Just a suggestion you should show how to make that jig for a miter saw
@robsim4692
Жыл бұрын
I know this video is 4 years old but just thought I'd tis the season by sharing what I like to do! I like to make my cuts crooked, short, long and that includes when I measure twice! In fact I cut so much that ends up wrong, I just roll with it and call it abstract woodworking, for sell somewhere on the internet near you!
@frankandrade4374
2 жыл бұрын
Would it be easier to nail the inner angles first then attach the outside points together at the end?
@pamelahallissey20
5 жыл бұрын
This is the most descriptive tutorial I've found on this, thank you! I wasn't alloting for the 1/8"for my blade (beginner woodworker!!) Can't wait to try this.
@jessebitoy7747
2 жыл бұрын
Thank you very much for this great idea! Me and my boys did a practice and we will make one for their room decor. Genius!!!
@86abell
Жыл бұрын
I find it to be easier to nail the 36* angles together first. Then Shou Sugi Ban all sides before assembly. Then just clear coat it. Good video. Thanks
@johnmarshall3735
3 жыл бұрын
GOOD JOB
@robb4751
5 жыл бұрын
You should pin nail as your putting the start together. You can get a better angle and you won't have any blow outs.
@hansdegroot8549
3 жыл бұрын
Interesting video. Thanks for sharing. I'll try this for next Christmas.
@dennisg11348
2 жыл бұрын
Good job! Thank you for sharing.
@KBBAKTHA
5 жыл бұрын
Brilliant build video of a star, a ever favorite WW project. Thanks for sharing
@fiberinspector1304
6 жыл бұрын
i use a pair of flush cutting nippers i got at Harbor Freight, (Hobby Lobby has them too). Cost $4.95, to cut nails that break through.
@fiberinspector1304
6 жыл бұрын
you 2
@rickthatcanadianguy
5 жыл бұрын
Very good instructive video.
@sandieyule1644
3 жыл бұрын
Very nice!
@DefonsoAlves
3 жыл бұрын
Muito bacana esse projeto.
@KostasAnnikasDeftereos
6 жыл бұрын
that is cool !!! you make it in a very simply way !!! thanks for sharing your ideas !!!
@VintageWoodWorkshop
6 жыл бұрын
thanks, Kostas! glad you liked it man
@bobleeswoodshop7919
6 жыл бұрын
Thanks for sharing , I still have a lot of learning on my RAS . This is going to help me play with my saw . Best Regards My friend Fun project
@VintageWoodWorkshop
6 жыл бұрын
awesome, let me know how your stars turn out!
@nitroman1999
3 жыл бұрын
good video man!!
@BacktotheBasics101
5 жыл бұрын
👍🏼 they’re beautiful
@VintageWoodWorkshop
5 жыл бұрын
Back to the Basics 101 thanks!
@jeanniealford4234
6 жыл бұрын
Great job.
@VintageWoodWorkshop
6 жыл бұрын
thanks!
@timadams3366
6 жыл бұрын
Ever try nailing opposite angles first?
@ermannodangelo1062
3 жыл бұрын
Why no wood glue, and much easier to nail the 36 degree joints first.
@woodworksbygrampies1284
10 ай бұрын
👍🏼
@andyboybennett
Жыл бұрын
You used a stop block when cutting on the radial arm saw; why wouldn't you use one on the chop saw? It wold make for more accurate angles and lengths and go faster than tediously marking the cut lines, trying to cut precisely to the lines. And it would go faster.
@andyboybennett
Жыл бұрын
After writing my comment I looked and saw that this video is 4 years old. I hope you read comments on old videos!
@billrobinson8939
Жыл бұрын
Nail all the 36° angles first with wood glue. Does anyone know how to find the leg length for a star with a 36" interior clearance? I'm using 2 x 6's to make a lawn decoration.
@davidevans5691
3 жыл бұрын
When you are nailing the short piece to the long piece to make the 5 parts, are you nailing the 54 degree end of the short piece to the 54 degree end of the long piece or what combination thereof. I have my pieces cut to dimension based on the original plans and cannot get the pieces in the right order. Appreciate any help where I’m missing something.
@tinakhan3964
6 жыл бұрын
Very nice design I love it I wish you can send me one
@pedrorios34
4 жыл бұрын
I'm new at wood working, but can you tell me what's the size of the wood you using for the stars.
@martinbilotta8375
6 жыл бұрын
I love the video. Can you tell me where to find the plans? Thx
@VintageWoodWorkshop
6 жыл бұрын
Martin Bilotta thanks, link is to the description
@timothybaker8234
6 жыл бұрын
Can't you nail the center joints first?
@VintageWoodWorkshop
6 жыл бұрын
I haven't tried that but the hot glue trick was really the easiest way I've found so far to keep the joints tight in the middle. I think the concern with nailing the center first is that it may be harder to close the point joints which are more obvious to the eye.
@opasworkshop8373
6 жыл бұрын
Great project my friend these look even better than your last batch!
@VintageWoodWorkshop
6 жыл бұрын
Thanks Opa, I took the time to really measure and double check this time and it made all the difference. Take care my friend!
@kirkmarino5258
6 жыл бұрын
They look great. Question......type and dimensions of the wood used? Thks
@VintageWoodWorkshop
6 жыл бұрын
Thanks, Kirk, I used regular pine 1 x 2 x 8' from Lowe's which are about $3-4 each. I could make two stars from each piece with the size shown in the vid
@Ghis1964s
6 жыл бұрын
LOL yep ;) "Focus You >^^>!!"
@VintageWoodWorkshop
6 жыл бұрын
exactly, keep your stick on the ice!
@manuelzapata5414
4 жыл бұрын
How long are the pieces?
@familiagreyhound4699
4 жыл бұрын
Demorou!!
@texasmadefella
6 жыл бұрын
Dont have a nail gun and clamping odd shapes like this makes it hard
@VintageWoodWorkshop
6 жыл бұрын
texasmadefella I have used just hot glue and that works too
@john3225
6 жыл бұрын
Nail the 36 degree first. It’s a lot easier.
@VintageWoodWorkshop
6 жыл бұрын
ok, ill have to try it next time. i thought it might be harder to close the gaps on the star points, no?
@john3225
6 жыл бұрын
It seems to work fine for me. But whatever makes it easier for you. Keep up the good work and the videos
@VintageWoodWorkshop
6 жыл бұрын
ok, good to hear....I mean I'll all about easier! Thanks brother, take care!
@1963JamesT
Жыл бұрын
nail the inside angles first.
@sophialow340
3 жыл бұрын
I am sure it could be improved. Check out the plans on the Stodoys website.
@jeffreycunningtown5730
3 жыл бұрын
Mine works too. I used the Woodglut plans and performed it without any problems.
Пікірлер: 58