I dont care what Everyone says about you Devin i reckon your allright cheers....
@visceris35
Ай бұрын
Thank you for being so informative and explaining things for everyone to understand. Im pretty far off from wiring my car, but damn if im not gonna be ahead of the game when i do. Keep it going man. Love it 👍🏻
@Burndown
Ай бұрын
I have one in my Winnebago! Bad ass fan!
@frankconte5545
Ай бұрын
I have the twin Chevy VOLT 12" fans on my rig with Holley EFI PWM control, loved your video on that setup. Bought them NEW from GM dealer last year for way cheaper than aftermarket vendors and it's been working great!
@Burndown
Ай бұрын
@@frankconte5545 hell yeah! Have them on my car now. I’m work on some 15” mounts as well so I’ll let everyone know when those drop!
@masoncampos7043
15 күн бұрын
@Burndown the prototype is looking good Dane. Can't wait to see the finished product. If I can score a fan I might be interested in picking one up.
@jasonbrinegar6759
Ай бұрын
Bless you!
@gafrers
Ай бұрын
Greatly explained and shown, as usual 👍👍
@jphorns730
Ай бұрын
Thanks for this !!!! Just picked one of these up to test against my dual 500watt spal set up so awesome timing as it should be delivered soon !
@mhtate3626
Ай бұрын
Appreciate the PWM info, that's fairly straightforward.
@Sleeperdude
Ай бұрын
Thanks for sharing
@b9350t
Ай бұрын
Great video!
@Jvcomet
Ай бұрын
Thanks👍
@Jonny_trans
Ай бұрын
Thank you for the info! I’m going to upgrade my 12 Silverado fans(3relay) to the 2016 (pwm) ones. My stock 2012 ECU can control either. The oem shroud on the 2016 fans is a TON better. Thanks for the info Devin!!
@TechMarcB
Ай бұрын
It’s a bad hammer for sure. Got it on my mustang
@TechMarcB
Ай бұрын
Just so you know, it doesn’t have to be a ZL1. Can come off an SS too, just has to be the V8. Mine is not ZL1
@363gray
Ай бұрын
What year mustang ?And what size radiator?
@TechMarcB
Ай бұрын
@@363gray a fox, and I want to say it’s like a 22x24 universal radiator something along those lines
@garyhamilton2240
10 күн бұрын
Hey Devin can you use one of theses fans on a none EFI car( carburator) is there a stand alone controller? I looked online but couldn't find anything. Thanks love all the videos great job
@mcss-ll4yg
Ай бұрын
Besides the huge amp draw could this fan be operated steady state and survive?
@ford9050
Ай бұрын
Nice video. I have installed 3 of these in fox bodies and had Dewitt's build the shroud. Can you make a video on how to set up fan duty cycle on a Holley screen?
@theholleyefiguy
Ай бұрын
You didn’t watch the whole video did you
@ford9050
29 күн бұрын
@@theholleyefiguy I did. I meant the Holley touch screen dash.I set my fan up off your dual truck fans. In that video you had freq @ 100. does 128 pull more cfm?
@flinch622
Ай бұрын
The quality in this fan is not in the wattage, but the collector ring molded around the blade tips - that's free efficiency. But this does need a shroud to stand it off the radiator about an inch. As for the 200mph problem [shown at 8:44]... I'm not sure I would cut that flange off but rather look to shim & increase clearance and avoid the unintentional spin welding of the plastic. That feature does add strength and stability, plus... I would be a little concerned about ruining balance. Personally, 80amps is rediculous... and I would try to find something that can work on half that or less.
@TeamHybridRacing
Ай бұрын
Have you found any instances of folks using one axis with vehicle speed and turning the fan(s) off at a certain mph? I'd imagine its just a case by case situation as to if possible and what speed if so. I have a large IC in front of my rad and spal setup but hadn't really messed with it much to see how it would do.
@davidburke6785
Ай бұрын
I use MPH for the X axis on my drag and drive car. Works great.
@TeamHybridRacing
Ай бұрын
@@davidburke6785 that's what I was thinking. Last two events I've just left it but curious I'll prob just have to play around with it. What speed do you shut it off at?
@davidburke6785
Ай бұрын
50MPH
@TeamHybridRacing
Ай бұрын
@@davidburke6785 appreciate the info. I'll prob try around there and see how it does. My shroud has flap built into as well
@mattsantoro1480
Ай бұрын
Hey Devin How do you cut the ring off.
@jcook69camaro
Ай бұрын
Is there a way to make the fan come on at say 50% when the a/c is on?
@lukeedwards6774
Ай бұрын
Hello, Have a slightly off topic question do you PWM your water pump as well?
@theholleyefiguy
Ай бұрын
I do not
@FadetoBlack1463
Ай бұрын
Sorry if I missed it. How many amps does it draw?
@mhtate3626
Ай бұрын
11:27 he says 65 amps on 16 volt, potentially works out to 80+ on 12 volt - timestamp for my own quick reference. Good option to have since I need to revisit my own cooling system.
@FadetoBlack1463
Ай бұрын
@@mhtate3626 Thank you.
@SleeperC10
Ай бұрын
Why is the rpm scale so high?
@MPHMayhem
Ай бұрын
Is it bad I talk to your videos 😂
@theholleyefiguy
Ай бұрын
Not at all
@racetech540
Ай бұрын
How does it compare to Deltapag fans?
@deltapag5051
Ай бұрын
I don't think Devin tried the 18" Delta PAG fan. The Delta PAG 18" moves 4,100 cfm through a 2.25" core, is 2.70" thin, 28amps at 13vdc, weighs 4.6lbs, only costs $425. No need to cut anything down or modify. The Delta PAG is 25% more efficient than this Spal fan. Most importantly, there are no electronics in the motor, so the only spare you need is the ECM. Also, the Delta PAG motor is only 3" in diameter, so doesnt block ram air. Devin should try the Delta PAG 18" fan, I think he will be pleasantly surprised.
@buiItnotbought
Ай бұрын
How much more did it flow vs delta pag?
@screamineaton
Ай бұрын
this fan on full tilt can move 4k+ cfm through a 2.5" thick core. which is what delta pag rates their 18in fan.
@deltapag5051
Ай бұрын
The Delta PAG 18" moves 4,100 cfm through a 2.25" core, is 2.70" thin, 28amps at 13vdc, weighs 4.6lbs, only costs $425. No need to cut anything down or modify. The Delta PAG is 25% more efficient than this Spal fan. Most importantly, there are no electronics in the motor, so the only spare you need is the ECM. Also, the Delta PAG motor is only 3" in diameter, so doesnt block ram air. Devin should try the Delta PAG 18" fan, I think he will be pleasantly surprised.
@buiItnotbought
Ай бұрын
Wow those are crazy high numbers for such a thin fan. I got flexilite monster dual 16" they're massive. Its advertised at 6000 cfm. But they test it without any restriction right?
@exidous6831
Ай бұрын
@@buiItnotbought They're worth giving a go. I have a pair of Delta PAG 12" and I don't think they ever break 50% on my LS7 with a 14" tall radiator.
@nateemmett4485
Ай бұрын
@@deltapag5051 are they able to be controlled through the Holley?
Пікірлер: 52