Have you ever built your own equipment for your studio? Share your projects below!
@pavs8736
2 жыл бұрын
I made one last year: repurposed some industrial shelving to make a metal frame for the booth, moving blankets on sides and top, 4 diy gobos (wood frames, rockwool, mesh, wheels, nothing fancy) that interlock around it and can be used separately. when making something like this, a good idea is to use a little light inside and have an opening for air (I installed a spare USB computer fan that I turn on between takes), it can get pretty hot in those blankets. just large enough to sit with an acoustic or to sing standing up. great video and great idea👍for me this was a very inexpensive project, but makes quite a difference
@static-producelikeapro7845
2 жыл бұрын
that is a great Idea 💡 about the fan. I have a few of those for my racks. Love the gobo idea as well. Thanks for watching.
@andreirlmeier
2 жыл бұрын
only 19" Racks
@royschwaben9646
2 жыл бұрын
I built some BBC quadratic diffusers, but the room was too small so they didn't help as much as I'd hoped they would. One thing that did help is very thick foam in certain places. Kinda like the mirror trick, how you can have a helper hold a mirror against a wall and ceiling while you sit in your mixing position, anywhere you can see the speakers in the mirror will give quick reflections, so you can deaden just those spots and get a somewhat decent sound *in that particular spot*? I did the same mirror thing looking at a room mic, then putting a guitar amp where I was looking from. So the mic was listening to the amp the same way our ears listen to the near fields. It doesn't sound like Abbey Roads or something, but it damn sure doesn't sound like a spare bedroom either. Sounds surprisingly okay. Definitely usable. I just stole the idea and applied it to amp / mic instead of ears / monitors
@alex-kenivel
2 жыл бұрын
12 acoustic panels, 2'x4' wood frames filled with 4" of mineral wool insulation and wrapped in breathable fabric. Had my small daughter help me with the frames
@samgeiver
2 жыл бұрын
Wow 4 hours after this posted we watched and made a booth and OMG clean vocals!!!! thank you so much we had everything on hand 15 min build!
@Producelikeapro
2 жыл бұрын
Wow! That’s amazing Sam! Thanks for posting!
@static-producelikeapro7845
2 жыл бұрын
this is so awesome to read 🙏🏽💜
@rsdave809
2 жыл бұрын
Awesome idea thanks for the video! I've been considering something very similar. A few points that may help folks who build this ,what you are referring to in the video as unions are screwed couplings. What you needed are actual screwed unions. Unions are 2 piece fittings that allow you to connect pipe in the middle without loosening the pipe your connecting to, basically a swivel type joint (an image search would explain better). This would allow you to actually make in each piece tight and then make up the unions to connect the pieces. I would use teflon tape on the threads to assist in making in the pieces, this would allow the pieces to make in deeper especially if your just making in by hand. It would also aid in disassembly in case you needed to move it someday by eliminating rust interference in the joint. A pipe wrench or channel lock type pliers would really help to make a more solid structure. When I degrease pipe I just use a few drops of dawn mixed with water in a spray bottle and then wipe with a dry cloth.
@ryanwilson5936
2 жыл бұрын
I have a pop-up shelter that I use for ice fishing that makes a great vocal booth. Drape 2-3 moving blankets over it and it’s even better. They also make quilted insulated pop-up shelters that’s essentially thick thermal moving blankets made out of dual layer 600 denier fabric that I imagine would work very well also. So, if your an ice angler and have a decent shelter, you already have a vocal booth!
@static-producelikeapro7845
2 жыл бұрын
This is so cool (no pun intended) Love creative thinking to find a solution. I will look at these online to see what makes them tick for sure Thanks so much for watching and sharing your experiences
@ryanwilson5936
2 жыл бұрын
@@static-producelikeapro7845 Anytime!
@scottakam
2 жыл бұрын
Thanks, cool project. I think you could save a good amount of money and effort if you used PVC pipe. If you use 1 1/2" pipe, you can do pullups on it so strength would not be an issue.
@static-producelikeapro7845
2 жыл бұрын
fully agree about the PVC option with the larger pipe for strength. Thanks for the tip and I really need to get back to some pull ups in my life. hope you have a wonderful day
@Producelikeapro
2 жыл бұрын
Thanks Scott!!
@Producelikeapro
2 жыл бұрын
@@static-producelikeapro7845 you Rock!!
@jameslifetimelearner
2 жыл бұрын
@@static-producelikeapro7845 a piece of plywood to bolt the flanges for more stability,those blankets also come in white. Some deflection is needed, I hear resonances especially during vocal belting by your lovely assistant!
@andytullis8736
2 жыл бұрын
Great video.......I built a vocal booth for Linda. I actually made frames out of wood and then hung them off one of the corners of the wall placed installation in the frames and covered them with installation blankets. Lastly I made one more frame coming off the wall, used installation and blankets. I left the top open, to allow a bigger feel and not so dead sound. All for around $150.00....
@static-producelikeapro7845
2 жыл бұрын
Something tells me I should have listened to my father more when he wanted to teach me basic wood working skills. But alas here I am fabricated with pipes 🤷🏽♂️🙌🏽. I love the description of the way you build yours. Thanks for watching.
@Edmontonlad
2 жыл бұрын
For my ‘vocal booth’, I stuck 3M clips on the wall right near the ceiling in the corner of my room. Then I put matching clips on a couple of heavy moving blankets. With the orientation of the blankets and clips, I have them around me 360. Great thing about this method is I can put up or bring down the moving blankets as needed so it isn’t as permanent.
@static-producelikeapro7845
2 жыл бұрын
Nice 👍🏽 that is a really cool idea and way to keep the space versatile for sure. Thanks for watching.
@dralithi
2 жыл бұрын
My singer and I built bass traps using 2x4 wood for framing, sound dampening insulation in the core, black fabric from Walmart, and used a staple gun to attach the fabric. Easy peasy! We made quite a few of them, since his basement had no walls and a lot of space to fill.
@static-producelikeapro7845
2 жыл бұрын
that is for sure another great way!!! Must have looked great too. I personally have zero carpentry skills and had a good deal of pipe laying around and just went for it. 😂😂
@dpinskey
2 жыл бұрын
I am lucky to have exposed beams in my basement studio, so instead of building a frame I used Auralex glued to both sides of cheap screen panels that I then grommeted at the top corners to hang from hooks screwed into the ceiling beams to form a hanging enclosure around a vocal mic. I also screwed hooks along the exterior of the studio space so that I could then hang the panels along the walls to keep them out of the way when not in use. Works very well and relatively inexpensive - and very, very easy to assemble using heavy-duty double-sided foam tape reinforced with Gorilla spray adhesive.
@static-producelikeapro7845
2 жыл бұрын
Really great solution as well!!! Would love to be in a spot with exposed beams some day!! thanks for watching
@dpinskey
2 жыл бұрын
@@static-producelikeapro7845 the exposed wood makes for a very nice soft resonance without being slappy!
@nigelbentonakauapoap3691
2 жыл бұрын
WOW! Way to illustrate the need for some dampening and shaping of the sound... I currently don't have anything BUT my 'studio' space is pretty limited, I have been planning on building a kind of booth or at least a 'screen' of sorts... maybe some ceiling hung canopy of sorts... anything to kill the reflections but also be temporary in nature so the day job can also still function properly!! Thanks for this, the cogs are in motion!! 😌👍
@static-producelikeapro7845
2 жыл бұрын
yes depending on the space and how you need to utilize it , hanging options could also work very well. lots of luck building it ,hope it comes out amazing.
@nigelbentonakauapoap3691
2 жыл бұрын
@@static-producelikeapro7845 Hey Static! Will see how I go but thanks for the inspiration! 😎🖖
@FlameFlowe1337
2 жыл бұрын
I live in an apartment so I basically do a very janky version of this. I've got the mic on a stand in a reflection shield to cut back on the bounce, I have two kind of heavy duty tripods that are for video lights and stuff and put those to the left and right behind me and drape a cloth blanket of like 2,5x2,5 meters over the triangle. I set this up on top of those rubber tiles that you rest gym equipment on instead of the wooden floor and it cuts back on the room noise significantly. Without it you can hear the walls echo in the recording and with it, its so reduced that you would either have to listen for it very carefully or you don't hear it at all. Works like a charm and costs like 200 euros or something. Best part, it folds up in to such a small package that it hardly takes up any room to store but I would do a bigger blanket than 2,5x2,5 meters because it doesn't actually reach the floor.
@static-producelikeapro7845
2 жыл бұрын
thanks for sharing I was doing something very similar prior to constructing this booth so many different ways to get to the same solution hope you have a great day
@hankthepatriot3733
2 жыл бұрын
WOW!!! The vocal is alot warmer with the booth!!! Had a feeling it was going to work better, but genuinely impressed by how much!!!
@static-producelikeapro7845
2 жыл бұрын
It so aided in the consistency of recreating a recording scenario for me. And voiceover stuff really got better. Thanks for watching.
@Producelikeapro
2 жыл бұрын
Yes, fantastic Hank!
@grsfhhytff
2 жыл бұрын
I do a far more "cowboy" version of this using my absorbers, extendable mop poles and horse blankets. Yours is so much better. Whether it's slung together on the fly or purpose built this is a must for home recording. Your method would also be great for building a ceiling absorber for live drums.
@static-producelikeapro7845
2 жыл бұрын
That is a such a cool use of available materials!!!! Believe it or not when I was kid I spend a bunch of time around my dad’s friend who was in the rodeo, so I have slung my share of horse blankets!!! probably looks way cooler. Thanks for sharing your experience with us!!
@grsfhhytff
2 жыл бұрын
@@static-producelikeapro7845 the recording space ends up smelling like a donkeys balls but they're really thick and get the job done, haha. Also got your Alice Cooper reference. What an album. Hope to see more of you on the channel. Cheers.
@JamesJohnAgar
2 жыл бұрын
That's similar to the concept I was thinking off, buying a clothes changing/fitting room(that you see in clothes shops) small square and then replacing the curtains with more acoustic cloth.
@static-producelikeapro7845
2 жыл бұрын
It really helps when you can contract a permanent solution and lack large or walk in closets. thanks for watching
@Producelikeapro
2 жыл бұрын
Thanks James! You Rock!
@guitarandbeyondplus
2 жыл бұрын
I live in an apartment building and need to cut down the sound of my vocals. Does this type of booth help? Have you ever measured the dB of a vocalist when not in the booth and then with them in the booth? Measured both times from outside the booth.
@ORACLEBALL
2 жыл бұрын
Former well guy / plumber here Those pieces you call unions are actually couplings. There are pieces called unions though, and those are great because you can join preassembled sections of pipe together without compromising tightness of joints. Unions would also make it much easier to take down and reassemble if this would be something that someone would like to take down and put together quickly if they have limited space / want to move the booth. Would also make the assembly go quicker too. Would recommend people building this to use unions instead of couplings! Hope this is of help. Anyways love the build! I'm going to have to build this soon!
@static-producelikeapro7845
2 жыл бұрын
Amazing and helpful info!!! I just recently learned this from a friend of mine who is a plumber as well while we took the booth down for our move. Thanks so much for sharing your knowledge!!
@mattd7650
2 жыл бұрын
I really think some of these help with quieter singers and voice overs. I think you hear more resonances the louder a singer gets though. I've built a small vocal booth before. You can tell when you hit those certain frequencies. Plugins like sooth and smooth operator can help sometimes if you get some small build-up. Some high pass eq if you see the low end bump. Just my experience., though.
@static-producelikeapro7845
2 жыл бұрын
very very good points to be spoken of and noted thanks for sharing your experience with this. and thank you for watching the video
@Davo198
6 ай бұрын
More resonances from the room outside the booth you mean?
@royschwaben9646
2 жыл бұрын
Love this vid and idea. Won't help much for low end and low mids, but does "marvelously well" for taming higher reflections. If space isn't a huge concern, adding several inches of insulation on all sides and on top will help even out some of those other problem areas. But if that's not possible, try to play with placement of the booth inside the room. It's lightweight enough to put on casters and roll around. A decent starting point would be sort of near a corner, roughly 2/5 from the nearest two walls with the singer facing out toward the middle of the room, usually that will have the least standing waves and most even response, but that's not set in stone since every space is different, you gotta play with it and try different things to find the sweet spot.
@static-producelikeapro7845
2 жыл бұрын
Yes amazing advice !! I think with a plastic pipe fabrication it would easy to add parts to help with the insulating idea for sure. and casters would be a super smart addition. I did have this booth placed in a corner, and the Vocalist pointing towards the open room. But it would be interesting for sure to have gotten it further away from the wall. thanks again for watching and your feedback.
@royschwaben9646
2 жыл бұрын
I just enjoy quality content and am amazed we can watch this stuff for free. This is one of my favorite KZitem channels. Let's face it, 99% of us are working in sub-optimal spaces just trying to get the best quality result we can. That's not a bad thing, but it does require some flexibility and out of the box thinking. It's just an unfortunate fact of life that a small square-ish room with low ceilings is difficult to get an even response in. Everything is rhe wrong proportions and too close together. It's just acoustics. So we all (well, almost all of us, myself included) gotta make do with what we have available. Ideas like this can help a lot. Thanks.
@static-producelikeapro7845
2 жыл бұрын
I can fully relate and appreciate where you are coming from. I also enjoy the quest for the solution to working in space like that. Hope you have a wonderful day.
@leefchapman
2 жыл бұрын
I was JUST thinking about building a booth the other day. This is perfect. Thanks Warren and Static!
@Producelikeapro
2 жыл бұрын
Fabulous! Thanks Lee
@static-producelikeapro7845
2 жыл бұрын
That’s awesome 😎 and Thank you. Yes it was lot of fun to just assemble for someone like me having zero carpentry skills. please let us know how it goes.
@kiraviolet1563
2 жыл бұрын
I want to see the DIY vocal booth you make, now! 😆
@Producelikeapro
2 жыл бұрын
@@kiraviolet1563 you rock too!!
@Producelikeapro
2 жыл бұрын
@Stefan Sine haha good…Alphabet and the Metaverse are following us hahaha
@FreestyleGalaxyNMore
2 жыл бұрын
Make sure to pressure test for leaks!
@static-producelikeapro7845
2 жыл бұрын
yes yes, how can I have forgotten. good thing the inspector wasn’t coming. 😎 thanks for watching.
@1955DavidH
2 жыл бұрын
Just use 1” X 2” wood and put it together with bolts washers and wing nuts. If you must use iron pipe clean it and paint with flat black paint!
@static-producelikeapro7845
2 жыл бұрын
great tips I am quite hammer challenged so washing and painting sounds like the way for me 😂 thanks for watching the video
@JamesDriver40
2 жыл бұрын
We built the desk for my room. Ikea drawer units holding up a jointed pine slab. I installed desk grommets to hide the cable clutter. Rack units for desk legs were outside of the wife-acceptance-limitations. At least I have some drawers so I can hide small purchases like effects pedals and microphones. We wanted to use a hardwood panel for the desktop but the saw at the store wasn't rated for 1-1/4" hardwood. The pine looks really nice stained, and I'm glad we didn't have to fill a bunch of voids. I'm currently wiring up a 4-send/ 4-return stage box. I expect to build some 2RU tall hutches to slide in under the computer screens at some point.
@HarleyBob957
2 жыл бұрын
I basically built the same booth except I used 1inch pvc plastic pipe, much cleaner, I also used the same sound blankets but I bought a grommet punch a installed grommets where I needed them to attach the sides of the blankets to the upright tubing. My total cost was $185 everything included. Totally worth the investment.
@mekkoband3488
2 жыл бұрын
I built acoustic panels, two 19” racks, an electric guitar, and monitor stands and saved some money by doing so. Using some self made equipment gives me an extra layer of pleasure when working.
@andrewwest8334
2 жыл бұрын
I built my vocal booth by starting with a cheap ‘mis-measure’ double-glazed upvc door from a local window company and built a timber floor-to-ceiling frame around that. Plasterboard, acoustic insulation roll and foam panels etc. Probably cost around £500 ($800?) but it works perfectly and has paid for itself many times over.
@static-producelikeapro7845
2 жыл бұрын
that sounds like a really great way to build a booth thank you for sharing and thank you for watching the video
@Producelikeapro
2 жыл бұрын
Thanks ever so much for sharing Andrew!
@Producelikeapro
2 жыл бұрын
@@static-producelikeapro7845 You Rock!
@GaryStockton
2 жыл бұрын
I made something very similar with plastic pipe and moving blankets. My wife made a square cap for the roof, and I have hooks around the top of the frame to hang the blankets on the grommet holes. I also have a iPad Mini mount for my lines. I am not able to leave it setup unfortunately, but the setup and tear down only takes 10 minutes,.
@cozy2005
2 жыл бұрын
this is a great video. i love this channel and have learned so much in the time I've been watching, keep it up!!
@static-producelikeapro7845
2 жыл бұрын
Thank you 🙏🏽 Always an honor to contribute to the channel!!!
@iamtjking
2 жыл бұрын
How much sound leaks out from the booth? Would this be a good solution to keep recording from disturbing others in an apartment setting? Thanks for the awesome video.
@static-producelikeapro7845
2 жыл бұрын
I would not rely on it for full sound proofing needs. You can definitely hear what’s happening in there. It just limits reflections. hoping that helps thank you for watching the video
@Davo198
7 ай бұрын
@@static-producelikeapro7845really? I wouldn't have expected it to soundproof but I would have thought it would noise significantly
@johanjof5613
2 жыл бұрын
No laugths please, I am broke :I have bought a mobile shower tent for camping for 30€. This is my booth. Cannot put too much blankets on it though, otherwise it would fall on top of me while singing. May still be a good take though 🤣
@static-producelikeapro7845
2 жыл бұрын
love it!! To me this embodies the truest spirit of DIY, finding the best solutions for a need utilizing what is available to you!! Great stuff!! 😎
@Producelikeapro
2 жыл бұрын
Not laughing at all! Thanks for sharing!
@TheGDunkulific
2 жыл бұрын
I built a pvc version of a booth like this - with the exact same Amazon blankets - a month ago. Do you feel as if there is any additional benefit, or even drawback, from using an additional reflexion filter on the booth? I’m currently using a Troy studio in mine (which is in the booth in an untreated room) and I want to know if that is making the sound tighter or possibly harming the signal from additional resonances or cancellations
@nicdee316
2 жыл бұрын
Great video, and very good rendering of an awesome song, thanks Static and Kira !
@static-producelikeapro7845
2 жыл бұрын
Yes Kira truly made this video way more sonically enjoyable by helping with the awesome samples. Thanks for watching
@victor2510
2 жыл бұрын
Thanks for the vid. The Office reference was funny hahahahahaha
@static-producelikeapro7845
2 жыл бұрын
Got to give the dundie to Kira on that one… thanks for watching
@bobbykanemusictube
2 жыл бұрын
My entire space is about the size of three of those booths. I really need to learn how to isolate it better. But something like this won't fit. The ideas, however, are still perfectly sound. (Pun ALWAYS Intended!) I just need to learn how to adapt them to a ver irregular shaped, tiny space. Thank you for sharing this. Rock on, STATIC.
@snippletrap
2 жыл бұрын
Those pipes are heavy metal, man
@static-producelikeapro7845
2 жыл бұрын
this is very true and my foot found out the hard way but it was worth it thanks for watching the video
@djvidual8288
2 жыл бұрын
Great Video!
@static-producelikeapro7845
2 жыл бұрын
Thank you 🙌🏽😎
@Producelikeapro
2 жыл бұрын
Thanks DJ!
@Producelikeapro
2 жыл бұрын
@@static-producelikeapro7845 You Rock!
@bobbyboyderecords
2 жыл бұрын
How can I drown out the sounds of children screaming? The room is a 6 X 6 foot room in the basement of my house. Would your system work for this issue?
@HitTheRoadMusicStudio
2 жыл бұрын
Love it, so helpful tips and a cool-looking booth! Who wouldn't like to record in this cool place? 😍
@Producelikeapro
2 жыл бұрын
Thanks ever so much Ady!
@static-producelikeapro7845
2 жыл бұрын
Oh Ady you old charmer, you 😎🙌🏽
@Producelikeapro
2 жыл бұрын
@@static-producelikeapro7845 he certainly is!
@RichardShekariNigeria
2 жыл бұрын
Great topic...
@Producelikeapro
2 жыл бұрын
Thanks Richard!
@static-producelikeapro7845
2 жыл бұрын
Yes so many ways to enhance our spaces to get them working for us the best they can. Thanks for watching.
@djpsycosmiley1
2 жыл бұрын
Thank you for the video and great job on the booth.
@static-producelikeapro7845
2 жыл бұрын
Thanks for watching. Glad you enjoyed it!!
@TheGDunkulific
2 жыл бұрын
Thanks for the video! I built a pvc version of a booth like this - with the exact same Amazon blankets - a month ago. Do you feel as if there is any additional benefit, or even drawback, from using an additional reflexion filter on the booth? I’m currently using a Troy studio in mine (which is in the booth in an untreated room) and I want to know if that is making the sound tighter or possibly harming the signal from additional resonances or cancellations
@static-producelikeapro7845
2 жыл бұрын
for the set up I had I didn’t require any additional material. however I didn’t realize how bad I even needed the booth until I made it and got to hear the comparisons. so my best advice is to experiment tracking with your additional treatment and not. it raises the idea in the spirit of experimentation on how different materials would respond overall. thanks for watching 🙌🏽💜
@Producelikeapro
2 жыл бұрын
@@static-producelikeapro7845 great stuff!
@chrisibbetson
2 жыл бұрын
You wouldn't benefit much from an extra reflexion foam filter, all that does is reduce mid to high frequencies going into a room and bouncing around back into the mic, which, is effectively what this booth is solving and more. And the curve of these filters in close proximity to the mic does have an effect on the sound.
@yourordinarypieceofshite8982
2 жыл бұрын
Yes
@leefchapman
2 жыл бұрын
HOW?!
@yourordinarypieceofshite8982
2 жыл бұрын
@@leefchapman wha ?
@davidasher22
2 жыл бұрын
I would suggest using a reverse threaded coupling for the top piece. That way when you thread left, the right side also threads at the same time. Same thing with the horizontal cross bars. Screw a short “shoulder” piece of pipe into one of the tees (one on both sides) and use the full pice with a reverse coupling to join the cross bars. Otherwise, you’ll never get those areas truly tight. You could also use a fitting called a “union” for the same purpose but they are a little more bulky.
@static-producelikeapro7845
2 жыл бұрын
Yes!!!! I learned about this after when my good friend who is a plumber came by and I was showing him the booth. He said exactly what you said 😂🤷🏽♂️ I am always learning. And that would make assemble smoother for sure.
@davidasher22
2 жыл бұрын
@@static-producelikeapro7845 awesome! Yeah, I worked as a plumber during my “struggling musician” years. 🔧 🎵 Figured I’d throw my two cents in. 😃
@static-producelikeapro7845
2 жыл бұрын
@@davidasher22 it is very very welcomed !!!
@jameslifetimelearner
2 жыл бұрын
@@davidasher22 1”Schedule 80 pvc with tees on floor with nipples and caps for stability. Only they might pass out from the glue fumes.
@davidasher22
2 жыл бұрын
@@jameslifetimelearner yeah. That’s probably what I would do too. You could probably fill the PVC with something if it felt too light or flimsy. I guess 1” schedule 80 would probably do the trick by itself though.
@berkeleybernie
2 жыл бұрын
Don't want a permanent structure (i.e. your studio is also your bedroom)? Get a few sets of decent lighting stands, some heavy duty backdrop extensible crossbars, as many moving blankets as you need (hint: buy slightly less heavy blankets for far lower cost and double them, if needed, for more mass; I bought a grommeting kit and grommeted myself), and some curtain hooks. Assemble your booth in less than 15 minutes and tear it down in even less. A variation here (single wheeled center-mount T-stand rather than 2 separate stands with crossbar): kzitem.info/news/bejne/lZCbq3d4cGiBl6Q
@alexeysmirnovguitar
2 жыл бұрын
Cool project. If I ever decide to build a vocal booth, it would be much bigger size than tis one. I like the recordings of quiet stuff, but I also hear some serious limitations for more powerful vocals. The bigger the room - the better.
@Davo198
7 ай бұрын
I don't think that's true at all for vocal booths. Where did you get that from?
@notjustphotography
2 жыл бұрын
Would it not be easy to use 2 x 4 wood frame?
@static-producelikeapro7845
2 жыл бұрын
with the wood and skill it would be a great option. Many ways to get a very similar result. Myself I have zero carpentry skills and should have listened to my father more when younger. So I am way handier with pipe fabrication, also I have a few tables and shelves of the same esthetic. Thanks for watching and the feedback 🙌🏽
@MIKEBORGIA
2 жыл бұрын
I dig the edits! Great segment
@static-producelikeapro7845
2 жыл бұрын
Thank you good sir 🙌🏽 Hoping you are well
@Producelikeapro
2 жыл бұрын
Thanks Mike!!
@Producelikeapro
2 жыл бұрын
You Rock Static!!
@static-producelikeapro7845
2 жыл бұрын
@@Producelikeapro Hey Warren, Mike is an old friend, truly great song writer and has one hell of a voice. I have even had the pleasure back him for a show. We have also shared many of marquise over the years together with Ours and Mike on the shame show.
@MIKEBORGIA
2 жыл бұрын
@@static-producelikeapro7845 DOing well. I cant wait to come see your new space. I'm happy for you guys.
@CamRebires
2 жыл бұрын
I wonder how far vocals travel out of the booth, can you even hear the person inside? Looks damn effective
@static-producelikeapro7845
2 жыл бұрын
it wasn’t really designed too much for proofing and you could hear the vocals outside The intention is to limit the reflection that the vocals may experience in the open room as well as give the singer a sense of separation if the studio is just one room. and it does block some subtle background noise out but again it’s purpose was for limiting reflection A more permanent installed constructed booth using insulation and proofing materials would probably get you to what you are describing. thanks so much for watching the video hope you have a wonderful day
@CamRebires
2 жыл бұрын
@@static-producelikeapro7845 Fair point, thanks for taking the time! Have a great day too, good sir!
@AndrewThiriot
2 жыл бұрын
Thanks for sharing this.
@Producelikeapro
2 жыл бұрын
Thanks Andrew
@billydigz
2 жыл бұрын
i built one of these back in 2006 and still use it lol. but i went even more cheap and just used conduit and electrical boxes. a fraction of the price of steel pipe.
@milanpolak
2 жыл бұрын
This is awesome! Thanks 👍 ❤️
@static-producelikeapro7845
2 жыл бұрын
thanks for watching the video. 🙌🏽
@scottspaldingofficial
2 жыл бұрын
I've just recently finished building a guitar wall mount for my wall. I'm currently sorting out the studio for recording. You can see it on my channel 🙂🙏
@static-producelikeapro7845
2 жыл бұрын
awesome 😎 thanks for sharing!!
@paulEmotionalaudio
2 жыл бұрын
This is very cool! Possible new video series! If so I’d love to see videos on the drumbrella and kick drum mic robot made by (I think), Eric Valentine.
@Producelikeapro
2 жыл бұрын
Thanks ever so much Paul!
@MoreMeRecording
2 жыл бұрын
Very nice work. Based on past experience having down something similar in the past: 1, a lighter coloured choice of moving blankets gives more perceived space than black and over all better light as the blankets absorb more than sound. 2 - realize that it is going to getta hella HOT in there. For anyone recording sweaty rock / metal singers, keep this in mind and have a lot of deodorant on hand.
@static-producelikeapro7845
2 жыл бұрын
these are all very great points. and duly noted about ventilation. I guess by utilizing a basic grommet making tool the color choices can increase as well. thanks for watching 😎
@kiraviolet1563
2 жыл бұрын
Great tip about the lighter fabric. I wouldn't have thought of that. Also agree - deodorant is a huge part of a singer's life that I don't think is talked about enough 😆
@usernameihavechosen289
2 жыл бұрын
Interestingly enough, there's plenty of footage of James Hetfield and Chester Bennington recording in this type of makeshift booths. However, the blanket material doesn't look exactly healthy to me, maybe we should pay attention if there are any materials of oil refining or glass wool or synthetics applied, and opt for certain natural materials instead.
@Aerionix1
Жыл бұрын
wow those blankets really jumped in price since then. This looks great though, definitely going to put together something similar to get out of the cramped closet I currently record in.
@nateluke8003
Жыл бұрын
Cheers to the Maj Toure fans
@andrewwhitehouse1878
2 жыл бұрын
Really nice! Inspiring
@Producelikeapro
2 жыл бұрын
Thanks Andrew
@wmrg1057
2 жыл бұрын
Make sure you have some ventilation, or your singers may pass out. Also, no candles! You may want to put pipe tape on the threads so you can disassemble later.
@static-producelikeapro7845
2 жыл бұрын
those are led fake candles, trying to limit the terminology of “that session was lit” to only a metaphor . and yes the ventilation is an important thing to note for sure we were speaking to someone on a previous comment about a simple USB fan. thanks for watching the video and thank you for all your helpful feedback
@wmrg1057
2 жыл бұрын
@@static-producelikeapro7845 Figured what is in there now was powered. More worried about the vocalist who wants the candles or incenses or some other flammable thinks
@static-producelikeapro7845
2 жыл бұрын
@@wmrg1057 yes we have to keep all flames 🔥 away.. Maybe an essential oil diffuser could bring the desired nasal ambience… 😎🙌🏽
@juangilgarcia2670
2 жыл бұрын
❤️
@leefchapman
2 жыл бұрын
❤
@static-producelikeapro7845
2 жыл бұрын
💜🙌🏽
@asianguy6174
Жыл бұрын
No more tents!!
@BeesWaxMinder
2 жыл бұрын
Cool! Can you even breathe in there?
@stelthtenau
2 жыл бұрын
Still seems like get under a blanket in the corner
@Davo198
6 ай бұрын
Huh?
@rochardentertainmentgroup6714
2 жыл бұрын
This is awesome! Thank you. Since I had to move to an extremely small space I need to do this. May try it this spring.
@static-producelikeapro7845
2 жыл бұрын
that was a big part of the inspiration our previous studio was all in the same room and as I mentioned in the video one of the major cravings was to give the singer some privacy in their own zone as well as help with reflection and even though yes it could be built a little more permanent with wood frames, the pipe either being PVC or iron is something that could be taken apart rather quickly and moved to a new spot if you need. thanks so much for watching the video 🙌🏽
@splashesin8
2 жыл бұрын
🙂
@static-producelikeapro7845
2 жыл бұрын
😎🙌🏽
@Producelikeapro
2 жыл бұрын
Thanks Audrey!
@moedemama
2 жыл бұрын
For less than 500 you could build it out of mineral wool panels
@DJRICKYG
2 жыл бұрын
i wouldve used pvc piping
@static-producelikeapro7845
2 жыл бұрын
Yes that will totally work,as we mentioned at some point in the video it can go many ways based of desired price point and just material preferences. If I didn’t have a bunch of pipe already I would have went that route. Thanks for watching the video 😎
@eddiehulse
2 жыл бұрын
"Some attempt at humor" ;-)
@static-producelikeapro7845
2 жыл бұрын
I should stick day job for sure 😂 or just accepted the laughs from the pipe slamming my food.
@eddiehulse
2 жыл бұрын
@@static-producelikeapro7845 🤣👍👍
@deepspacemusicofficial9671
2 жыл бұрын
Isn't this everyone's dream ? - Kevin Malone . haha thanks for the hack .
@zukipower9960
2 жыл бұрын
Cool idea! I just cleared out the unwanted junk from a closet under the stairs and mounted acoustic sound boards.
@static-producelikeapro7845
2 жыл бұрын
Yes having a good closet is a bonus!!! And great way to inspire junk clearer!! Thanks for watching the video
@Ast3rixMusic
2 жыл бұрын
I cleaned my vocals using an isovox booth. It is also a space saver... Sweetwater 6 pay... fixed my issues.
@Producelikeapro
2 жыл бұрын
Thanks ever so much!
@dantasticguy5435
Жыл бұрын
great video! Would you build one for me and ship to Canada? 😁
@Producelikeapro
Жыл бұрын
Haha I think you’re missing the point of ‘build your own’ haha
@dantasticguy5435
Жыл бұрын
@@Producelikeapro lol Thought I'd give it a chance :D
@RiffMusic1970
2 жыл бұрын
I tried 1/2” PVC. DID NOT WORK. Way too wobbly.
@dingbatjack1234
2 жыл бұрын
Duuuuuude 1/2 inch. Cmon…!
@Producelikeapro
2 жыл бұрын
Hi Riff, indeed, I certainly wouldn't make it out of 1/2 inch!
@Producelikeapro
2 жыл бұрын
@@dingbatjack1234 yes, that would be very flimsy.
@mypetdrgn
2 жыл бұрын
please don't use moving blankets, they give off fibers creating nasty coughing and potential health issues. Best to use sound blankets designed for this, worth the extra bit o cash especially for a booth this size
@officialWWM
2 жыл бұрын
I’m just going to throw this out there but I’m pretty sure your mum didn’t name you Static 🤔
@Producelikeapro
2 жыл бұрын
Haha no? I think it was actually ‘Static Noise’ that’s right isn’t it Static?
@static-producelikeapro7845
2 жыл бұрын
with the middle name “is” STATiC is Noise 😂😂 nope not what Mum named me 😂😂
@Producelikeapro
2 жыл бұрын
@@static-producelikeapro7845 Haha 'is'
@officialWWM
2 жыл бұрын
@@static-producelikeapro7845 I’m going to have to chose myself a much cooler name 😂
@andreirlmeier
2 жыл бұрын
500 bugs is no bargain
@static-producelikeapro7845
2 жыл бұрын
Can truly cut cost in half with plastic pipe and lighter blankets that you put your own grommets or holes in. And the spirit of this is for people with zero carpentry skills like myself. So pipe connected was my option. Many have mentioned to simply hang blankets from the ceiling as a reasonable option. And depending on wood cost and skill a simple frame can also save. If you want please scan some of the other comments, lots of great advice in the many ways to a similar result. Hope you have a wonderful day 😎🙌🏽
Пікірлер: 194