I’m thinking to buy the same pipes, finally do you recommend it? Quality after usage? Performances (no drop)?
@desmomille79
5 жыл бұрын
Finally I mounted the same exhaust, looks and sounds great!!! But the banging at closed throttle are huge now in dynamic mode. Is it on yours too?
@renescentm
5 жыл бұрын
Yes.. in Dynamic the Flap position is more open then in Road Mode. The Sound is Amazing around 1000Km when the exhaust gets Hot
@kentgaisford6806
7 жыл бұрын
at 1:32...what tool(s) are you using to bang away on it....i assume to expand the pipe to fit over the bike's exhaust...? or what are you actually doing?
@renescentm
7 жыл бұрын
Kent Gaisford this tool was a ratchet the only thing i have by my side the reason because i bang on this was this ``Ring`` to tighten the Pipe from the cobra to the Bike when the ring is open its to difficult to screw it in and when the Ring is closed then its realy tight and this is why im bang it in place to fit optical perfect :)
@TeamPyroball
6 жыл бұрын
Also zwischen 0:25 und 2:26 höre ich nur einen minimalen Unterschied. Hat sich da der Kaufpreis gelohnt? Between 0:25 and 2:26 I hear only a minimal difference. Has the purchase price paid off?
@renescentm
6 жыл бұрын
Leider habe ich dein Kommentar erst jetzt gesehen.. Sry aber der Kauf hatt sich zu 100% gelohnt zuerst wollte ich den Akra aber jetz bin ich froh habe ich diesen gekauft!
@nortondlcl
7 жыл бұрын
Remove the servo cables, It will sound better and you'll get 1 MPG more
@renescentm
7 жыл бұрын
Darrell N Thanks ^^ but in Switzerland its highly Ilegal when you remove the DB Killer or Servocables :( What Exhaust do you have?
@nortondlcl
7 жыл бұрын
arrow
@renescentm
7 жыл бұрын
Darrell N full system?
@nortondlcl
7 жыл бұрын
No
@Kevin_Ho70
5 жыл бұрын
How do u remove the Servo Cables? Is that the O2 sensor?
@wissamashkar9392
7 жыл бұрын
I got a Cobra exhaust but I am unable to remove the tip in order to take out the DB killer.. any hint?
@renescentm
7 жыл бұрын
Wissam Ashkar yes you must remove the 3 screws of the endcaps the screws are on the back 9o clock one on the top 12 o clock and on the right 3 o clock position the you can remove the endcap an then the db killer the longer one the same but 9o clock/ 6o clock / 3o clock
@renescentm
7 жыл бұрын
Wissam Ashkar www.dropbox.com/s/uzf2x6sb17k6vx0/20161217_184448.jpg?dl=0 here the picture :)
@wissamashkar9392
7 жыл бұрын
Txks Patrik for your reply, I removed the screws but the endcap is firmly stuck in its place. I even sprayed WD40 in between the endcap and the pipe but unfortunately no success. I am not sure if it is welded or not!
@renescentm
7 жыл бұрын
Wissam Ashkar no its not welded ..but you must twist a little bit to pull them out
@MrArjanOskam
Жыл бұрын
Does the exhaust pop too? When releasing throtlle? The Akrapovic does
@renescentm
Жыл бұрын
Yes it does pop... like the original and like the Akropovic too but i already have the original because switzerlands regulation and horsepower loss with the mufflers on (- ca 30 PS)
@MrArjanOskam
Жыл бұрын
@@renescentm 30PS? Also the Akrapovic has horsepower loss? So you sold the Cobra?
@renescentm
Жыл бұрын
@@MrArjanOskam Yes 30 ps loss with the db killer from the cobra i put the original exhaust back on!
@MrArjanOskam
Жыл бұрын
@@renescentm Ah okay! I've read something like that. It seems to have been fixed with new DB killers in the newest models
Пікірлер: 26