After I saw that primer, I was going to say this was a hack job. But I changed my mind. You’ve never done this before and the mistakes you made will help the rest of us to not make the same ones. Thank you for making this video.
@rjoetting7594
2 жыл бұрын
I'm not a expert and have never done this, but my thought would be to mask the inside before taking it apart, that way you would have a clean sharp line for the primer and after applying the urethane and clamping together peel off the masking. I need to do this myself, and this is the only video I have found that even attempts it. Thanks
@daredevil7442AUTOMOTIVE
2 жыл бұрын
I agree with you, this was the first time I did this....I'm happy video is helping others and it wasn't that difficult to do, beats paying $500++ for a new top!
@sapacif
2 жыл бұрын
Top notch video. Very clear and concise. Looks great. I am a new Corvette guy so learning all I can.
@daviedavidson8355
2 жыл бұрын
Got a c4? Just got my 1st couple days ago
@synthpro
3 ай бұрын
Fantastic video, thanks for sharing your adventure and details about the experimentation process. I took your advice and got a calk gun rated for 26:1 thrust. Thanks again.
@mattbrown7365
3 жыл бұрын
This is exactly the video i needed, thank you! I actually had to patch the roof piece back together with duraglas and sandpaper. It flew off while driving and broke into two pieces!
@daredevil7442AUTOMOTIVE
3 жыл бұрын
I'm happy this helped you! Good luck on your re[pair.
@RobertOShea-c6d
9 ай бұрын
I measured my '96 the gap from rear of targa top to the B pillar is about 3/16". Thanks for the video, I had no idea that these tops could separate like this. Good to know and to keep an eye on.
@jbucci2009
3 жыл бұрын
I have a black 84 C4 same as yours. I would be happy to photograph the rear gap for you. It has never been disassembled.
@daredevil7442AUTOMOTIVE
3 жыл бұрын
Thanks but, I already glued the top on....but, now that you mentioned it? When you get a chance, send me a pic? Let's see how far I'm off from the factory settings? Depending when I get the pic; I'll include it in my next video and show where the true factory gap is? Thanks, Gene daredevil7442@gmail.com
@davidstepeck2644
6 ай бұрын
You have the best window cleaner that exists, since it foams. Then make sure you use new razor blades to scrape of the old epoxy while insuring the glass is always wet. Then what does he do? He uses the handle 7:07 to attempt to remove the glue.
@eggsizedkidz1900
5 ай бұрын
Fantastic video my friend. HUGE help with my 86 c4
@damonbaggs3296
Жыл бұрын
Any updates? I don't think window urethane is the right choice, but idk. I think I'm going with a 3M panel bonding 38115 type epoxy. Full disclosure.... I don't know anything...so there's that. Thanks for the video.
@authenticrebuilds9247
3 жыл бұрын
my top has a split in the middle, I plan on stop drilling, filling with proper epoxy and covering the top with a wrap.
@b.c4066
3 жыл бұрын
Mine just did a backflip down the highway at 55 mph. No warning squeeks, didn't leak etc it appears the urethane bond let go. I am familiar with the Corvette tax, but 500-900 for a piece of smoked acrylic and a tube of windshield urethane is ABSURD. I like your idea, do you have a video of the work being done?
@authenticrebuilds9247
3 жыл бұрын
@@b.c4066 I havnt done it yet, ive been concentrating on the engine health first but when I do Ill be sure to made a video.
@richardmann3396
3 жыл бұрын
I like the rattle can approach.
@phdinnoob4196
2 жыл бұрын
I’m about to do exactly the same thing! Thank you for posting!
@cmanningtsu
Жыл бұрын
I am looking at a targa top that has a corner lifting up. It’s in a condition I think I can spray plasti dip the inside before removing the top from the frame and use the plasti dip as the re-gluing guide
@austincosta912
2 жыл бұрын
Helped me out alot i have a 89 vette🔥
@jerrykadner9027
Жыл бұрын
Thanks for making this video
@daredevil7442AUTOMOTIVE
Жыл бұрын
your welcome
@sapacif
2 жыл бұрын
Does the C4 have roof storage in the rear compartment? Thanks.
@cookcounty9858
2 жыл бұрын
Most definitely, it fits right in the back
@Chlovesss
Жыл бұрын
youre a saint
@user-gh9zl6yg6h
9 ай бұрын
hack
@daredevil7442AUTOMOTIVE
9 ай бұрын
I didn’t notice any brilliance in any content from you? Always a wise guy with no videos of his own….
@user-gh9zl6yg6h
9 ай бұрын
looking for the right way before i do mine ill show you when im done@@daredevil7442AUTOMOTIVE
Пікірлер: 29