IS NUX TRYING TO TAKE OVER THE WORLD? This is just amazing to have! Early Christmas gift to me!!!
@nuxaudio
10 ай бұрын
LOL
@adhaskym.a9536
10 ай бұрын
They will control the world very soon. Selling cheap and getting your details when you register. After which, you will receive a lot of calls and emails from unknown sources or people. By registering, they will pit a virus and your computer will be bugged. So be careful when buying.
@officialWWM
10 ай бұрын
Yes, China is trying to take over the world!
@CharcoaI
10 ай бұрын
Great design! I really like it. If there's ever a "v2" with a different frequency range, another cool add on would be a dedicated battery in the main receiver, to charge the transmitter when unplugged from mains! (Finish the gig, plug the transmitter back into the receiver, unplug from mains power, and the transmitter can be fully recharged ready for the next gig while stowed away.)
@officialWWM
10 ай бұрын
You should patent that idea!
@justinvzu01
10 ай бұрын
Yeah, would’ve been nice to see 5,8Ghz. 2,4Ghz is absolutely crowded.
@fwc234
8 ай бұрын
It would be nice to be able to buy a second transmitter so you can swap guitars without fiddling around with the transmitter.
@monroegrisman2000
2 ай бұрын
Exactly this is my problem with most of these type of wireless. It's why I use a Line 6 I just unplug from the guitar and plug it into the next guitar. I unit for all my guitars (I use 3-4).
@daleonov
10 ай бұрын
This latency vs stability setting is pretty cool, haven't seen anything like it before!
@nuxaudio
10 ай бұрын
We think it’s pretty cool too
@halcyo
10 ай бұрын
Wish someone would combine an instrument wireless AND my In Ear Monitoring wireless into one receiver and transmitter unit. All on a single pedal for your pedalboard. THAT would be innovative.
@nuxaudio
10 ай бұрын
Good idea
@BW33955
9 ай бұрын
This is a very good design, features like wireless/tuner/boost/DI are useful but in most cases they are not worth valuable space on your pedal board, inegerating them into one single pedal really helps! The only thing is, cabsim seems to be a necessary feature if DI is already provided...
@GuyverJoe
10 ай бұрын
I'm really digging your products! I'm impressed how fast you're developing handy solutions for musicians at all levels. Keep it up! One thing I'd like to see is in which bandwidth this device works and how it deals with the connection in a crowded environment with a lot devices.
@nuxaudio
10 ай бұрын
It's 2.4GHz and there are a few valid reasons why we went this way. We'll get into it in a future video.
@AlenMecan
10 ай бұрын
The design looks great, but it needs the 5,8GHz range and AA batteries (OR OTHER REMOVABLE) for the transmitter to be "Pro". Angled cable for the instrument in addition to the straight one would be nice too. The frequency range, however is the biggest problem, as the 2,4 GHz is useless in almost every venue.
@user-zr5xy5pv8w
10 ай бұрын
Cool design, is a transmitter, tuner, Efx loop, boost pedal and a DI box, good job Nux! Hope it will have a stereo version.
@nuxaudio
10 ай бұрын
That would be cool!
@Jaredt771
10 ай бұрын
This seems like a fantastic product. Well done!
@nuxaudio
10 ай бұрын
Thank you!
@SplattedRabbit
6 ай бұрын
I am currently working on my Live Pedalboard for Bass and I came across this thing. I was seriously mindblown and taken off and away. I was looking for a suitable wireless solution for a board but somehow nothing was fitting just right. I just ordered it and can't wait to use it. Supre hyped for this
@nuxaudio
6 ай бұрын
Hope you enjoy it
@SplattedRabbit
6 ай бұрын
@@nuxaudio Sadly I am still waiting for it since it seems really hard for every retailer to get one
@hiriwarikihana1283
7 ай бұрын
NUX is definitely making moves man! Just ordered mine and looking forward to using it
@waynegram8907
10 ай бұрын
NUX, it would be nice if you added options for LOW impedance output or HIGH impedance outputs and also make an effect loops for high impedance guitar pedals like wah pedals, fuzz faces, etc because most of those pedals don't like Wireless LOW impedance outputs
@nuxaudio
10 ай бұрын
Thanks for the suggestion
@kvvnng
10 ай бұрын
First question on my mind
@jaakjaak0427
10 ай бұрын
From an electronics engineering background I'd love to have more detail as to exactly why you would want a high impedance source. Makes little sense to me. Btw stick a resistor in series and you have a high impedance output, but I suspect the actual issue is something totally different than how it's described. So please, enlighten me. 😊👍
@waynegram8907
10 ай бұрын
@@jaakjaak0427 guitar amplifiers input stages want to see a high impedance input. Guitar amplifiers aren't designed for the input front end to see low impedance so wireless units outputs are low impedance not high impedance
@jaakjaak0427
10 ай бұрын
@@waynegram8907 The joy of a high impedance input is it doesn't pull much current which ensures the source voltage will not drop significantly. Low impedance sources are resistant to the load dropping the voltage because they can source whatever current the input wants. If you're driving a very long distance, than transmission line theory kicks in and matching impedances reduces reflections that can be both constructive and destructive, but we're talking miles, not few feet. So the amp high impedance design is to not load the pickups as they can't deliver the current to maintain voltages. Not a problem for a low impedance source. If you are concerned about output impedance, put a resistor in line with the low impedance source, but you'll need significant resistance to impedance match the amp input, which will attenuate the signal level and create an environment more sensitive to external noise sources. But I'm still new at this, I've only provided electronics test solutions to design engineers since the 90's and worked on guitar amps since the 70's, so I'm really looking forward to learn more!
@mponeillj
10 ай бұрын
This looks awesome. I have been wanting to upgrade my current wireless with something that is pedal board friendly, and this looks perfect.
@nuxaudio
10 ай бұрын
Glad you like it!
@sparkyguitar0058
9 ай бұрын
It's not perfect. 2.4 does not get a reliable signal. Heck I get worried about my 5.8 system. But it's been O K so far. Mostly I use a AKG wireless bug system with a 2 AAA receiver and a 1 AAA battery transmitter. Going into my board and a 5.8 rechargeable wireless unit going to amp. Only cord going to my p board is electric. All that for $140 including two 5.8 system Getaria bought used and the AKG system I've never seen before or since. This system is over $300 and will give you hell I promise.
@MonstoyGuitar
10 ай бұрын
Cool!
@nuxaudio
10 ай бұрын
Thanks
@mr.roberts9684
7 ай бұрын
Can you buy an additional transmitter to use with another guitar? Turning off one transmitter and turning on the other to switch them?
@Bassdriver71
10 ай бұрын
Cool piece. I like the display 👍
@nuxaudio
10 ай бұрын
Thanks 👍
@lanceholland
10 ай бұрын
Pass. We have found 2.4 GHz is too problematic for venues.
@daniurbinamusica
9 ай бұрын
Yes
@mangbeloy
5 ай бұрын
Right!!!
@RCGC01
10 ай бұрын
That set up is awesome
@nuxaudio
10 ай бұрын
Thanks
@alienlovesecrets9379
10 ай бұрын
Very cool. The boost option is very useful. It's a mere volume boost, that can therefore also push the front end of the amp, right?? But if you change multiple guitars on stage it is a little bit disadvantageous to have a cable because you then have to carry the unit somewhere in a pocket. Better would be a plug, that you can just plug from guitar to guitar. Maybe nux can offer such an alternative plug...
@nuxaudio
10 ай бұрын
Makes sense
@lavendarguitar5517
5 ай бұрын
Amazing amazing design!! I was immediately looking to buy and then realized its 2.4GHz..... please please change!!
@Nubwub6829
10 ай бұрын
So you can customize the boot-up screen with any GIF? If so, I gotta add this to my Christmas list lol
@nuxaudio
10 ай бұрын
LOL
@johnpatitucci7919
10 ай бұрын
Genius! I may be switching over...
@nuxaudio
10 ай бұрын
😎
@faronjohnson3478
10 ай бұрын
Nux stuff is awesome!
@nuxaudio
10 ай бұрын
Thanks
@voltnerstudios2115
10 ай бұрын
Thats a great bit of kit!
@nuxaudio
10 ай бұрын
We think so too
@jackiegreene8462
10 ай бұрын
pre order is in. great design.
@nuxaudio
10 ай бұрын
Awesome, thank you!
@martinmyslik13
10 ай бұрын
Hi, looks awesome but 2.4Ghz seems unusable for live venues (had too many issues already). I am digging your C-5RC, though (used it live without issues as opposed to B-5RC). Are you planning 5.8GHz version as well? It seem weird how everybody sticks to this crowded frequency band :/
@ayeapprove
10 ай бұрын
it's because of the range if I'm not mistaken.
@nuxaudio
10 ай бұрын
We’ll cover this topic soon.
@martinmyslik13
10 ай бұрын
I would gladly sacrifice range over reliability.
@ccampau
10 ай бұрын
If you are more than 30' from your wireless receiver, you are playing venues where an investment in a higher cost system is needed. Cool concept, but having a 5.8 version or better yet dual band would be cool.
@MoutchouPitchou95
10 ай бұрын
2.4 GHz is free and authorized everywhere in the world. Which is not the case for other frequencies
@mk7073
10 ай бұрын
Looks awesome!
@edwinvanderhoeven
5 ай бұрын
Looks pretty cool, a pity you need to remove the cable from the transmitter every time you want to charge.
@aaronshortmusic
10 ай бұрын
Excellent design. Very interested to try this.
@harveyandruss8748
10 ай бұрын
Has anyone tried this at a gig location with 2.4 Ghz wifi? Do they compete and cause problems? Please link future video. Old systems had channels, but as the world perpetuates wifi this should be a feature explored front and center
@NiegelDK
10 ай бұрын
Why not use 5.8 hertz rather than 2.4? For more stability in the sound.
@nuxaudio
10 ай бұрын
There are specific reasons why. We will cover them soon
@musicman0024
10 ай бұрын
Love this. So OVER my Line 6 Relay poor wireless system, and customer service! rugged unit plus a tuner... sold! Worth the $319 for me for all the features it comes with!!
@nuxaudio
10 ай бұрын
😎
@samtam39
8 ай бұрын
Great design, high quality 👍👍👍👍👍
@nonoclay
4 ай бұрын
Ive had nothing but trouble with mine. Its dropped out 2 to 3 times each gig. even at the most stable setting. I now plug direct into it. expensive tuner. Im hoping the update may help. my first wireless after avoiding them for years. i play 200 shows a year. So far embarrassing. Any recommendations let me know. I love all my other Nux products.
@ccampau
10 ай бұрын
Been wondering when we would see a wireless system with a DI box built in. Adding an fx loop 👍.
@nuxaudio
10 ай бұрын
Cool
@supervincemus
7 ай бұрын
@@nuxaudiowhy is everyone complaining about the 2.4 frequency? I’m a newbie to the conversation.
@LuigiTuazon
10 ай бұрын
I also create Nux MG30 content on my channel but it's in my native language of Filipino, I hope I can get a shout out from the legend! Cheers! I am loving the Nux brand more and more with these crazy products you put out.
@DanRodriguez1
10 ай бұрын
I love Nux❤
@nuxaudio
10 ай бұрын
🙏
@tattoofred
10 ай бұрын
Me encanta, muy práctico y la salida Xlr perfecta, gracias por el video saludos desde España ;)
@nuxaudio
10 ай бұрын
Gracias 🙏
@DirkMonroe
10 ай бұрын
Will this come with a right angle cable? Only thing keeping me from pre-ordering is having to use the proprietary screw in cable. I can imagine the straight cable getting knocked/broken, would be cool to have a right angle option for Fender guitars.
@fistinair1979
6 ай бұрын
I had to have one custom made.
@DirkMonroe
4 ай бұрын
@@fistinair1979 Where'd you get this done? I want a custom one!
@fistinair1979
4 ай бұрын
@@DirkMonroe rattlesnake cables. Make sure they wire it tip to tip.
@Riggins1966
10 ай бұрын
looks like 2.4ghz. Would be the perfect wireless for me if I weren't trying to get away from that frequency range. Been using nu-x for years. I gigged my Time Force into the dirt!
@nuxaudio
10 ай бұрын
Ok
@StephenWEwart
10 ай бұрын
Looks great b
@nuxaudio
10 ай бұрын
Thanks
@MonteTristoGuitarRips
7 ай бұрын
I've had a couple cheaper units. I had the xvive and the Boss WL-20. I live in a pretty loud network environment and neither of those did the job for me. Heck, the boss would lose signal 3 feet from it. I just got this the other day and I'm not looking back. II was hyped when they announced it. They lived up to it. My only complaint is that the tuner just isn't the best. It's not very accurate either.
@mr.roberts9684
7 ай бұрын
I just returned the xvive because of drop out problems. You say you've had no issues with this one? The 2.4 is concerning to me.
@jimmcdougall9973
10 ай бұрын
The big question, of course, is what will it retail for?
@ThePedalGuy
10 ай бұрын
$319USD
@TheJudy79
10 ай бұрын
I'm going with shure
@fadlyhans82
10 ай бұрын
@@ThePedalGuy$319 USD! Nvm then. BOSS it shall be.
@leesbassment6393
10 ай бұрын
Agreed, that seems a tad high for a NUX product. $259, maybe. That, and 2.4G, in 2023?? Make this a 5.8G, drop the price a bit, and you'll have a winner. FWIW, Harley Benton offers a similar-ish unit, for $88. Admitedly, no loop, DI, or boost. Still tho.
@ThePedalGuy
10 ай бұрын
@@TheJudy79ok
@BrandonWells
10 ай бұрын
nice, sounds pretty useful
@nuxaudio
10 ай бұрын
Thanks
@bakelitsuisse7707
Ай бұрын
Hi Folks at NUX, great product indeed, but I have one concern within my B-8. I have tried with my new toy using my Fender Jazz Bass American Deluxe US (passive) and my Ex-Factor Philip Kubicki (Active - 18 volts) and for both instruments and despite the fact I have enabled the “Boost” function, input level is very low. What should I do as it gives a very weak audio entry into my Aguilar Head Amplifier. Your support is greatly appreciated! Have a nice day and excellent week. Best regards, JC
@walterkendzerski183
4 ай бұрын
Can you get an extra transmitter from NU-X,and how much would it cost?
@davidpatrick1813
9 ай бұрын
One feature I would really want to see is the tuner that also shows the cents very clearly. Also, does this do both electric and acoustic guitars?
@evernehemiasporresramirez2747
10 ай бұрын
la verdad la nux mg 300 ha sido de gran ayuda para mi sonido y me gustaria seguir comprando mas productos de la marca nux para mi guitarra
@Phoboss32
10 ай бұрын
Is the battery in the transmitter replaceable?
@adrianaraiza10
Ай бұрын
Just got one, and 20 seconds after the first song on the first gig using it I lost the signal, i wanna love this unit and was excited about it but as for now I’m dissatisfied.
@MateuszJagocha
10 ай бұрын
Very interesting product! By the way do you have some pos-warranty european support?
@nuxaudio
10 ай бұрын
For European support, contact your local NuX dealer and they should be able to connect you to the distributor in the region.
@rmp5s
10 ай бұрын
How cool is THIS!?
@nuxaudio
10 ай бұрын
Thanks. We think so too 😉
@josevegacr
5 ай бұрын
Is there any chances to get the original 1/4 TX cable (only) for spare?
@oneriffaday6162
10 ай бұрын
I would really like to make a video test of your products, especially mg-30 / mg400... maybe a day :)
@TheEffectsLoop
10 ай бұрын
Do you have to pair every time you want to use a different transmitter? I had the Line 6 G70 and got rid of it because of 2.4 issues (I like the latency/stability setting here and would love to see if that is better) but I really liked having multiple packs because I would usually use multiple guitars during a gig.
@capedukewuhaha
10 ай бұрын
that's weird. Line 6 G70 is the only affordable 2,4ghz product I know that can do the channel scan where you then choose the channel with the LEAST reception bar symbols, cause they show which channels AREN'T used by smartphones etc. Best timing for doing this is when the venue is starting to get crowded. Never had an issue in the last 8?! years with the G70 but with every other product I had some...
@schizo910
6 ай бұрын
Does anyone know if there's also an alternative for the straight plug? I'm mainly playing front loaded guitars and would prefer an angled plug.
@anonymouse527
6 ай бұрын
I was thinking that too. Might have to make a custom cable with an angled plug.
@vriendelijkegroet
10 ай бұрын
Plug is handy for strats but not for flat mounted input jackets like SG's or 335. An angled plug is better. Available?
@nuxaudio
10 ай бұрын
That's a good idea
@mauijet
10 ай бұрын
A lot of features except the most important, switchable frequencies! Basic 2.4 GHz doesn’t cut it for semi-pro or pro gear.
@nuxaudio
10 ай бұрын
ok
@sandim2031
3 ай бұрын
They should have a 5.8 Ghz version of this
@177mephisto
10 ай бұрын
NUX, a really nice konzept! For us Bassplayers it would be a perfect all in one platform if there were the possibility to add an IR or cabsim to the DI-Out. Is there a possibility that this feature could come in the future?
@nuxaudio
10 ай бұрын
Not in this version.
@177mephisto
10 ай бұрын
@@nuxaudio thanks! It would be an awesome feature ✌️
@maxmz_
10 ай бұрын
This is awesome! Is it compatible with bass as well?
@nuxaudio
10 ай бұрын
Yes
@shea_o_keith
10 ай бұрын
But where can it be purchased from? I don't see and option on your website to view a price or purchase.
@nuxaudio
10 ай бұрын
It will be available in the next 30 days
@MoutchouPitchou95
10 ай бұрын
Wow just looking for this to be released 😍 Btw, will it be possible to connect 2 transmitters (not at the same time obviously 😅). Purpose: attach each one on a guitar and switch from one to the other when needed wirhout any additional action.
@MartinStrang
10 ай бұрын
I’m not easy to please but I have two of your products, the B5RC Wireless System and The DM7X Drum kit. Good job, very good quality and products. Not perfect but on the right path which is what matters. BTW I wrote like a year ago asking if the updates from the DM8X Would be available for DM7X users to upgrade. Still waiting for an answer. See, good place to start improving.
@FunkyELF
10 ай бұрын
Looks interesting. I'm not sure I like products that try to do too many things. I'm assuming the loop is for you to be able to send an affected signal out through the DI? So the idea is that you'd have your entire pedal board run through the loop so it can go out the DI? Maybe this makes sense. I mean, if you're going to have DI out then you probably should have a loop.
@emersontanakamotion
10 ай бұрын
is the transmitter locked in the receiver when charging? I am wondering because if the receiver stays velcroed in the pedal board then when we move it the transmitter stays in place?
@nuxaudio
10 ай бұрын
It’s magnetic
@seanmichael8411
6 күн бұрын
So is the DI signal always a raw DI? If i use the loop in the B8 does it add those pedals / amps I put in the loop into the DI output?
@MateuszJagocha
10 ай бұрын
Cool! What about 5,8GHz version?
@nuxaudio
10 ай бұрын
Not at this time. There’s a reason why. Stay tuned
@kithagoras
10 ай бұрын
When will it be available to Europe?
@nuxaudio
10 ай бұрын
Should be in this quarter
@bomartin5204
10 ай бұрын
Why 2.4? I like the design, but 2.4 is too crowded. If it was on a pedalboard how would it charge after a gig?
@nuxaudio
10 ай бұрын
I will release a video shortly discussing this
@ryanlangelan2135
7 ай бұрын
If the transmitter battery were to die mid set, would plugging a cable into the B8 automatically bypass the wireless and start working, or do you need to do anything else for the cable to take priority over the wireless transmitter? Thanks!
@gogreyhoundmusic
10 ай бұрын
price? link to buy? this is a great sales pitch - but how can i give you money?
@nuxaudio
10 ай бұрын
I would like to take your money ;-) The product will be released in the next 30 days at your local NUX dealer.
@rodneyguinn1887
10 ай бұрын
2.4 isn’t usable for working musicians . Too crowded . Otherwise I’d buy it . Very nice features
@nuxaudio
10 ай бұрын
Ok
@claudevieaul1465
10 ай бұрын
In a few months / years we'll probably see this technology combined with amp modellers. You won't have to plug in anything anymore, just turn on your receiver / amp modeller & transmitter, and away you go.
@eleazarfederio1718
10 ай бұрын
How about MG-30 firmware update?
@lankududniteshift
10 ай бұрын
For the DI output, is it a speaker emulated/IR output?
@nuxaudio
10 ай бұрын
No it’s a DI output
@casa_dego
6 ай бұрын
I need to know whether the tuner gets down to A= 432hz, there is no information on the tuner range anywhere, not even in the operation manuals
@jcarh
7 ай бұрын
Can I power the RX from one of the 9V isolated ports of my power supply for my pedal board? Or do I have to use the power cord/pack that comes with the unit? Also, is a 5.8Ghz coming out anytime soon?
@leoolivero963
10 ай бұрын
Dual band? ie. 2.4 % 5GHz or just 2.4 ??
@nuxaudio
10 ай бұрын
Just 2.4ghz
@leoolivero963
10 ай бұрын
@@nuxaudio OK, Thanks.
@codymcalister8502
9 ай бұрын
Is the xlr output pre or post the send / return? Do you just get dry guitar from that output or is it wet with whatever effect I put in the loop?
@jimm8594
10 ай бұрын
I didn’t know Fred Armison was selling guitar gear 😂
@nuxaudio
10 ай бұрын
🤦🏼♂️
@betsabethhijar430
10 ай бұрын
Ya puedo adquirirlo desde la página?
@nuxaudio
10 ай бұрын
Not yet. It will be available in 30 days
@soundlegendstudios3945
10 ай бұрын
with the DI out, which part of the signal path is sent to the DI? Immediately split off the input or after the loop?
@ilkergulener
8 ай бұрын
had problem with 2.4ghz in gigs in +500 people and concert halls with a lot of people with Phones On... any chance to have 5,8 mghz version? or more channel like Shure..
@skaholic_tv
10 ай бұрын
Is it OK this device use to saxophone ?
@nuxaudio
10 ай бұрын
Possibly but I’m not sure how you would accomplish that. Would be easier to get a B6 sax system
@skaholic_tv
10 ай бұрын
@@nuxaudio today im using nux mg30 to may pedal gadget of my saxophone and its work, and great sound
@Icepetalflowers1
8 ай бұрын
Does it cut out quicker than a cable? I’ve found the cheap ones don’t have the same sustain of signal like using a regular guitar cable
@gitarbangsatchanel8036
6 ай бұрын
Will be awesome with iRs inside B8
@dataplatter
10 ай бұрын
How did you skip over allowing the cable to stay plugged in while charging on the dock? The last thing we need is loose bespoke cables.
@nuxaudio
10 ай бұрын
Noted...
@musicmancountry
7 ай бұрын
I may have missed it, but how long does the transmitter last before needing recharge?
@jturquoise
3 ай бұрын
Is there a way to get a replacement transmitter when the battery wears out eventually?
@jturquoise
2 ай бұрын
No reaponse I’ll be purchasing Shure‘s 2.4/5 ghz. These types of batteries aren’t designed to last long. Should have allowed for aa batteries. And the fact that I got no response means they don’t intend to offer support when the battery finally dies.
@chriscuthbertson
7 ай бұрын
Can you buy replacement cables for the transmitter separately? also are they available with a right angled jack?
@fistinair1979
6 ай бұрын
I had to special order a custom one.
@freestylepro1988
10 ай бұрын
Hope you sell it in Mx as well
@nuxaudio
10 ай бұрын
I’m sure we will
@NickName-rm2nt
6 ай бұрын
Is there a Storbo - Tuner mode include?
@officialWWM
10 ай бұрын
How much is it and when will it be available in Australia?
@tristanseume
10 ай бұрын
Nice. Is there a stereo jack option for dual source pickups coming?
@nuxaudio
10 ай бұрын
Not at this time
@tristanseume
10 ай бұрын
@@nuxaudio ok, thanks :)
@raidensama1511
10 ай бұрын
The real question is how well does it work when around a bunch of wifi transmitters.
@kvvnng
10 ай бұрын
Cab sim?
@nuxaudio
10 ай бұрын
No
@see7music261
4 ай бұрын
I have nothing but trouble with mine. It drops out everywhere I use it. Even on the highest “stable” position. I can’t be the only one experiencing this.
3 ай бұрын
you are not alone
@agusmammoliti
8 ай бұрын
Is it possible to connect more than one transmitter?
Пікірлер: 265