when I click right. It’s on select. Can you please help me with that so I can make it smooth?
@punkson
2 жыл бұрын
@@simeyonsmith4312 It sounds like you have the old settings (right mouse button to select). Go to edit in the toolbar, keymap on the left, then in preferences make sure you have selected: Select with mouse button: Left
@90snebula
2 жыл бұрын
I've been working on this for the past couple hours and it's been so helpful so far. I'm an interior designer and I've learned a lot of programs so far from school projects and I wanted to add blender to my roster for it's wide range of use. I'm really excited to explore the possibilities of blender and explore design through it. Thank you !
@blenderguru
Жыл бұрын
Stuck? Join the new Blender Guru Discord to ask for help or just hang with other Blender users: discord.gg/c3B2sZDsam
@xegrandclips
Жыл бұрын
Woah , that's great. Its gonna be really helpful I have tried the old Donut tutorials in the past , but I always get stuck and never make it till the end. My exams are over, and I finally have time to start over again . Hoping to complete it . 😊
@aquamufin8783
Жыл бұрын
how zoom in so close?
@Teo117
Жыл бұрын
The invite expired, is there another one? I'd love to join. I'm kinda stuck on something goofy. I can't zoom in past a certain point. I saw you use a hotkey to recenter, though I don't know what it is. Help?
@Teo117
Жыл бұрын
@@aquamufin8783 ikr same
@bunniblossomss
Жыл бұрын
@@Teo117 I am having the S A M E issue. 😭😭
@Beobout6
Жыл бұрын
Your tutorials are so well organized, they are quite amazing. I really appreciate the free HOT KEY list in part one and advice for beginners. This is my first stab at 3D and I look forward to continuing these lessons. Thank you. USA
@quantumz4625
Жыл бұрын
Simple, effective, explanatory, and un intrusive sponsor segment. That’s how they should all do it. Good job on yours
@maxxxmodelz4061
2 жыл бұрын
Instead of using proportional editing to change the shape of the doughnut, I like to add a displace modifier above the subd surface modifier and add a clouds texture to it. Then just adjust the settings to a very small amount on the clouds texture, and then adjust the scale of the displacement until you have what you like. Then just apply the displace modifier. It usually gives a very realistic deformation to the doughnut.
@Motivated_manu
Жыл бұрын
not gonna lie, this is one of the best if not THE best tutorial series I've ever seen so far! thank you so much for this wonderful series! :D
@ghhn4505
Жыл бұрын
This is actually so sick, it feels like messing with clay but with more precision and I can already tell I'm going to enjoy 3D Modeling. Thank you.
@SmokeandSpirit
10 ай бұрын
Then, if you want the lack of precision and enjoy the claylike aspects, the sculpting tab has clay like sculpting functionality with all it's squishy goodness.
@ZenithWest169
Жыл бұрын
NOTE: Something left out from the former tutorial is that subdivision modifier does not permanently modify the underlying mesh and can be removed or changed at any time. The modifier is applied after/during editing the mesh, so even though it looks like it has more segments visually, when you turn on edit mode to see the vertices they aren't actually more of them. This is useful for keeping the number of vertices you have to manipulate low while creating a highly detailed model. (So I've finally settled on sitting down and learning blender... Started the other day with the same tutorial but was on the blender 2.8 from 3 years and realized this is the newer one. I stopped around part 6 and decided to restart on this newer one. Anyway, I just wanted to provide this note as I thought it was useful to know from the previous tutorial).
@keyrinq
Жыл бұрын
Thanks!
@Rare.99
Жыл бұрын
yeah i had to figure that out on my own
@malik82898
2 жыл бұрын
Seriously thanks for making the things you do. Over the past year or so I've found myself in a bit of a frustrating rut when it comes to further improving and enjoying my primary creative outlet, which is digital illustration. You've made it incredibly fun, exciting and easy to break into this new artistic medium that is 3D, and I can't thank you enough for it. I've done your 2nd donut tutorial twice and am thoroughly eager to complete this one as well.
@blenderguru
2 жыл бұрын
That's awesome to hear, glad it's helpful :)
@jubrillawal313
2 жыл бұрын
Can we use blender on mac for free?
@annieworroll4373
17 күн бұрын
Love the emphasis early on about using the simplest mesh that can get the job done. One of the things I'm going through these videos for is to create stuff in Second Life, and the optimization differences... I've had my avatars hair, switched to hair that was very similar visually and cut my avatars overall rendering load nearly in half. JUST FROM THE HAIR. And the new one was even more aesthetically optimized. It's absolutely wild how much of a difference there is and it's good getting that sort of habit from day one.
@clearsky4455
2 жыл бұрын
The best tutorial on KZitem… hands down.
@aerofart
Жыл бұрын
TIP: PROPORTIONAL EDITING FALLOFF ADJUSTMENT (SCROLL WHEEL) needs to be used while the left mouse button is held down and you are in the process of transforming (moving/rotating) the vertex. This had me confused at first because I was scrolling the mouse wheel and the only thing that was happening was that the viewport was zooming in/out.
@ctucker3773
Жыл бұрын
Thank you! I was stuck for like an hour with that exact issue.
@_CARKENT
Жыл бұрын
I am still confused on this part. It just zooms in and out
@_CARKENT
Жыл бұрын
i fixed it
@netacklee
Жыл бұрын
Thank you, i was really confused about it
@Ofstudiofae
Жыл бұрын
Thank you. I had the same problem
@twoturtles7886
2 жыл бұрын
TRACKPAD USERS LOOK AT THIS! You don't need to do the whole messy workaround at about 15:40 ; just scroll up and down (as you would on a webpage) and you can increase/decrease the size of the ring and everything. Fantastic video, man! Thank you for this.
@kwabecikuwu9161
2 жыл бұрын
just buy a mouse
@davidpower5710
2 жыл бұрын
@@kwabecikuwu9161 some people don't have money for it so please shh
@kwabecikuwu9161
2 жыл бұрын
@@davidpower5710 you can't posibbly be so poor, if you are get a donation for the poor, in any civilazied country there is one
@tonyjohnson1227
2 жыл бұрын
The scroll wheel doesn’t work for me… and it seems some others. Maybe it’s a mac/pc thing?
@JotoheKian
Жыл бұрын
For those who cannot scale donut at 7:09, unless in edit mode, press period "." key on the keyboard and uncheck option "Only Locations", then reclick on your donut and try again. Edit: my mistake, that's a period key, not comma, thanks!
@JotoheKian
Жыл бұрын
@@Colesia Oh dear, you are right! Thank you for the correction!
@ralphnabnas
11 ай бұрын
Legend!
@Maestro_J
10 ай бұрын
Made my day!
@JotoheKian
10 ай бұрын
@@Maestro_J Glad to hear that!
@zacharyklein9520
2 жыл бұрын
I remember watching the 2.8 donut as my first blender tutorial. He still hasn't learned if it's a wrench or spanner
@javatyro1
2 жыл бұрын
A spanner is just a type of wrench so either one technically works
@blenderfox_foxwastaken
2 жыл бұрын
Yeah. The 2.8 donut was also my first tutorial, and last time he basically called it a wrench, then asked himself if it was actually a spanner
@SebBrosig
2 жыл бұрын
Wrench is American English so then you have to measure it in inches and feet...
@edherdman9973
2 жыл бұрын
I see Imperial has evolved from inches and penny-farthings to periwinkles!
@mrln968
2 жыл бұрын
YES I KNOW LOL
@sungjuyea4627
2 жыл бұрын
Part2 Summary - for personal use Adding objs(0:28) - shift + a - delete) just x Obj Params(1:40) - click the left bottom corner's 'Add Torus' button - once you add a mesh and do sth else, the button would be gone - bring it back?: f9 - tip) about resolution - it is hard to go back to when the resolution was low, so it is better to start from a low resolution - high resolution: slow runtime, hard work(to many surfaces) Real world measurements(5:38) - short key n: properties like scale, rotation, etc. - change units: scene properties > units > unit system Applying scale(7:24) - ctrl + a > scale (then the scale for all the axes will become 1) Flat & smooth shading(8:15) - default: flat - smooth: right click > shade smooth Subsurf modifier(9:43) - how to fix some jaggy silhouette?: subdivision - modifier properties > add modifier > subdivision surface Edit mode(11:52) - shortkey: tab - move and twist the vertices to add some details Proportional editing(14:47) - proportional editing: o - adjust the scale of proportion(when you don't have a scroll wheel): push g and click, then click 'move' button at the left bottom corner > adjust 'scale'(around 0.03~04) Shrink/Flatten(17:55) - moving a part of the donut along the direction the face heads in: opt + s - (note) in the edit mode, you cannot select anything but the obj you're editing Select random(20:05) - select > select random: randomly select some vertices from your mesh - adjust proportion shape: choose the button right next to the proportional editing button
@katharinafiedler3191
Жыл бұрын
For me there is no ''Add torus button" on the bottom left corner and its so annoying I cant find a solution :( because without it i cant advance :(
@kaiagaia
Жыл бұрын
@@katharinafiedler3191 same :(
@Jalliani
2 жыл бұрын
when i watched the first series and heard the joke of the imperial metric system, i knew i found the right place. Tnx andrew for all the knowledge u share
@chadster111
Жыл бұрын
Timestamp: 14:58 For anyone who is stuck on the proportional editing part due to the circle NOT appearing, it is because of the following and a very easy fix. - check your pivot point (the period on the bottom left of your keyboard) - tap the key and then press G like you normally would, finally zoom in completely and scroll in a backward direction and the grey circle should finally appear. I hope this helps cause this is how I solved it for myself. - Additional Notes: the hotkey for the proportional editing is O. MAKE SURE you have clicked a vertices point and have pressed G also, which then would normally make the circle appear. If this is not working then try the following steps I provided above. If that doesn't help, I'm sorry, I can be of no further help.
@هخخخ-ن9ط
Жыл бұрын
thx
@chrislive1586
Жыл бұрын
this helped, thanks!
@BLUE-india23
Жыл бұрын
u saved my life bruh
@ronarmengol1677
Жыл бұрын
thanks that worked
@zobo4254
Жыл бұрын
THANK YOU! I got so stuck
@yaseennoor6250
Жыл бұрын
6:35 I'm not American, but just mentioning this in your tutorial and making wacky jokes like that is the sole reason you got yourself a new subscriber. Other tutorials are just too bland but yours is entertaining and informative. Thank you so much.
@adamc4443
Жыл бұрын
I've been debating metric > imperial with my American friends for years. Loved this part as well! 😂
@BipityBopity93
Жыл бұрын
I’m an American, and I thought it was hilarious. Lol
@NahImGoodChief
2 жыл бұрын
for 8:30 right click and then at the top bar where it says "object" in that menu you can enable smooth shading
@rutgerwoolderink6770
2 жыл бұрын
Your amazing
@NahImGoodChief
2 жыл бұрын
@@rutgerwoolderink6770 no problem, i didn't want others to spend 30 minutes looking for a single button like i did
@logakkgamer8304
2 жыл бұрын
Thanks, wondered where it was
@moldymoss3991
2 жыл бұрын
I’m so lost here I did it yesterday but this time right click does nothing? It only highlights the donut..
@cor8579
2 жыл бұрын
@@moldymoss3991 You can enable Smooth shading from opening the toolbar (Shortcut is "T") Tools->Edit->Shading Smooth. Make sure the object is selected.
@roesti6214
2 жыл бұрын
These tutorials are awesome! Sometimes I'm a little upset because you do things to show more details and don't explain them, but in the end the level of details and amount of shortcuts thrown at the viewers is perfect. Go on exactly like this!
@taunttitan1714
7 ай бұрын
Ha you know i love to rewatch these nit only because of how informative these are but how funny it is as well
@lukeh9300
2 жыл бұрын
A really useful new feature you may have missed is the hotkey for subsdivision surface modifiers. Its control + the number of levels you want.
@asthalis
2 жыл бұрын
nothing really new about this...
@c1borgen
2 жыл бұрын
@@asthalis for beginners every tip is very essential
@oskrm
2 жыл бұрын
@@c1borgen as in, for someone new, everything is new, or why even tell them to press G to move? it's not new.
@c1borgen
2 жыл бұрын
@@oskrm yes, when I was learning photoshop the most of youtube teachers were speaking like I should have known somehow every shortcut, so I have to watch unpopular hours long videos with explaining of every action
@Lumbrax
2 жыл бұрын
@@c1borgen if you are just starting then I recommend you this tutorial: kzitem.info/news/bejne/qq-IxamPrISVg6g its the best one I saw when I was learning photoshop as a complete beginner.
@justseelemonina
2 жыл бұрын
6:42 "9.9 periwinkles" i was so focused and LOST IT hahaha
@brandonjacksoon
2 жыл бұрын
AWESOME! Congrats on almost 2M subscribers! Thanks for all your tutorials!
@chaunskiez
Жыл бұрын
just started today, i've been a designer and an editor for more than 5 years but this is making me smile all the way like a maniac
@nathanfairbrass406
2 жыл бұрын
I just love that it's not the first time I've heard Andrew ask if it's a wrench or a spanner.
@lyraheartstrings6248
2 жыл бұрын
In geometry, a torus is a surface of revolution generated by revolving a circle in three-dimensional space about an axis that is coplanar with the circle. If the axis of revolution does not touch the circle, the surface has a ring shape and is called a torus of revolution...or a donut !
@blenderguru
2 жыл бұрын
TIL. Thanks :)
@vehicularcountryball6614
2 жыл бұрын
@@blenderguru lol
@pelag1137
2 жыл бұрын
its also called kakyoin
@93kwaj
2 жыл бұрын
1:50 If anyone is having trouble with the small object parameters box disappearing after clicking away, you can get it back by clicking on the mesh, then going to Edit > Adjust Last Operation. Alternatively, you can press on the mesh, and then press F9 on the keyboard.
@Kbabknight
2 жыл бұрын
Thanks bro :)
@cretinatube
2 жыл бұрын
Still not showing up for me at all, any idea why
@Kookiez3
2 жыл бұрын
@@cretinatube Same here :(
@ldn6916
2 жыл бұрын
Merci !
@noblephantasms7250
Жыл бұрын
Thanks bro!
@김동주-y5f
Жыл бұрын
15:20 Edit mode -> Select one random vertex in your donut -> Press "G" -> scroll-up until you can see your donut moves as like this video(while scroll-up, keep moving your mouse. then you can see its shape is changed)
@Wishmask9
Жыл бұрын
THANK YOU SO MUCH!!!
@iadag6293
Жыл бұрын
THANK YOU❤
@mikeyt2022
11 ай бұрын
It worked finally, thank you so much!!!
@yash8904
2 жыл бұрын
15:46 SCROLL NOT WORKING !! -> people cannot see the circle because the donut is very very small -> just select some vertices -> press G and click anywhere that'll pop a little menu on left bottom -> there decrease the proportional size (like REALLY LOW) ->then you should be able to see the effect
@toriwang5844
Жыл бұрын
For the Proportional part, you have to hold down the left mouse button and then scroll up at the same time. After a while, the circle thing will appear. At first, the whole donut will move together, just keep scrolling.
@NiniSufle
Жыл бұрын
THANK YOU SO MUCH OMG
@billmckee3230
Жыл бұрын
In my case, I just clicked on a vertex, clicked on "G", then just used the mouse wheel - did not have to hold the left button down.
@Lila_Moon
11 ай бұрын
Your comment saved me, bless haha
@murielpatel9345
Жыл бұрын
I had a hard time making the bump on the donut in part 13:37 mn but in fact it's just because my SNAP icon (The little horseshoe at the top) was activated. You have to disable it for it to work. We then click on the G button on the keyboard and play with the mouse to increase the little bump!
@JoseMartinez-pd9dc
Жыл бұрын
thank you! i was wondering why it was making such dramatic bumps!!! appreciate it!
@lyndseyboggs3930
Жыл бұрын
You're a saint, thank you!!
@elliswilliams7487
Жыл бұрын
horse?
@studio_gimbap
Жыл бұрын
thanks!
@scottconover90
10 ай бұрын
THANK YOU!!!!!!!
@amitdhawan579
Ай бұрын
Day 2 of Blender for me and I must say I'm enjoying your style of tutorial. Your vibe is cool and your teaching is clear.... looking forward to getting through it ial!
@carterbellew4097
2 жыл бұрын
Yesterday I downloaded blender and found your old donut tutorial, and I'm nearly done with level one. Thanks very much for the great videos!
@rybotnik
Жыл бұрын
i didnt know i wanted to get into 3d modelling until i stumbled accross your videos. You're a great teacher!
@sarthakdutta5146
2 жыл бұрын
"Imperfection is the digital perfection" Blender guru - 2019
@danieljamesmead
Жыл бұрын
Im just starting to explore blender. I instantly like the way you present yourself and the tutorial and I can't wait to get going on this journey with you.
@solomonlamb
2 жыл бұрын
If you're still stuck at 15:20, just zoom out a bit, make sure you're in 'edit mode', selected a vertex and press G. Then scroll UP, and on the top left you'll see the proportion size (in meters) lower. Continue until it is fixed to your desired size.
@bladerunner4425
2 жыл бұрын
b****! thank you!
@saraloking5993
2 жыл бұрын
Thank you, I could not figure out what the heck was wrong with my mouse. Zooming out was the solution!
@Bubbleheist
Жыл бұрын
I was stuck and this made me unstuck, thankyou sm
@Sfo97
2 жыл бұрын
imperfection is the digital perfection - abraham lincoln
@alejo8528
2 жыл бұрын
Man, the comment on 6:50 is hilarious. loved it. the rest of the world... 😅. really nice tutorials btw.
@Restlessab
Жыл бұрын
I'm really shocked and thrilled at the same because of how easy this man makes it look!
@jixal
Жыл бұрын
The proportional fall off bit be very confusing as you are super zoomed in, and its default is for bigger objects. You can see the giant ring easier if you zoom out temporarily, might help understand what's happening at the time!
@seb18456
Жыл бұрын
While at the proportional editing part, I got stuck because I would try and obviously change the proportion, but it wouldn't budge no matter how many times I moved my cursor. So if you are stuck here, I may have the solution for you. Make sure that in the bar where you turned proportional editing on, the magnet icon is disabled. It is a little to the left of the proportional editing circle. I might have pressed it on accident at some point. Then continue working by selecting a vertex, pressing G, and hopefully getting it to move. I hope this helps!
@jothain
Жыл бұрын
Thank you for this comment. I was struggling and wondering why to selection radius isn't affecting anything. I had the magnet selection on too.
@ilovedobin5864
Жыл бұрын
FOR PEOPLE WHO SUFFERED ON 15:43 LIKE I DID SO BASICALLY HOLD DOWN G THEN SCROLL UP AND IT WILL EVENTUALLY APPEAR YW
@lilianaxs
Жыл бұрын
THIS WORKED TYSM
@karatekidfahim3
Жыл бұрын
yooo this worked for me, thanks for the help king👑
@fagiolocosmico4739
Жыл бұрын
I love you
@tuckisananimator3977
Жыл бұрын
idk what im doing wrong
@wonderboy8975
Жыл бұрын
thanks
@Zero-wl7oe
10 ай бұрын
Probably the clearest and easiest to understand Tutorial i've seen yet. Many thanks.
@Temmie_Dola
2 жыл бұрын
16:00 There is also a chance that you selected a transform pivot point relative to the 3D cursor, so this circle will be in the same place as the cursor. I get caught up in this a lot when I can't figure out why there's no circle
@Zyrose_Kun
2 жыл бұрын
how do I move circle it just sits still and the donut moves
@Temmie_Dola
2 жыл бұрын
@@Zyrose_Kun the circle should not move. it appears where vertexes have been selected
@Rocket_browser
Жыл бұрын
me watching how to make donut video to eventually make an overwatch animation in future
@bluerediits
Жыл бұрын
Newcomer to blender. Following all your actions step by step, and I'm learning a lot! Thank you so much for making such a well-known and helpful tutorial, taking time to teach us all the inside tricks like hotkeys. It's also quite funny and entertaining. As an American, I absolutely lost my mind laughing at "9.9 periwinkles" for our "wacky imperial" system.
@akhilp3177
11 ай бұрын
hey just following up , how far have you learnt now. And in what way has it been helpful to you. Please lmk ~ fellow new comer
@bluerediits
11 ай бұрын
@@akhilp3177 hey there! Sorry to say I stopped learning. I switched to learning digital art a few months back which is more my speed. However, this tutorial helped me learn a lot of stuff about blender including basic functions, hot keys, and the process needed to do this stuff. If you’re wanting to learn blender, this series is the way to start.
@akhilp3177
11 ай бұрын
@@bluerediitsalright man, thanks for letting me know. A whole lot of tutorials out there , Tough to pick. Thnx for confirming
@bluerediits
11 ай бұрын
@@akhilp3177 ofc man! Best of luck on your journey!
@phattran262
Жыл бұрын
I just wanted to say that I really like the way you explained. It is very friendly.
@iLLHouseGames
2 жыл бұрын
After making the donut lumpy if you use the random selected vertices and scale down a bunch with the shrink/flatten you get a pretty nice onion ring
@bettercalldelta
2 жыл бұрын
Making a donut in real life: I wanna make this as perfect as possible! Making a donut in blender: I wanna make this as imperfect as possible!
@DrunkenUFOPilot
2 жыл бұрын
That's why making things in real life takes a long time, and also why making things in Blender takes a long time.
@arnoldson1950
2 жыл бұрын
society
@nico-s5k
2 жыл бұрын
"Really guys, invest in a mouse."
@Spicyicecream-e9t
Жыл бұрын
No
@SucksAtGames12
Жыл бұрын
6:45 is absolutely hilarious. things like this make this more fun when learning
@GabbyGoretastic
2 жыл бұрын
I'm still struggling with the vertex editing, no matter which way i scroll it doesn't show any kind of circle. Even when it shows a selected vertex, when I press g, it grabs the whole donut to move. Proportional editing doesn't seem to do anything.
@Froscho5944
2 жыл бұрын
Same for me, the proportional editing moves the whole object instead of just a few vertices
@SpikeyWombat
2 жыл бұрын
@@Froscho5944 Same here so I tried selecting a face, that still didn't work but when I went back and left clicked on just one to select it then pressed G it worked, now it works every time. I'm not sure what I did wrong to start with but hang in there a play around you will get it.
@diggpen1249
2 жыл бұрын
You have to have a vertex selected, then hit G for move, and while in move mode scroll in and out with proportional editing on (hot key "O") I had the same issue.
@kaceyjpoulsen4938
2 жыл бұрын
@@diggpen1249 I had the same problem and your tip fixed it. Thanks!
@alanax2
2 жыл бұрын
I'm having the same problem! Thank you for commenting lol ^^
@dhopkin79
2 жыл бұрын
10:18 Mod properties - dropdown menu - Sub surface... you can right click on the sub surface modifier and add it in your quick favorites. You can pull it up later by hitting the "q" button.
@clairbender
2 жыл бұрын
My blender keeps crashing when I get to the subdivide surface part. Anyone have ideas as to why?
@djkingpersia
2 жыл бұрын
same here wtf anybody have an answer i want my ish smoooth!!
@djkingpersia
2 жыл бұрын
hey claire did you figuire it out??
@clairbender
2 жыл бұрын
@@djkingpersia edit>preferences>viewport>subdivision>untick GPU subdivision -----> this fixed it for me!!!
@VA-gu1jq
2 жыл бұрын
@@clairbender Thank you! I almost gave up on scrolling through the comments seeing if anyone else had this. Mine would just disappear, and I was like, alright, tutorial over I guess.. The donut continues! 🙌🙌🙌🙌
@optimallyace5824
4 ай бұрын
I'm 14 and I'm learning 3d modeling this helped greatly
@hotsieswill
Жыл бұрын
I've honestly had such a tough time learning blender and for the first time I'm getting it! The way you teach is awesome and I don't feel confused at all on any point and actually feel confident in making my own meshes already by video 2 and usually I get bored easily on other tutorials but you're straight to the point where I don't wander off and can come back and remember what I was doing if I did. Thank you so much!
@happymealchiz
Жыл бұрын
you got this, you will be a master at blender in no time! Never give up!
@NANOmasion
2 жыл бұрын
For those who get stuck at 15:20, don't forget that your donut is very small, keep turning the mouse wheel, scales are written on the upper left
@TheDefiGeneral
Жыл бұрын
thank you sir
@emiliannamrasch9364
Жыл бұрын
Ohhh, NOW I get what the other comments were trying to say xD Thanks a bunch!
@jinh7289
2 жыл бұрын
15:00 the circle appears to 0,0,0. I struggled for few minutes then realised my pivot point was set to '3D cursor'. It should be set to 'Median point'. 1. Press . (period/full stop) 2. select median point
@CrustynDusty
2 жыл бұрын
THANK YOU SO MUCH I WAS SO FRUSTRATED
@ivyjay1581
2 жыл бұрын
you are the best i love you thank you so much
@dantootill
2 жыл бұрын
Great tutorial as always, but it might have been easier to demonstrate what subsurf is doing if you'd had the torus shaded flat before tweaking the levels.
@cagethelonewolf
Жыл бұрын
started this video around 10pm these video's are great it explains everything and gives high detail for ones who get a bit lost.
@headbanditkillian
Жыл бұрын
Have you considered using Geometry Nodes to procedurally generate the imperfections in the geometry of the torus shape to provide a more realistic shaped donut instead of manually doing it using proportional editing? This would also allow you to easily generate a variety uniquely shaped donuts with more ease than doing it manually for each one. I found a simple way to do it using Noise Textures which gives it a nice look, and makes it easy to create some variety in shapes.
@Ruthavecflute
Жыл бұрын
You could well be right that that would be a more effeciant in terms of time. However this is a begginer tutorrial, and he's focusing on the basics to start with.
Пікірлер: 4,6 М.