8:25 I don’t understand what exactly needs to be done if the animation doesn’t work after moving the dynamic brush
@nacirooo
2 жыл бұрын
Awesome! Pretty neat tutorial!
@muhammedajinadh9202
Жыл бұрын
help.... am using blender 3.5 i can't get the hair info node
@SmellyNutz
3 жыл бұрын
And a thing i saw: At 0:38, you can just subdivide once and the small menu that pops up can subdivide many more times, instead of right click->Subdivide everytime
@satyasaketh2341
10 ай бұрын
8:25 I don’t understand what exactly needs to be done if the animation doesn’t work after moving the dynamic brush
@monke1709
3 жыл бұрын
F again in the chat for the Default cube
@ArtVandelayInc
3 жыл бұрын
Man this was delicious! I learned lots of things as always. 10/10
@wo0dy
Жыл бұрын
on blender 3.5 or whatever the current latest is. and I see no hair info input node :(
@BlenderMadeEasy
Жыл бұрын
It's now called the Curves Info node. They updated it in one of the recent versions.
@awesomeiram
3 жыл бұрын
Guys If You Want The Same Plane Size As Him. Paste In 3.3207 In Scale X, Y, Z.
@JapanesebyENa
5 ай бұрын
9:35 The Hair Info node has been removed, and using the Curve Info node worked well - blender4.1
@wowroad-t8n
9 ай бұрын
The reason why the dynamic painting won"t affect the grass is Blender is processing modifier by the order from top to bottem .IF particle system is above the danamic paintitng,it will not recieve the effect that dynamic painting gives.
@BurnEdOutOne
3 жыл бұрын
After clicking "bake" it saves all the frames to cache, but when I go to select it for length in the particle system, it doesn't show up there. :( EDIT: If you run into this problem, you may, like me, have neglected to switch the "surface type" to "weight".
@shadowdemonaer
Жыл бұрын
This is something I have wanted for a long time because I think I can use it for something else. The part where you said "if you set it too high, the grass completely disappears" is what i needed the most. The reason why is because I have watched people be able to make objects cut shapes into other objects. So, imagine you need to animate a character eating something, but you don't know how to actually make the character bite and get rid of the part that goes in there mouth, this should work. and I have a working theory that you can also use that small "cut into to make a logo" idea, and using that to be able to simulate cutting vegetables, like a carrot. Then, in the next part of the scene after they are cut apart, you could do a separate animation to sweep them off to the side with a knife, and also do things like make the vegetables fall over a little as they're cut, and slide down a bit too (because if they stayed up straight after being cut and weren't affected by graivity, that would be weird af).
@Fact-Portal
Жыл бұрын
whaat specs you need do make this beautifull animation😌
@RetrovexAmbient
5 ай бұрын
8:07 THANK YOU for mentioning this, holy crap that was the only thing that kept it from working, you're a life saver!!
@idealbucket5406
3 жыл бұрын
can you make a tutorial on how to make a lazer beam
@BlenderMadeEasy
3 жыл бұрын
Iridesium has a really good tutorial on that! kzitem.info/news/bejne/lX6ex6qihn6HaaA
@idealbucket5406
3 жыл бұрын
@@BlenderMadeEasy thank you
@blackswan6386
3 жыл бұрын
can you make a tutorial on " how " do you rotate default cube to exit ? (0:08 min)
@jackgu9889
3 жыл бұрын
Ahhh I think it’s an animation he did because his other videos when deleting the default cube have different cool animations, u just have to animate it I think
@LeClusterFunk
3 жыл бұрын
start on frame one, keyframe the size and rotation. move to a later frame, set another keyframe for each. Set the second keyframe for size to an extremely small number, (so small it disappears), and the rotation value to a multiple of 360 (eg, 360, 720, 1080 etc.) For example, 360 would equal a single spin, so if you wanted it to spin several times, you could do 360x5 for the cube to spin 5 times. Hover your mouse over the keyframe timeline at the bottom, and hit T, set the keyframes to bezier, this will give for a smoother movement. Now go into the graph editor, select only the Z rotation value for keyframe one, and scale it down along the x axis. Do the same for keyframe 2, however this time you want to scale it so It's larger. This should result in a fast spin that moves to a slower spin. You can tweak the settings to your liking as well.
@alexchmrk
4 ай бұрын
thank you!
@satyasaketh2341
10 ай бұрын
how to add the hair info in the blender 3.6
@randomhuman1198
3 жыл бұрын
howd you get the split material screen thing?
@DawkinsDog
3 жыл бұрын
Really neat tutorial, plus the hair info node was extremely helpful, not seen that one covered before.
@jas0n2x49
3 жыл бұрын
Hey, I followed all of the steps, and there is still a line of grass at the end. Any solution or fix to this? All the pathways are the same also going in the same line i just dont know why it's not cutting.
@jas0n2x49
3 жыл бұрын
Hey, I followed all of the steps, and there is still a line of grass at the end. Any solution or fix to this? All the pathways are the same also going in the same line i just dont know why it's not cutting
@SinghArshdeep911
3 жыл бұрын
goddamn you a genius
@luxxeon3d
3 жыл бұрын
Good technique. I've been using this for a while now. Does the job perfectly.
@mattpierson
3 жыл бұрын
Clicking V on the Bezier curve 🤯🤯🤯
@sublimecg8605
3 жыл бұрын
Great tutorial!! Simple and solid advice on dynamic painting
@htsboxes1876
3 жыл бұрын
I’m having issues with the grass cutting all at once. The dynamic paint is above in the modifiers tab and everything is set as it should be. But all my grass is being cut at once.
@muhammedajinadh9202
Жыл бұрын
mine is not cutting the grass. i double checked the modifires.. did u get it right ??
@albertodimperio7911
Жыл бұрын
With your tip about the order of the modifiers in the modifiers tab save me in another project i had very similar ti this,.thank you!
@ProRylan
2 жыл бұрын
Does this work with blender 3.0? iv tryed this 3times and cont seem to get the grass to cut
@jimEther
Жыл бұрын
Just what I needed. Thanks, man.
@ZippaMedia
2 жыл бұрын
I have a logo in grass that will be rotating yet i cant seem to avoid the grass going through the mesh of the other object as its rotating. Any ideas???
@jeffg4686
3 жыл бұрын
Cool technique, thx. So many ways to use weight paint - hard to envision all the use cases until you see it done by someone. That's what I love about 3d is fairly infinite in nature - kinda like nature.
@gabrielpettersson2069
3 жыл бұрын
Very cool tutorial. I am wondering, can dynamic paint be used to part the grass instead of cutting it? I have yet to find a good way of doing this.
@ahnafjamil455
3 жыл бұрын
what did i do wrong , mine is not cutting
@BlenderMadeEasy
3 жыл бұрын
Make sure the Dynamic Paint modifier is above the Particle System modifier. Also check that Use Modifier Stack is enabled in the particle system.
@BlockxBuddys_Kinderfilme
3 жыл бұрын
nice tutorial i will try it out. Thanks
@toadoftheshortforest
Жыл бұрын
well this is exactly what I was looking for
@rebelllion8853
3 жыл бұрын
Your Tutos are really great - much complexe realisations ! Thank you !
@divonoartista9904
3 жыл бұрын
Very interesting and clear tutorial, thank you very much
@jretro4408
Жыл бұрын
There is no hair info
@BlenderMadeEasy
Жыл бұрын
They updated it. It's now called the Curves Info node
@ohmararain3d
3 жыл бұрын
Many techniques in this channel. Thank you.
@BungusThe3th
3 жыл бұрын
This is very good
@arlanalibai
3 жыл бұрын
this is the feeling when the video came out 2 minutes ago
@Larbog
3 жыл бұрын
8:30 how did u bring up that menu?
@Larbog
3 жыл бұрын
pls i need help
@BlenderMadeEasy
3 жыл бұрын
To split the window click and drag in the top right corner of the current window. Your mouse will turn into a + when it's ready to drag out.
@jdworks2922
3 жыл бұрын
nice tutorial man...thanks a lot!!
@carmeloarena8588
2 жыл бұрын
Thanks for this great tutorial !!!!
@utsavjha_in
3 жыл бұрын
Thanks sir . I am looking for this ❤️❤️
@marcinplis2521
3 жыл бұрын
That looks epic !
@cerealbawxtv
3 жыл бұрын
How come when I cut my grass, all of it comes off? I want it to be more like yours where it just cuts lower instead of all the way down to the plane. Maybe I did something wrong? Idk. Someone help if ya can :)
@BlenderMadeEasy
3 жыл бұрын
Make sure you bring down the scale influence in the dynamic paint canvas settings. If it's set to 1 it will get rid of all the hair.
@cerealbawxtv
3 жыл бұрын
@@BlenderMadeEasy yup that was it. Thanks for the quick reply!! 🙏🏾
@9999rcrajesh
3 жыл бұрын
🙏👍🏼👍🏼👍🏼👍🏼❤️
@garnetk3751
3 жыл бұрын
very cool
@rinaldiaja2496
3 жыл бұрын
I love it
@alexeys.7829
3 жыл бұрын
Nice)
@doPi3g
3 жыл бұрын
you helped me sooo much, thank you, perfect tutorial, awesome voice and very compact, pls keep up the good work
@BlenderMadeEasy
3 жыл бұрын
Happy to hear that!
@jas0n2x49
3 жыл бұрын
Hey, I followed all of the steps, and there is still a line of grass at the end. Any solution or fix to this? All the pathways are the same also going in the same line i just dont know why it's not cutting
@akiyahhepburn6422
3 жыл бұрын
Thx so much love your tutorials btw new subscriber here 👍
@BlenderMadeEasy
3 жыл бұрын
Thanks for subbing!
@akiyahhepburn6422
3 жыл бұрын
@@BlenderMadeEasy Welcome
@jas0n2x49
3 жыл бұрын
Hey, I followed all of the steps, and there is still a line of grass at the end. Any solution or fix to this? All the pathways are the same also going in the same line i just dont know why it's not cutting
@jas0n2x49
3 жыл бұрын
Also everything else goes good except the little strand of grass
@SmellyNutz
3 жыл бұрын
A nice tutorial for Saturday morning PS That bg music is cool
Пікірлер: 74