Every beginner to Blender, remember that it’s very difficult starting out. However, if you stick with it and follow through, it will be well worth it. Awesome tutorial as usual :)
@StephenJK1
2 жыл бұрын
Thanks :)
@StephenJK1
2 жыл бұрын
Thanks
@runitsacow
2 жыл бұрын
Can confirm
@blenderbachcgi
2 жыл бұрын
I was a beginner once, with horrible CGI. As a beginner, you always think you'll never become as good as the pros. However, you will, if you work hard at it. I began very badly, with terrible CGI, (you can see my very first Demo Reel on my channel), but I continued to learn and model, and eventually became what I am today. As I like to say, every professional was once a beginner. To all the beginners out there, go find your groove! You don't have to follow trends to be good! Let your ideas and mind soar, and whatever you create will be yours! You can even make a cube jumping on top of a sphere, I don't mind. But whatever you do, you don't have to stick to the trends and do what's popular, just because people expect you to do it. You must enjoy the process of creating, not create for the fact of being popular and trendy, but not receive any happiness from the workflow. I never followed trends or popular ideas. People asked me to, but I always told them one thing, "When everyone does the same thing, everything becomes un-original, bland, and boring. Life is supposed to be full of surprises, not the exact same at all times. When life becomes dull, without change or surprise, it loses its meaning." So buckle up your seatbelt, Jack, and open up your mind, and let your CGI take you places, you've never been before! -Blender Bach - The CGI Guy
@mcnal9721
2 жыл бұрын
@@blenderbachcgi Very insightful! I'm still in the average stage, where my renders look okay but not great. I'm still motivated to grow and improve though!
@Emsw613
Жыл бұрын
having these free tutorials is such a luxury. without creators like you, I would have no clue where to begin. thank you!
@HushHushHushim
11 ай бұрын
we all pay collectively by watching the ads.
@epontius
2 жыл бұрын
at 06:05 when doing the icing, the instructions are to change the thickness from -1 to 1 since the thickness has added inward rather than outward. But when I do that it it was the opposite. I discovered that my duplicated donut top half icing had the normals flipped around. So changing the thickness to positive values was having the opposite effect on the donut thickness. Flipping the normals did the trick.
@akmaly4999
2 жыл бұрын
Thanks for the tips m8
@SelesaiKerja
2 жыл бұрын
big thanks man
@PJ_Nambara
2 жыл бұрын
How to flip the normals?
@OneEyedMonarch
2 жыл бұрын
@@PJ_Nambara Select a face, then all faces with L, then press Alt+N and Flip
@PJ_Nambara
2 жыл бұрын
@@OneEyedMonarch Thank you.
@ayy2193
2 жыл бұрын
3:20 if ur trying to move the icing separately but it moves them together you might have Proportional editing on still (O) , disabling that let me move them separately.
@ashleyyyy3677
2 жыл бұрын
THANKS
@ayy2193
2 жыл бұрын
@@ashleyyyy3677 yw
@drakfiryoutube7911
2 жыл бұрын
Thankyou :)
@ayy2193
2 жыл бұрын
@@drakfiryoutube7911 u got it
@inanimatesum4945
2 жыл бұрын
Gonna like and reply because bless you so much, I have like 3 different donut files trying to figure out what went wrong lol
@ItzJbeats
Жыл бұрын
i just start learning blender and i think you're making it look more easier than i expected thank you for this tuto. much love Bro
@RubenWienand
3 ай бұрын
much love back, respect brother
@enkephalin2803
2 жыл бұрын
Timestamp: 0:40 - how to make the icing 0:50 - entering edit mode 0:57 - straight on view (numpad 1,3,7) 1:14 - orthographic and perspective mode of view (numpad 5) 1:46 - X-ray mode (hotkey:ALT+Z) 2:21 - duplicate (hotkey: shift+D, left click to confirm with movement, right click to duplicate without movement) 2:57 - separate (hotkey:P) 3:37 / 4:14 - select linked (select all things connected) (hotkey:CTRL+L) 4:37 - rename objects (hotkey:F2) 5:04 - add thickness to the icing (solidify modifier) 5:36 - wireframe mode (hotkey:Z) 5:51 - changing the offset and thickness in solidify modifier (negative: add thickness inward; positive: add thickness outward) 6:17 - subtle/precise movement(hold shift), incremental movement(hold ctrl) 7:10 - order of modifier
@phoepyae2802
2 жыл бұрын
ありがとう
@asthalis
2 жыл бұрын
Thanks for timestamping every new donut video !
@wywywy7436
2 жыл бұрын
thanks!
@wesleytillman9774
2 жыл бұрын
Thanks again.
@ucupzzz3759
2 жыл бұрын
how do i get on the straight on view without a numpad?
@mohdarshath8992
2 жыл бұрын
I started a year ago and followed his 2019 tutorial Guys it gets hard at some points, but stick through and have patience Youll be proud of your work Thanks blender guru for giving me a hobby to work on Im wishing well luck to the next gen of doughnut makers
@sleepy5315
2 жыл бұрын
damn this is inspiring. 3rd attempt on trying not to F up the icing lol
@moazcheese5126
2 жыл бұрын
thank you comrade in doughnuts
@diegocardona8185
Жыл бұрын
I have no lie tried thirty times. This is not possible according to these instructions
@RubenWienand
3 ай бұрын
it did get hard but i pushed through and im thriving on blender 😍😍😍😍
@1996monicasantos
2 жыл бұрын
I literally just finished the last donut tutorial today from the 2019 playlist, but now I see there's a brand new one...guess we're off to making donut number 2! Thank you for your amazing tutorials(:
@dabullah
2 жыл бұрын
same
@1996monicasantos
2 жыл бұрын
@@sdrawkcabmiay Yeah his tutorials are very well done! I feel like we all unintentionally signed up to be in this donut family, and only the strongest survived
@Steve18795
2 жыл бұрын
Wow, you are like a superhuman to have finished it. I couldn't make it past episode 2 😂😂
@1996monicasantos
2 жыл бұрын
@@Steve18795 It was definitely a challenge, but I pushed through! 😊
@diambangfajar5776
2 жыл бұрын
@@1996monicasantos hey dear
@SlickFX_Trader
2 жыл бұрын
I ahve gotten to part 5 three times and started again because i keep seeing and understanding things I did wrong earlier on as I progress and im developing a very good understanding of how to apply these tactics and tips to real problems and builds. This is the best tutorial I have ever done by far, and I have done a few of them. I have been looking for that edge and have paid for cgi previously untill I realised I can actually learn myself without the start up costs I was made to believe I needed. AWESOME TUTORIALS!
@MrIckIsHere
Жыл бұрын
I messed something up later in this series and had to jump back here. Moving forward, I started saving a different .blend file at the end of each video. That way I could jump back to a time when things were working how I wanted them, rather than starting all the way over. Saved me a lot of headache and stress. Hope this helps!
@gabbeeto
2 ай бұрын
or just use git and commit all the changes from every episode instead of making a lot of backups. in git you can go back to the past as well
@leeyithung
2 жыл бұрын
for those who cant get the rectangular selection box, u need to click and hold on the arrow icon (first top in the left toolbar), and change your selection to 'select box'. For some reason mine changed to 'select circle' instead, took me a while to figure it out :)
@sushiiprxncess
2 жыл бұрын
TYTYTY omg I was getting so irritated loll
@DropsmithUSA
2 жыл бұрын
YOU ARE TOP GANGSTER THANK YOU
@aminafnan1659
2 жыл бұрын
tqttqtqtqtqtq
@josh64128
Жыл бұрын
omg thank you, I was fuming trying to figure out what I was doing wrong lol
@marslogos
Жыл бұрын
thanks
@DaCiken
2 жыл бұрын
it is really refreshing to go to this new series after all the experience iv gained, after the last donut tutorial i can really feel the growth.
@demoness2005
2 жыл бұрын
Exactly how I feel. I remember how frustrating it was to get this far following the first donut tutorial. This time I was actually doing things ahead, with very little adjusting. I'm just waiting until we get to the sprinkles and see if there are any major changes.
@xarfram
2 жыл бұрын
If you find the tiny scale frustrating when moving sliders, you can go into your scene settings and change meters to centimeters. The option is in the same place as where he showed us how to switch to imperial units
@manavgupta4495
2 жыл бұрын
Oh my god thank you so much I was finding it soo frustrating.
@CoconutPete
2 жыл бұрын
great tip!
@mikeklaus6618
Жыл бұрын
Where is this exactly? Can't find it.
@ChrisVideosGreek
Жыл бұрын
@@mikeklaus6618 Click on any object. On the tab where "Modifier properties" is located, there should be an icon saying "Scene properties" (it has a cone in the icon). After you click that, click the units dropdown and go and modify the length option from there!
@KrishnaSingh-gs2lj
Жыл бұрын
btw if anyone can't see the xyz thingy then on the top right there is a cross bow type button called show gizmo it will bring it back
@Highcastle_of_Geek
2 жыл бұрын
If your icing edge looks different than his at around the 7:15 mark you may have issues with clipping in the next tutorial. I experimented with the random selection modifier to make the donut more irregular but then at the 7:15 point, instead of having an obvious edge my icing appeared more sunken and this lead to clipping in the next tutorial. Some have suggested applying the subdivision modifier (making sure it's at the top) before editing the icing (in the next tut) and this may give enough vertices to get the icing to snap to the donut (and not clip).
@warman156
Жыл бұрын
So how do i fix it?
@maxcleaver5191
Жыл бұрын
@@warman156 ^^
@lame0fame065
Жыл бұрын
Right Click to Bring Up the menu
@pachucodreams
10 ай бұрын
This has been amazing. I'm having a lot of fun working with Blender and your enthusiasm and succinct teaching makes me want to venture further into using it. Thank you for these tutorials.
@LilithinMerria
2 жыл бұрын
For those having problems with the negative offset, do not forget to disable the proportional editing objects. Try also to move the icing up and down by grabbing it with G. If it doesn't work, delete the icing after disabling the proportional editing objects then make a new icing (with peo still off).
@efetanyildiz
2 жыл бұрын
thanks had this issue just closing the prop editing worked tho
@LilithinMerria
2 жыл бұрын
@@efetanyildiz You're welcome ^^
@anniefang4995
2 жыл бұрын
Thank you.
@LilithinMerria
2 жыл бұрын
@@anniefang4995 You're welcome.
@horrorview
2 жыл бұрын
THANK YOUUUUUUUUUUUUUUUU!!!!!!!!!!!!!!!!!!!!! Good god, that was giving me fits!
@smittysbuilds
2 жыл бұрын
if you make your icing and offset is opposite so -1 makes it look like his 1 Click Icing an tab to edit mode, click on edge/vertices/face and press A to select all , then hit alt+n and click on flip to flip normals and now offset looks correct.
@august1870
2 жыл бұрын
thanks man! was stuck on this
@furredesign
2 жыл бұрын
Thank you! Didn't notice this was an issue until later on where I would try using inflate and everything got pushed into the donut instead! Thanks to you it's finally fixed!
@chris-ub1vw
2 жыл бұрын
this stumped me for four days, thank you.
@sergio..81
Жыл бұрын
God bless you
@badlifedecision3581
Жыл бұрын
Thank you so much, spent at least an hour trying to figure this out :/
@kayden_thornock
2 жыл бұрын
For anyone that missed it and pretty much has their icing inverted: make sure that with the icing, in the solidifier modifier that the offset is set to 1 and not -1. Hope this helps!
@KayDay21
2 жыл бұрын
Heck yes! Thank you so much. That part put me to sleep. 😂
@usafa1987
2 жыл бұрын
@@KayDay21 Mine looks correct, but the modifier is negative. Did I select the grid backwards or something?
@iamjesper
2 жыл бұрын
@@usafa1987 i have the same problem, my modifier offset is negative, but the thickness works as it should. if i set a positive offset like in the video, it just fucks up?
@Wolfer1OOO
2 жыл бұрын
Mine has done the same As usafa and iamjesper, no idea why but it seems the negative offset is right for me instead of the positive! Does anyone know the reasoning for that?
@BlackIceZa
2 жыл бұрын
@@Wolfer1OOO Same for me
@newvibe7
2 жыл бұрын
going throw other beginner tutorials they were still helpful but this one this channel by far the best to exist , he doesn't only ask you to follow along but explain the smallest steps and details so you can actually understand and use it in the future instead of just following it , many many other tutorials they say do this and that and literally i wouldn't have a single idea why he chose it or for it so i couldn't thank blender guru enough
@pilotdawn1661
2 жыл бұрын
Have learned 8 3D packages over the years. Lightwave, Softimage, Maya, 3DS Max among them. In each case, the process was the same. Read/See that a control exists, try to apply but forgetting how, Find it and do it ... and THAT is moment you've learned it. Frustration drives to achievement. Don't give up...going thru this process right now. Blender is extremely impressive! Looking forward to using it.
@orimandel
2 жыл бұрын
Wow why 8 different programs damn
@crumblebee6728
2 жыл бұрын
last time I tried this I had zero blender experience, and as good as it was I still got a bit lost towards the very end and I foolishly gave up. I'm now coming at this with blender 3.0, and a few tutorials under my belt that I may have also failed at, BUT I now understand the lingo, the interface and nothing seems too daunting now. I even paused, went back and made changes to my model and resumed and didn't skip a beat. SO very hopeful that this will be the one that sticks. Thanks for doing this
@InstaAE
2 жыл бұрын
Gosh, I've never used Blender and I'm enjoying this so much. These tutorials are so gosh darn helpful. Thank you SO much!
2 жыл бұрын
I have already learned a lot from other channels, but for some reason came (back?) to this series - to see if it has something more to offer. I would save a lot of time if I started from this - you are explaining potential problems, mistakes so well. Extremely useful videos. Highly reccomend.
@Mmesi737
2 жыл бұрын
Helpline 📲📩 QUESTIONS CAN COME IN ☝️☝️..
@shotbyskiddy
11 ай бұрын
Around 5:04 , make sure you select the Icing (duplicate) in object mode before adding the Solidify modifier if you're having trouble with the values not representing the correct thing.
@malezyarehber1283
10 ай бұрын
thanks man since two days i was stucked here
@john-luc
10 ай бұрын
Thank you!!
@BIGCHUNGUS-s3v
8 ай бұрын
Hi. Can you help me? I'm trying to duplicate the half selected part (make the icing) but it wont show in the outliner? Basically it is merging with the donut itself
@DirePulpGaming
Жыл бұрын
Coming here in 2023 with Blender 3.6, with the thickness of the icing, the default offset of -1 is now on the outside of the Donut Mesh with the solidify modifier and doesn't need to be adjusted. At least, not in my case. I also didn't like the weird "lip" over hang of the icing mesh after using subdiff so I used the nifty scaling shortcuts learned in part one to scale the icing down and adjusted the thickness to get rid of the lip. That, in turn, left the center opening of the icing overhanging the donut altogether, creating a weird gap. I then used the wireframe view on the icing and "Ghost" view on the donut and had to go learn the keyboard shortcut to grab the inner icing verticies (Alt while select clicking on an edge between verticies, Hold shift+Alt for selecting multiple) to scale down/back those inner edge loops to be more inline with the donut's center hole. Word of encouragement for those coming here in the future, don't be afraid to mess up. Worst case scenario, you delete and start over. And a lot of times, that's a good thing. Experimenting is how you truly learn in applications such as Blender. Learn the basics and you'll figure the advance stuff out as you go. Edit: Future me here. I need to quit rushing to fix problems that get fixed through far easier steps in the later videos. Shrinkwrap is your friend. lol
@joysavvy
2 жыл бұрын
I love how this new tutorial is building on the previous series (tutorial). I'm glad I went through the previous tutorial 💞❣
@M3rcheAlt
2 жыл бұрын
Yep
@joysavvy
2 жыл бұрын
@M3rcheVODS I'm hyped for tomorrow😄
@fourcgames7568
2 жыл бұрын
Yeah exacttly, I'm just going through it again just in case there are some awesome new features added to Blender or if there is something that he didn't talk about in 2019. For example in the last part he told us about the hotkey to move the faces in the direction that they're facing. I had no idea that it existed, but it's so incredibly useful..
@joysavvy
2 жыл бұрын
@@fourcgames7568 Sweet! 🌸Good luck on your Blender journey 💛
@Viscomediasolutions
Жыл бұрын
The great thing about watching your videos is that you are very good natured😍
@Silly_Cilly
2 жыл бұрын
Tip. I am starting out so I might be wrong. I got stuck at the icing for about half an hour. I only just figured out what I was doing wrong. Here's to hoping I can save someone else's 30 mins. If you cant see the icing. Or if changing the thickness of the icing makes the whole donut go bigger make sure that you are modifying the icing layer thingy on top right.
@superlita
2 жыл бұрын
For the love of god this was me took a break for a day and realized this 🤦🏻♀️🤦🏻♀️🤦🏻♀️
@datdigital
2 жыл бұрын
I lost my 15 mins. But you saved me the rest 15 mins. Thank you!
@broski2030
Жыл бұрын
f12 - renders a screenshot of the 3d model with lighting ctrl+z - undo g - move(also pressing x,y, or z will move it along an axis) hold scroll wheel to snap object to an axis for rotate scale of scale r - rotate middle mouse without shortcuts is to rotate view/orbiting shift + middle mouse is to change center of orbit scroll to zoom (ctrl will make it smoother) numpad period - will automatically center orbiting on object numpad 1 - front view numpad 3 - side view numpad 7 - top view perspective view can be turned on/off with numpad 5 alt with middle button will snap to axis on left side when clicking an object there are some properties to mess with above properties are the items in the scene shift D - duplicate numpad 0 - camera view if ur trying to move the icing separately but it moves them together you might have Proportional editing on still (O) , disabling that let me move them separately. when doing the icing, the instructions are to change the thickness from -1 to 1 since the thickness has added inward rather than outward. But when I do that it it was the opposite. I discovered that my duplicated donut top half icing had the normals flipped around. So changing the thickness to positive values was having the opposite effect on the donut thickness. Flipping the normals did the trick. revise scale element ??? stole peoples comments so i can use as reference
@nofuxpy9812
2 жыл бұрын
All of these videos are great. The way you organized them makes it easy to recall at least vague references to things I did following your donut tutorial, and trace those references back to a specific video in the tutorial any time I need to recreate a similar effect for my own projects.
@amberbouley
Жыл бұрын
Great tutorial so far, seems very easy to follow along. One suggestion I have is showing people how to save and recommending saving between tutorial parts.
@7errafirma
2 жыл бұрын
From the perspective of an absolute beginner, I think you need to explain why we need to do further actions after we duplicated the top half of the donut. It took me a couple of minutes, but I've figured it out: The duplicated part still counts as part of the original object, you can confirm this by placing the duplicated part away from the original object, the hit G and you'll see it moves both parts. So it means any modifiers or other stuff we want to do exclusively for the icing, would also apply to the donut itself. Sometimes when we get really good at something, we lose perspective of how things were when we were beginners.
@jello9256
2 жыл бұрын
I'm stuck i nthis part. I require help.
@thejanitor5671
2 жыл бұрын
he said you need to press esc.
@siyandasibisi1058
Жыл бұрын
after duplicating the icing hit "P" to separate the donut into two individual objects
@7errafirma
Жыл бұрын
@@siyandasibisi1058 I have already built my own tank at this point, but thank you :D
@strangelegend6209
Жыл бұрын
@@siyandasibisi1058I did that but when he instructed the modifier to thicken the icing, it only thickened the donut itself, even when i tried it on both taurus' :(
@catlord8568
2 жыл бұрын
Excited to see a whole new bunch of Blender artists start out just as I did!
@sprinkles_091
Жыл бұрын
used to, i would ask certain people in my friends group as a teen back in like 07' lol how to do something in blender and there was this one girl who would absolutely refuse to tell me anything bc she evidently had paid for the college class to figure out how to use it. made us all so mad, i am so genuinely thankful for you and what you do here, updating with newer versions and most importantly, not speeding through it to where i cant understand. thank you!! this is the second time im making this donut, and the first time i gave up on the icing and just glazed the whole thing bc i couldnt figure it out, then couldnt get it out of blender into sims 4 studio. the comments this time around im really appreciating for troubleshooting and have worked thus far, where i would have been lost after the first video otherwise with the zoom limit issue, and the icing having inverted normals.
@Cypsky
Жыл бұрын
The quality of those tutorials is mind blowing!
@patricenegros3982
2 жыл бұрын
despite following all previous donut tutorials, I still manage to learn one or two tricks each time . well worth watching even if you have been blending casually for years! Thank you for your patience and dedication to teaching this excellent software
@evelyns3dshop
Жыл бұрын
I have a year of experience using Blender but I am watching this series (I did the previos donut tutorial a year ago when I first started using blender) and I am not regretting it because I have learned things I will now be able to remember because I am more familiar to blender. One of the new things I have learned is the select link vertices. Thank you Andrew!
@bensoyart7175
2 жыл бұрын
your number 1 Sir Andrew. Thank you❤️
@pluto814
Жыл бұрын
just love how everyone is so helpful and supportive! It's a great community
@wisdom_artistries
Жыл бұрын
First time of using blender and when i watched the part 1, i almost immediately learnt every tool he talked about, THANKS!
@ShroomMasta2009
Жыл бұрын
Ty for making these beginner videos its helping out so much this one is better then your other ones too or after making the doughnut twice its finally starting to click I dunno but after I get done with it going to watch everything again and do it twice so I can get super firm grasp but after that what should I do next maybe the bugs bunny anvil thing I dunno seem to remember that from a couple years ago
@Aliforium
Жыл бұрын
Hello! At 5:55, even if I go into wireframe mode, I can't see the "donut inside a donut". Is this because I have a newer version(3.6) or have I done something wrong?
@blenderguru
Жыл бұрын
Stuck? Join the new Blender Guru Discord to ask for help or just hang with other Blender users: discord.gg/c3B2sZDsam
@tacobell7233
Жыл бұрын
link's already dead :'(
@2if_GD
Жыл бұрын
invite is invalid. love your videos btw
@chemical_x5350
Жыл бұрын
it's not working :/
@blenderguru
Жыл бұрын
Discord link updated! discord.gg/c3B2sZDsam Sorry I'm new at this :P
@alexanderfpv6655
Жыл бұрын
I love how helpful the comments are on these videos. Great series.
@StarrDust0
Жыл бұрын
I might've said it before but you're an awesome teacher...it's what I need, nice and slow, learning bit by bit. I want to run before I can walk, but ofc I know I must go through this process first. I'm an engineer, working on some designs I have for a business I hope to start. My hand sketches are ok, but not great and I prefer 3D so i can move parts around at will. So I realized I have no choice but to bite the bullet and learn Blender. Eventually I'll do it up on Solidworks and/or Catia, but this is good for a start.
@koboltanimations7870
Жыл бұрын
5:45 when we solidify the icing mine didnt have the inner part , what I discovered was that the thickness that was automatically set to 0.01 was very very think on my donut and I couldn't even see it . Putting the thickness to -0.25 fixed it
@jiachadha4214
Жыл бұрын
ily
@shardacula3465
Жыл бұрын
ily 2.0
@goodsoup4
Жыл бұрын
For people struggling with the solidify modifier (if it's making like a huge thing looking like nothing but the icing of a donut), it may be a scale problem. I had everything at 1 but i messed up with the meters into centimeters converdsion and i ended up with a 1 cm donut (cause i thought 0.01 m was 10 cm, but you know, without really thinking about it) and I think the problem came from that because i didn't have the issue when it was 3m long
@Tachastasiia
Жыл бұрын
this is sooo helpful - the whole time as it turned out I had 0.001 m donut XD
@glsOOOgls
2 жыл бұрын
At this moment, lots of people want to save different versions of the donut. There is a nice feature in blender to do that. Lets say you want to save a new version of your donut and the old filename is donut.blend. You press: File -> Save As (or Ctrl-Shift-S). Then you press the + next to the name of your file and the filename will automatically jump to donut1.blend. Then the Save As button does the Save.
@janpaweii3115
2 жыл бұрын
the hotkey its not too much its absoltely esential to work with that beast. i love you bro
@jordanmason210
11 ай бұрын
I managed to progress in such a few days after much procrastination which I don't know why but I just randomly scroll videos and memes which further throws me off track and aids my procrastination lol But now I found a good music playlist, grabbed a hot tea and pulled up your tutorials. Thank you so much for doing this btw
@chicinlace
2 жыл бұрын
okay, so i had the problem with this solidify thing because mine just doesnt look like donut in donut when i am in wireframe mode. and when i change my offset like him, it just didnt work well like him, until i realize what i done wrong before. in previous part (second part) of this donut series, when he teaching you about real world measurements and applying scale, just listen him carefully and do whatever he do. we had the problem because we just forgot about applying scale! and now i fixed my problem and i hope you guys can solve your problem with my idea too
@sl0th000
Жыл бұрын
thanks ive been stuck on that for 20 minutes
@chicinlace
Жыл бұрын
@@sl0th000 no problem
@emmaskjoedt
Жыл бұрын
So! 3:05 if you're stuggling with your donut suddenly is invisible, and it does not help to exit edit mode. Try check if you (like me, I just used a half hour and a bunch of sweat) checked the wrong button, when going into x-ray, and somehow deleted the shading. The button just right for the x-ray. I almost started over 😅
@aleksa9187
Жыл бұрын
the comment i was looking for, THANK YOU
@Kalki-bt1hp
4 ай бұрын
thanks bro
@JenCarpeDiem
2 жыл бұрын
On today's daily build of 3.0, I needed to adjust the Thickness Clamp on the Solidify modifier to 1, because without that it looked like a mushroom. I have no idea. Just sharing in case anybody else has the same issue. It's fun doing this tutorial a couple of years after doing the last series, it's like a combined refresher and warm-up in one! :)
@c0al
Жыл бұрын
same here, my offset settings have to be the opposite of what's in the video
@chapellennamami8060
Жыл бұрын
Thanks bro this really helped me alot I pray you go places 🙏
@navyblue1111
7 ай бұрын
Thank you so much, I really appreciate the elaborate detailed lesson
@syamilsalimulqolbi4261
Жыл бұрын
This is my first day using blender again after many years. I was a bit confused with the update, and this channel is very helpful.
@roesti6214
2 жыл бұрын
Unfortunately, when I add the Solidify modifier and enter the Wireframe mode, the result looks completely different. The inner Donut is there but it is not so small like the one shown in the video. I hope I'm still on the correct path...
@spencerdefaux6756
2 жыл бұрын
Yeah same with me
@TheLoveMiku
2 жыл бұрын
Hm, maybe you need to apply the scale again.
@coda7408
Жыл бұрын
After applying the solidify modifier to my icing, I've noticed that there's a missing chunk of icing around the middle hole of the donut. I'm curious as to why that is. I've followed the tutorial exactly, or at least I think I have.
@JOEYgrim
Жыл бұрын
Likely where you're vertices in the middle were lower than expected after the reshaping and the full ring didn't get selected before creating the icing? Happened with me and I had to check and reselect
@alaeddinemehenni9602
Жыл бұрын
make sure ur scale is 1
@anantchandak9574
Жыл бұрын
vro same prob with me
@xnx304
Жыл бұрын
OMG, I love the way you instruct step by step right through the features. Just the way we can learn and do it. 1 billion like
@sjoukeduinstra9071
2 жыл бұрын
love these video's, quick to the point, not to much fiffaf but just enough to not be boring
@bugatti_chiron7
Жыл бұрын
For anyone confused with the select lasso, which does not show the square face but shows the random face, try holding down the LMB and selecting the box in the menu.
@baser4039
2 жыл бұрын
For anyone with icing that doesnt look like his right away, try upping the thickness on the solidfy modifier, Its likely cuz our donuts are big.
@luigibombastico7641
2 жыл бұрын
(sorry for my Bad English I'm German) what's wrong with my settings? I do it the same way at 8:00 but it is looking like trash😰 The icing isn't sticking out and there are wavy lines all over the donut
@adrian-mg8dl
Жыл бұрын
I love how he gets straight to the point
@prudvi1868
Жыл бұрын
third video done. and the comments with timestamps and hotkeys at that timestamp is really helpful. serves to refresh our memory after going through the videos.
@Totorosh27
2 жыл бұрын
Seen similar question in the comments but the offset works for some of us as -1.0 and not 1.0. So not sure if it will affect future tutorial parts so hope someone can help!
@OneEyedMonarch
2 жыл бұрын
Not sure why this happens, but in edit mode select all your faces, then press Alt + N and Flip, that should fix it
@Totorosh27
2 жыл бұрын
@@OneEyedMonarch thanks! Will give it a try!
@heatherline_
2 жыл бұрын
@@OneEyedMonarch i will sound ridiculous, but what part is faces?
@OneEyedMonarch
2 жыл бұрын
@@heatherline_ On the top left, on edit mode you will see 3 icons (Vertex, Edge, and Faces) below Window on the top bar. Select faces so you can select the object's faces and do the fix.
@MeirZ
2 жыл бұрын
@@OneEyedMonarch was going insane trying to figure out how I was supposed to select the faces to fix this. THANK YOU.
@ipro123123
2 жыл бұрын
HELP I cant get my donut to look like it does here 5:55 . Mine just looks like a regular donut in wireframe therefore the solidifying doesnt do anything. Im stuck here and no matter how many steps I retrace, I cannot get the donut inside a donut.
@CoconutPete
2 жыл бұрын
Part 3 complete! Suggestion - not sure if there's an easy way to do it, but would be nice to see the hotkeys being used during video - such as a graphic. Seems like there is screen recording software that does this, but not sure?
@cephalos81
Жыл бұрын
"P" is under mesh>separate, i have to pause your videos so much lol, the frustration is real, but he who quits never gets better so here i am.
@agustinbanegas8550
Жыл бұрын
dude, I need to tell you that your tutorials are the best I've seen
@TheEmeraldSword04
2 жыл бұрын
Handy thing I discovered: when you accidentally de-select your icing before pressing P to segment it, you can use Ctrl+Z to undo your selections and revert back to giving the mesh the orange outline.
@creativecityis
2 жыл бұрын
Ctrl z has been my favourite shortcut
@TheEmeraldSword04
2 жыл бұрын
@@creativecityis No kidding? Me too! Must be _somewhat handy_ I guess.
@Standard489
2 жыл бұрын
Having trouble around 5:33 on solidify, after pushing solidly for the icing it looks almost like an upside down mushroom. What did I did wrong?
@Standard489
2 жыл бұрын
@@bae.melodia7124 I didn’t fix it. I was moving around some stuff only for it to not work. I don’t know what the guy in the video did to make it the way it is. I continued on the series of videos without the icing, deleting from the donut. I recommend doing the same as you’ll still get to learn stuff from it.
@alphaexpress6881
2 жыл бұрын
I had the same issue but scaling the thickness in the negative direction sort of fixed it
@Standard489
2 жыл бұрын
@@alphaexpress6881Tride the same thing, but it just returns it to its original form before I put solidify. I just opt to continue on without the icing.
@samhigh81
2 жыл бұрын
When you selected all the vertices and created a duplicate of the top half, you messed up. check the icing part, it should be in proper shape.
@avidanperry2096
2 жыл бұрын
Hi and thank you for this great tutorial. I'm adding Solidify to my icing, but it's doing to opposite. What I mean is if I'm changing it to 1 the solidify gets inside the mesh (with positive thickness), of course Iif I'm setting negative value in thickness it will go out but that's oppostie. On the other hand if I change the offset to -1 then the solidify frows outwards, again it's opposite. I tries this 10 times and still. Thanks!
@friedrichcampenhausen1304
2 жыл бұрын
Did you find a solution? I have the same problem.
@sailorsally
2 жыл бұрын
im having the same issue! andif I go with negative value i can make it look decent but then the mesh gets burred under the icing & if I flip then again the icing gets swallowed by the doughnut
@meng92250
Жыл бұрын
@@sailorsally same problem here too...anyone got solution? im navigating all the comments ...
@jeancasevenrl
10 ай бұрын
The series are going great and the comments are so helpful. Love this community already
@creativestuff2531
Жыл бұрын
I am always coming back to your Donut tutorials when I am having problems with other tutorials because parts are not as good explained as in your tutorials. Thank you so much.
@Spolt_main
2 жыл бұрын
Oh my god, after a year I learned what I kept doing in last year's tutorial. I had like 5 of those on top of each other and I couldn't figure out why it said I had Torus 001 and torus 007. Edit 3:52 btw
@minshid
2 жыл бұрын
when i duplicated my icing, i saw 2 layers instead of what he had. also. whenever i put my icing into wireframe i didnt see a donut inside a donut, like he did. also, when i moved the offset bar my icing barely moved, but his moves a bunch. if anyone knows how to fix this,
@madman8867
2 жыл бұрын
+1
@ildirimzengilanli9835
2 жыл бұрын
+1
@veritylindsay7760
2 жыл бұрын
+1
@JohnSmith-hx7nd
2 жыл бұрын
The same problem ((
@chicinlace
2 жыл бұрын
okay, so i had the same problem until i realize what i done wrong before. in previous part (second part) of this donut series, when he teaching you about real world measurements and applying scale, just listen him carefully and do whatever he do. we had the problem because we just forgot about applying scale! and now i fixed my problem and i hope you guys can solve your problem with my idea too
@QuantumRob-yt
Жыл бұрын
Order of operations is what you wanted when you were talking about Modifier order and how they execute. Great tutorials.
@nealsid
2 жыл бұрын
If the parameters to the Solidify modifier are confusing to understand, playing around with them with a cube in wireframe mode helped me a great deal.
@issalamaa3819
2 жыл бұрын
i am stupid
@anthonyjones9868
2 ай бұрын
No you're not I'm 42 it took me over 20 years of my life to get to this point. Just to have the hardware to follow these instructions.
@anthonyjones9868
2 ай бұрын
A college kicked me out at the age of 22 years old out into the streets amongst the wolves got a gun pointed onto my head.
@anthonyjones9868
2 ай бұрын
My brother set me up. He recently blackmailed me. And, made me lose alot of money. I was stupid to have trusted my own brother as when it came to my credit.
@rosethxr
19 күн бұрын
same bro
@ersanaskn8659
2 жыл бұрын
I think; as a beginner, starting with less shortcuts might be more relaxing. There are visual tools and trying to remember the shortcuts might be overwhelming.
@HadronCollisionYT
2 жыл бұрын
Beginners do not need to learn all shortcuts. As a beginner, I learn shortcuts as I use them so there is no need to remember all of them.
@IndyGibb
Жыл бұрын
My donut after solidify the icing was inside it when thickness was positive and it looked like someone got their grimy dirty fingerprints all over it so I changed it to negative and set zero offset and that looks best and I hope it doesn’t come back to bite me.
@robbiestewart3473
Жыл бұрын
I had the same problem and changing the thickness to negative solved the problem.
@IndyGibb
Жыл бұрын
@@robbiestewart3473 I ended up changing it back to positive later and at zero offset it looked even better.
@SchmidtDrums
11 ай бұрын
Thank you so much, i always procrastinated learning blender but i think i found my teacher. Its so refreshing to hear a joke or something stupid now and then, really helps focusing and learning with fun, just like it should be. Also your approach of learning what you need, when you need it, really clicks with me, as i am sure it does with many others. Prevents being overwhelmed by software that has no problem overwhelming anyone. Keep it up, love your work!
@jordanmason210
11 ай бұрын
same here... been kinda procrastinating but at the same time very eager to learn lol
@CryptoIncursion
Жыл бұрын
A handy thing I learned teaching myself software (reminded me of it when you said the modifiers need a search bar) When you open the modifiers, you can select the key that is the underlined letter in the word for the hotkey for that modifier.
@richardhambel648
Жыл бұрын
At 6:00 when I change the offset to +1, the vertices are not visible in edit mode anymore. Only when it is negative are the vertices visible for me, but then it is inverted and turning up the Thickness has a weird effect that is hard to describe. It is like expanding underneath itself. It kind of looks like the bottom half of the donut is expanding except it is tilted for some reason. Same problem if I do the "Alt N Flip" solution other people are mentioning. Seems like a bug. Restarting the software doesn't fix it.
@Iced_Out_Soul
Жыл бұрын
Same here and I don’t know what to do 🤷🏽♂️
@askehansen6225
2 жыл бұрын
4:30 After duplicating and seperating the icing layer, it's not the exact same size/shape as the original half torus. It already forms a "skin" over the original torus. Did he scale it up without showing it on screen or what am I missing here? A lot of stuff is not being explained and I feel like I'm just clicking without learning.
@raahil4585
2 жыл бұрын
might be a bit too late for a reply but for me it formed the skin automatically, maybe check if you did the steps right
@askehansen6225
2 жыл бұрын
@@raahil4585 I know, it did for me as well. But I am trying to understand why it does that since he did not scale it up manually.
@raahil4585
2 жыл бұрын
@@askehansen6225 then i dont have an answer for you unfortunately, i watched the whole video before trying myself and while watching this vid i questioned the same thing, looking for an answer in the comments and i found your question bout this. it should technically not form a skin and be congruent and stuck with the donut but it doesnt. god knows why. if you find an answer pls let me know and ill do it as well.
@askehansen6225
2 жыл бұрын
@@raahil4585 Alright thanks, pulling my hair out on this one because I really want to understand why it does that, like what if i just wanted an exact duplicate of the top part? Hopefully I'll find an answer soon (gonna ask on reddit aswell tomorrow) and I'll let you know.
@raahil4585
2 жыл бұрын
@@askehansen6225 thx mate
@ornulubeats
2 жыл бұрын
im doing everything exactly as u do, use the exact same values, but my icing keeps disappearing into my donut
@theoroost5823
2 жыл бұрын
yeah same
@Phoquehead
Жыл бұрын
I really appreciate this guide, so far its gotten me into it MUCH more than just faffing about without a guide you feel your progress in real time. Best tutorial ever lol
@TheFlyInYourRoom
Жыл бұрын
Thank you so much, I tried a different tutorial but it was just throwing functions at me and giving very vivid descriptions. I cannot wait to see my finished product!!!!!
@426F6F
Жыл бұрын
Why does my offset give me the same result as 6:00 when mine is set to -1.0 value for the icing. Also if I try offset: +1.0 it only looks normal if I set my thickness to -0.0015. I guess it just has to do with the positions of both the donut layer and the icing layer.. it's just weird that I can't follow the same directions as in the video and get the exact same result.
@Lassi117
Жыл бұрын
same here
@nicolaspalenzona4095
Жыл бұрын
Same problem
@426F6F
Жыл бұрын
Turns out to not matter so much by the end of the project, still ends up looking good
@jesusdm
Жыл бұрын
I think it might be a change in newer versions, I'm using 3.4 now, and same thing.
@japanwolfi2579
Жыл бұрын
same man
@johnhoward2404
2 жыл бұрын
When I solidified the separated mesh into the icing, mine was not going "inward", I had a sort of muffintop look immediately. I then scaled it down and it fit just fine, with a nice rounded edge (if you leave smooth shading on the icing instead of switching to flat - why did Andrew do that?). If I change the stack order to put the Solidify above the Subdivision I get the donut with the icing as a thin skim intersecting with the surface of the donut. I don't know why mine is different, or what may befall me if I continue without finding out... arghhh!
@matija_ne
2 жыл бұрын
Did u find out what is the problem? I have the same one.
@johnhoward2404
2 жыл бұрын
@@matija_ne I wish I could remember what I did now. I know I went back and started that step again, and I may have ended up using a -1 instead of a 1in a setting on the right panel. But I can't find it now. I will try to make up for my carelessness in not keeping notes (which I do now when I hit a problem) by warning you about the texture paint lesson. If you have the same defaults in your version as I have, then when you try to paint the light band on the donut, you won't see anything but you will see marks in the texture (UV?) map in the left window, marks near the top and/or bottom, but not along the middle. This is because, if you select the active tool icon in the right panel (the wrench + screwdriver tab near the top), then scroll the rightmost panel down until you see Options, then expand it, you will see that Occlude and Backface Culling are selected. You need to uncheck Backface Culling. Also be aware that there doesn't seem to be an eraser for the paint, if you make an error you need to Undo it. If you close and re-open Blender, or even if you Save, I think, no more Undo's of prior work can be done. Sometimes I think it's worthwhile, for any given lesson, saving separate intermediate versions (08a, 08b, 08c, etc.).
@mikscerpins906
Жыл бұрын
Selecting Mode: Complex for solidify modifier seemed to solve the issue for me
@mikscerpins906
Жыл бұрын
I reckon the issue is happening because I am stubbornly refusing to scale my donut down, and the solidify modifier is breaking at large scale (default 1m or whatever it was)
@Vera-yh4le
2 жыл бұрын
5:58 My donut was clipping through the icing or something like that and after 15 minutes, I realised that the offset was on -1.0, so MAKE SURE!! it is indeed on 1.0 and not -1.0 (not sure how that happened cause i did think i did that part but oh well at least its fixed now c:)
@madisona6933
Жыл бұрын
thank u omg
@anzaklaynimation
Жыл бұрын
Your previous donut tutorial was more thrilling and anergetic. Now I have passed that beginner stage.
@Jupiterdibs
Жыл бұрын
As a new blender person blender is super fun I'm trying to be a dev in Roblox but it's really hard but I'ma make items instead ! This is really help full!!! Thank you 😊
@afroham
2 жыл бұрын
at 3:40, I meshed up
@joannepaek
2 жыл бұрын
Currently following along the tutorial: I just duplicated the donut & created the icing layer. Then I added the solidify modifier, but I'm noticing in the wireframe view that the thickness does not look like Andrew's, where it's thicker going inwards. It just looks like the same framing as the donut. When I change the offset from -1 to 1, there's no major change at all to the thickness, the muffin top does not happen. Instead the icing framing stays about the same. Does anyone know what might be the issue?
@loreschmigel
2 жыл бұрын
same here. Please let me know if you managed to figure this out. tks
@ToBy11334
Жыл бұрын
same
@curhob
2 жыл бұрын
4:49 “Same shortcut as renaming in file explorer on Windows” Me when I only had a Mac: *stage 4 confusions*
@sirbucket9746
Жыл бұрын
man i remember struggling with these basic things, and boy have i come far.
@treelife365
2 жыл бұрын
Thanks for this great tutorial series, Andrew! Also thanks so much for your soothing voice, recorded in high quality.
@samuelmorton2324
2 жыл бұрын
I am experiencing a problem, guys. I swear I have followed directions until this point, but when we added the solidify modifier for the icing, it started with the thickness going outward as opposed to inward with an offset of -1. Therefore it seemed backwards--- changing offset to 1 had the thickness going into the donut. So I kept it at -1 and this gave me some later problems as the "mesh" now seems to be underneath the icing. Thoughts?
@sophiaouchari2785
2 жыл бұрын
please tell me you figured it out I have the same problem
@sailorsally
2 жыл бұрын
@@sophiaouchari2785 have you maybe found a solution for this?
@jadhafez9728
2 жыл бұрын
have you found a solution?
@ducksten
Жыл бұрын
read the comments above guys, you need to flip the normals: Select a face, then all faces with L, then press Alt+N and Flip (c) OEK
@lilianberge155
Жыл бұрын
HI do you have any solutions ? Because flip or not I have the same problem over and over. I just can't modify the icing mesh after applied the solidifyer even with the uppset -1 or 1.
@jaredc5463
Жыл бұрын
So I got to the part where you're supposed to select half the donut to duplicate it for the icing, however instead of only selecting half it always selects the whole thing. Not sure if I'm missing something, if someone else has had this issue and found a solution it would be greatly appreciated if you could share it.
@ryryn1457
Жыл бұрын
I had the same issue make sure you are selecting whatever of the two objects you have is the icing not the entire donut. This fixed it for me hope it helps!
@HariHaran-tc8dy
Жыл бұрын
@@ryryn1457 you have to press o to release the object mode and then you can move the object easily
Пікірлер: 2,2 М.