This is awesome!!!! I need some Dallas Cowboys logos
@froglobster
Жыл бұрын
Are you a DC cheerleader? You got some uh ‘smoking hot’ recipes! Nice nails! Sub #11.
@felipemarie6490
3 ай бұрын
Niice
@brightonbard
9 ай бұрын
Update Dana, success at last I was cutting one of the beveis the wrong way, now all good thrilled skinny Thank you 👍 and a happy Christmas 🎄🎁
@jensfleischer5776
Ай бұрын
Schönes Video aber leider ist die Kameraführung nicht gut Schade hat mir sonst gut gefallen
@euniaturnbull3112
Жыл бұрын
Thank you love your video
@WoodworkingwDana20479
Жыл бұрын
You are so welcome!
@danclark8733
9 ай бұрын
My 92 year. Old father in law.
@TonyV_in_the_OC
10 ай бұрын
Thank you!
@billedwards2388
Жыл бұрын
Do you have an address to send photos?
@billedwards2388
Жыл бұрын
Need help. I set my board at 24degrees from the fence and miter base at 30 an I got no where 54 degrees. More like 35. I then switched the board to 24 degrees from the 30 degree from the angled cut on the base board. Cut again wit miter set at 30. Got worse down close to 24 degrees. I then thought what if I bring the base back to 90 and make a cut. It came up 54. I know that is the magic number we are looking for however I would like to learn what I did wrong on your jig instructions!! I am sending pictures accordingly!!
@DanaAnderson-yv9tt
Жыл бұрын
The jig was 90 degrees to start with and I glued and screwed my board on there at 24 degrees. I then put the jig up against the fence and set my miter to 30 degrees and cut the end of the jig where the 24 meets the blade at a 30 degree angle giving me a total of 54 degrees. Hopefully this makes sense. If not let me know.
@brightonbard
9 ай бұрын
Good morning Dana, I'm embarrassed to admit that I tried the stars yesterday and tried to size to a star 3" inches for the long piece and 1 and a half inches for the short and it didn't work 😭 🤣 I used 16x20 pine edging ? Any thoughts ? Paul 👊💥🍺
@yaowsers77
Жыл бұрын
What can you do if you don't have a brad nailer? It's glue strong enough?
@larryswisher7048
Жыл бұрын
Great presentation. Clearly explained and video/audio were very clear.
@WoodworkingwDana20479
Жыл бұрын
Great to hear!
@websterbehrens7837
Жыл бұрын
Thank you !Great video and explanation.
@WoodworkingwDana20479
Жыл бұрын
Glad it was helpful!
@reginamannings92
10 ай бұрын
Beautiful ! Love it
@KnotboredWoodworking
Жыл бұрын
You shop location is the most similar to mine. Curious to know what dust collection if any you have. Basement shops need a bit more love with dust collection. I do have a large door to the outside near my work space but Id rather keep them closed if possible.
@WoodworkingwDana20479
Жыл бұрын
I have a 70 gallon, 2 hp central machinery dust collector from harbor freight. I’ve had it for about ten years and it is still going strong
@gediminasmockevicius5994
11 ай бұрын
klasse Litauen
@FFRICH1
10 ай бұрын
what angels go together?
@WoodworkingwDana20479
10 ай бұрын
Put the 36 degree angles together so they form a v with a short and a long. Once you get 5 of those then attach your short end to your long end and it should form the star.
@tammygonzales-eastman1564
Жыл бұрын
what size did you trim them down width wise
@WoodworkingwDana20479
Жыл бұрын
2 inches but you can make them any length sorry for the wait
@kristingordon1683
Жыл бұрын
Thanks!
@WoodworkingwDana20479
Жыл бұрын
No problem!
@sweetpeas8206
Жыл бұрын
very, very dangerous cuts
@mandoreforger6999
Жыл бұрын
Not really. These are pretty standard cuts on a Miter or table saw.
@DiegoSambade
10 ай бұрын
dangerous??? come on!!!! really??? are you serious??? YKM!!!
Пікірлер: 31