3D print your bracket (back plate to case) for the 4k capture card
@macking104
8 ай бұрын
Duct tape or gaffer tape would be faster and easier!
@georgem.6136
8 ай бұрын
3D printing the bracket is a great idea!
@Hondo132
8 ай бұрын
Either that or switch the motherboard, no structural support on the card can't be good for it long term
@baldertech
8 ай бұрын
I thought the same thing
@ghomerhust
8 ай бұрын
@@Hondo132 there's not a ton of variation in motherboard layouts for this gen of TR
@RivetHead
8 ай бұрын
I love that the build is as unique as joe. I wouldn't expect a build for him to be any different. I love everything about it.
@Skukkix23
8 ай бұрын
I think 2 exhausts on the rad will work better, the tower cooler will get plenty of air, now you just feed it more hot air.
@LifeStartsAtrpm-ru1xo
8 ай бұрын
That 4090 will produce 450 - 600 watts of heat during gaming. The rad will need to be an exhaust indeed.
@aeasus
8 ай бұрын
I wonder if the capture card could have been mounted vertical in place of the HDD cage with an extension ribbon. There seems to be enough room although case mods would be needed to mount it. Also, mounting the radiator in the high position as exhaust could have provided 3 exhaust and 4 intake fans for a better air balance if the GPU's thermals are good. Just some thoughts. I look forward to seeing some tests :)
@JayberryMedia
8 ай бұрын
It's the most glorious $10,000 jank I've ever seen. I love it!!!
@puu808
8 ай бұрын
Well done guys! Looking forward to the setup/benchmark video!
@Thaychris
8 ай бұрын
I would have just put Kapton tape on the back of the elgato and called it a day 😂😂😂
@bellicsson4171
8 ай бұрын
cool build also i like how you managed to fit the fans under the capture card, i like to do diy / kinda junky solutions like this, but in my opinion you could have chosen a more traditional case, all glass panels are kind of boring and remove airflow points
@johnbowser2612
8 ай бұрын
Great System Joe! Merry Christmas to both of you!
@thegeekchef5278
8 ай бұрын
if your wondering about the air flow. Do something a dry ice, or smoke flow air flow check.. Seal up the case, and turn fan on, then push some clean smoke or fog through the case.
@TimothyVinyard
8 ай бұрын
I just love unorthodox builds. Would love to see a smoke test of some kind to test the theory of the airflow.
@Bill_the_Red_Lichtie
8 ай бұрын
Congratulations Joe, and Merry Crimbo to you both!
@mr.guillotine3766
8 ай бұрын
Well, damn, thank you for not making me wait very long for part 2! lol
@DaveDangles
8 ай бұрын
You could use spacers behind the top fan above the radiator to pull it forward to be flush with the rad fans.
@pretzelparkour
8 ай бұрын
The jank in this build is so strong and I love it.
@Zonker66
8 ай бұрын
Was going to be really upset to not see how fast it is... and might have been nice to comment on the noise from all those fans, but I'm sure you'll cover that in the testing. Beautiful beast.
@Jay_the_Caffeinator
8 ай бұрын
Yes!! Part 2. Not sure why I didn't get the community notification for the vote. Either way. I really am looking forward to solving some of these airflow issues. Caffeinator out for now. I'll edit when I get with the whole video 2 times.
@Fergunator
8 ай бұрын
Merry Christmas and congrats on the beast PC Joe!
@MichaelGalletly
8 ай бұрын
Congrats, Joe! Here's hoping you don't have to rewire your home office.
@bikedoc4145
8 ай бұрын
Congrats Joe, having Paul do the final hookup of the cables and stuff was pretty smart! I'm jealous 🤔
@Neolantis
8 ай бұрын
I love this set up with the modifications The reason is because sometimes I come across the same issues And I always feel dumb when I do things like this. Lol Watching you do similar mods makes me feel better about myself So thank you paul and joe.
@navarropuff187
8 ай бұрын
i just wish I was as lucky as Joe. Merry Christmas, guys!
@dmcd7333
8 ай бұрын
For every unique problem, Paul has a creative solution. Fan solutions was pretty interesting.
@TECHiSuppose
7 ай бұрын
Creative problem solving! I saw mention of a firmware update in the previous video offering bifurcation on all slots, so for the follow up video this build should look really clean with a bit of adjustment.
@sirfelix2020
8 ай бұрын
Congrats Joe
@johnburnsiii920
8 ай бұрын
I'd print a plate for the 3-D card. And then cut up a nice piece of black cardboard for the air direction plate. Excellent build
@JohnThunder
8 ай бұрын
God Tier Build PC! Amazing stuff Paul! 😃
@stevenhodgkinson7462
8 ай бұрын
Just biulding a high end pc for the first time in 25yrs, the difference in hardware are day and night things have moved on so much from the 80s and so has the prices 😅 Just hope mine turns out as good as that paul, merry Christmas to you all brother.
@NWGR
8 ай бұрын
Congrats on the new build Joe! Well deserved. And kudos Paul for hooking your bro up. I love zip ties. They solve so many issues, and not just in regards to tech. One of mankind's greatest inventions. Merry Christmas and Happy New Year!
@jeremybarber2837
7 ай бұрын
This build is phenomenal. I really love the dual top exhaust fans. Congrats Joe!
@skyvzneldaddy9218
7 ай бұрын
me too!
@hangnailh.9659
8 ай бұрын
Nice seeing both of y'all in the video interacting
@jasonlewis810
8 ай бұрын
I just like that a HEDT build can be like any other build, PC build or just home project build... Make it work. Fudge around all you need, just make it work. Fun build and vid.
@bbtube11
8 ай бұрын
Absolutely gorgeous build, congratz Joe!
@flaco111
8 ай бұрын
Congrat's Joe, beastly rig! Loved the work arounds, no fear on a high dollar rig
@bobyjane1234
8 ай бұрын
I love Getho looking builds, keep ‘em coming
@99AudiMan09
7 ай бұрын
the explosion @13:09 got me...I was not prepared
@howardpayne4128
8 ай бұрын
I spotted that yellow corner on the fan, nice one!
@nadtz
8 ай бұрын
Glad I got to see how the PCIE layout on this board works out with more than 1 card, I had figured it might be problematic and kind of wonder why Gigabyte went with it. Kind of a shame as I mostly like their Aero boards but between the lack of PCIE slots and the funky layout I think I'll plan on going with the Asrock board if I do end up building myself a TR system next year. Also you can get SP5 / TR5 coolers that orient front to back instead of up down if CPU temps end up being an issue. Be interesting to see how it benches once you get to that.
@ajmmorrow159753
8 ай бұрын
So happy for Joe! Such a nice rig
@eliotwildermann
8 ай бұрын
Feedback time = merry Christmas paul joe and your family's 🎄🎄🎄😊😊😊😊
@John-King
8 ай бұрын
I loved watching you gents build the PC together! Well done on the build! Please do more videos together.
@dividion8102
8 ай бұрын
When you need an unusual part to solve a spacing problem, and you'd rather avoid destructive modification, the answer is always "3d print something". It's this decade's version of "just use duct tape". A printed part would make a good-looking piece to hold the capture card in the back., and for the airflow redirection, I can't believe you said "cardboard". A $10,000 build deserves better, and you can get a Bambu Lab printer for a few hundred bucks. (though personally I'd recommend the P1S w/ AMS - they absolutely rock)
@debsmcd6
8 ай бұрын
I physically jumped out of my skin when you did the countdown to switch on.! Liking the workarounds etc.
@markspain6609
8 ай бұрын
Looks great, looking forward to seeing performance/benchmarks. Happy Christmas Paul, Joe and to you all out there, have a fab time 🙃🖖
@annnnonnymous
8 ай бұрын
Cardinal rule of modifications - if you didnt get hurt and it works then its perfect. Im all in with the modify as necessary to get it to work and maybe revisit it later to pretty it up, perhaps... one day...
@gasracing4000
8 ай бұрын
Nice build Joe. Very nice.
@maxwellrobinson2924
8 ай бұрын
Merry Christmas Paul and Joe!
@kevinl1664
8 ай бұрын
everything about this is awful and i love it. so many times we buy parts and just....hope it works but then those weird things pop up cause hardware is weird! lol keep it real paul and joe!
@blondiejoe
8 ай бұрын
Hey Joe, congrats, like, beastly rig.
@mrbill_oh_no
8 ай бұрын
Adapt, react, re adapt, ACT. Zip ties are excellent
@jeffduncan6165
8 ай бұрын
Looks awesome, love the one colored Noctua corner Joe! LOL
@GrizzAxxemann
8 ай бұрын
I'm laughing my ass off at the trials and tribulations of this build... because I just went through the same nightmares finishing off my own build. One suggestion for that bottom rad/fan tray: get some 3M double sided tape. The black foam stuff. A little piece under each tab will keep it still and serve as some vibration damping.
@JitHster
8 ай бұрын
I like this alot. All the unorthodox solutions are just great and something I would have done myself and this make this build so real world 😅
@zenusepsilon
8 ай бұрын
...I love a good out-of-pocket Wayne's World reference
@AlphaXray
8 ай бұрын
Pretty sure that’s in-pocket for this channel.
@thebigopu2007
8 ай бұрын
You could use a Dremel to cut an opening for that back panel and capture card.
@Mikey-Likes-I.T
7 ай бұрын
get a riser cable, put the cable underneath the video card so you could put the capture card in the slot above the video card, that way it goes in one of the slots for the cables to plug into like it is supposed to.
@boblekewl
7 ай бұрын
Can’t wait for part 3.
@VaingloriousGaming
8 ай бұрын
if it's all functional and Joe likes it, who cares what anyone thinks about brackets and zip ties and other shenanigans. Great build!
@Joeker8171
8 ай бұрын
Congratulations Joe. Merry Christmas to you Joe and you too Paul
@MattAK
8 ай бұрын
When I worked desktop support a number of years ago we would often just use gaffer's tape to hold SATA SSDs in 3.5" drive bays on old workstations. We couldn't be bothered to buy adapters for them since it was likely the last time those systems would get assigned out before being recycled. The zip ties on the fans reminded me of that time, thanks for the member berries. If it works, it works!
@MrBlack-zb2eg
8 ай бұрын
thinking on your feet Joe! Always a good learning experience for all!
@JeremiahSpoon
8 ай бұрын
I love everything about these videos. They are so real world. Just a quick question - from the angle of the camera, possibly, it looks like the CPU cooler is sagging. Is it just the angle of the camera?
@orl2222
8 ай бұрын
For the back of the fan mount use a lil blu tac to hold it down on the rear.
@polypolpol
8 ай бұрын
13:06 Thanks Joe 🥲
@mbraun777
8 ай бұрын
As I'm sitting here sewing up a rip in my britches, having just watched part 1, I'm reminded of the adage 'necessity is the mother of invention'. I've also watched JayzTwoCents do (shiver)... unspeakable things to custom machines, that actually came out pretty cool. So, it's ok. Besides, if you're working with thin stamped sheet metal parts, things don't always fit, especially when they're upside down.
@1gatomon
8 ай бұрын
That Boom add as you started the computer made me jump!
@rynosraceroom66
8 ай бұрын
Hell yeah , Merry Xmas guys
@usleadershipareliars
8 ай бұрын
Best build ever Merry Christmas Joe you somebi...
@jordanturner7821
8 ай бұрын
Id like to see a video one day of how cache m.2 (like the ones you have there) vs dram m.2s works out for transferring large video files and scrubbing timelines.
@KraytonNHG
8 ай бұрын
Congrats Joe!
@Olaf-Lingen2023
7 ай бұрын
I hope you had a nice Christmas from Germany. And will hopefully have a nice and happy new year.
@ervingoss5442
8 ай бұрын
I remember the phrase: My car is held together with duct tape and bailing wire. Well, now my computer is held together with zip ties and double sided tape. Great job you two.
@user-bl2gj1dk4s
8 ай бұрын
Paul can you show us your must do system checks and must setup tips for a rig like this to get the most out of a system that can also apply to someone’s that isn’t quite at that range
@Pembroke.
8 ай бұрын
I absolutely❤❤ it!! Paul and Joe, it works for you and that is what matters. Not to mention, Kyle would love it guys
@vr0k3n
8 ай бұрын
you guys might wanna hit up Jay (or get a 3d printer) and make some support pieces of that capture card and that separation between the top fan and the radiator behind the case. Also, I think the back fan should go intake as well and have a reverse airflow scenario where you pull aire from the back and bottom and exhaust on the top. Otherwise that heatsink is gonna have a hard time with air being pulled from either side, specially when the bottom fan of the heatsink is gonna be completely blocked by the PCIe card
@MrUniq
8 ай бұрын
Not only is it a killer PC but it’s a large room space heater!
@Pembroke.
8 ай бұрын
Merry Christmas everyone!!!!!!!! Now, pass the eggnog and the rum
@rynosraceroom66
8 ай бұрын
pci adapters were cool ,learn something everyday , thx
@steverussell7005
8 ай бұрын
This is getting to dawid levels of jankyness with the capture card. Love it.
@Bicketybam68
8 ай бұрын
That back plate you removed, you could 3D print a replacement with the cutout and paint it black and if you did it right, would probably look like it belonged there in the first place. The same with any clips you might need to make it tidier (not that you haven't already done an excellent job, but there is always room for improvement in everything we do). Cheers.
Love the fan setup! Can't wait for benchamark video
@georgem.6136
8 ай бұрын
Woop woop, want to see how you map all those drives
@WaterZer0
8 ай бұрын
In the follow up video, benchmark both Joe's old PC and this one side by side. Hope the setup goes well!
@isidroayala8415
7 ай бұрын
Such a dream 🤤 great work just finished the last 1200$ build with my son and created some memories with your guidance even though it was a 2 minute montage 😂 we got through it. 🙏
@russellsprout93
8 ай бұрын
That airflow pattern is either absolutely genius or...not. I will not claim to be smart enough to know which. Well done as always
@VolcanoPenguin
8 ай бұрын
I can't say much about jank methods to help functionality. I'm using fishing line to hold up one of the tube runs in my build because the sag was entirely tilting. Congrats Joe, you deserve this upgrade, and merry Christmas!
@aps5150
8 ай бұрын
*MacGyver nods in approval*
@jdeclaire1986
7 ай бұрын
Adapt and overcome... thumbs up!
@JuiceboxDesmond
8 ай бұрын
I'm so mad about that gaping hole and the zip ties
@MindstabThrull
7 ай бұрын
I would recommend also some kind of divider between the top fan and the other two fans on the back side, but on the inside, because that will reduce the air flow from the intake fans going straight to exhaust. Looks awesome otherwise though!
@kalmtraveler
8 ай бұрын
Paul this is the best kind of build - jank but functional. I approve 100%.
@Gryfang451
8 ай бұрын
Horrible? No. Brilliant? No. Horribly Brilliant in a super janky way? Absolutely!
@ian.pasasadaba
8 ай бұрын
Happy holidays guys build is awesome as always
@scottyb069
8 ай бұрын
For that capture card, I would have just wacked on some Kapton tape to cover the PCB and been done with it. Two layers if you were really woried about it shorting out. Nice build by the way :)
@michaeloneill1360
8 ай бұрын
Merry Christmas Paul & Joe & to your Families as well! Well done with 'McIvor' Fixes & Workarounds for the Components that didn't quite Fit! Looking Forward to Part III
@7shortofperfection
8 ай бұрын
You could also 3d print a shroud to isolate that exhaust fan
@anthonyferretti28
8 ай бұрын
I would use a steady hand and some aluminum tape to fix the gap on the bottom. You could even just color it in with a black magic marker! Done!
@offdabeatz
8 ай бұрын
You will most likely need a dividing piece on both sides of the fans. Otherwise you may lose too mush fresh air that is needed to keep everything cooler during heavy loads.
Пікірлер: 488