Good job man! This is gold to the community. Not as bad as I expected.
@ATS-VRACING
3 жыл бұрын
Great video Josh. And great job on the fuel cam install.
@TroIIingThemSoftly
2 жыл бұрын
Dude was wearing sweatpants and house slippers the entire time 😂
@fatalgarage4365
2 жыл бұрын
You mean garage slippers. I don’t wear them in the house. 🤣
@caddyv2327
3 жыл бұрын
Great video, I did my cam install yesterday thanks to this video
@chrismagnussen4304
3 жыл бұрын
Great vid! Fellow ATS-V owner here.. subscribed.
@jp1seattle
3 жыл бұрын
Right on Josh!!
@Ryan-cp4rh
4 ай бұрын
This makes me miss working on Hondas 😅 I could get an upgraded fuel pump with injectors in an hour😂
@polskifacet
2 жыл бұрын
Great video , super helpful
@polskifacet
2 жыл бұрын
The torque you specified for the cam gears is incorrect: If the intake camshaft position actuator has been replaced, then tighten the bolt to 58 Nm (43 lb ft).
@2Aallday
3 жыл бұрын
Great info.
@Forza3Forza3Forza3
3 жыл бұрын
For your cam shaft to sprocket bolt, i see you torqued only to 18 ftlbs. Other sources ive seen like the GM instructions provided on weaponx and tapout tuning's websites suggest that bolt needs to be torqued to 43 ftlbs. Which should it be?
@fatalgarage4365
3 жыл бұрын
The cam sprocket bolt goes to 43ftlbs. This was misspoken in tape and working on editing.
@stevebrady1835
2 жыл бұрын
So if it was only torqued to 18lbs is it worth tearing it all back down to re tighten??
@Forza3Forza3Forza3
2 жыл бұрын
@@stevebrady1835 if it were me, i would. Probably sleep better at night if you did haha
@markmoreno4763
3 жыл бұрын
Awesome video. I'm about to do the swap myself. When's the second video going to drop?
@fatalgarage4365
3 жыл бұрын
The second part drops tonight or tomorrow morning!
@justingordon2293
2 жыл бұрын
Turbo smart blow off valve 🤔. What's the benefits??
@Jigga713
3 жыл бұрын
Great video!
@rw5694
3 жыл бұрын
Great info video Josh! What are the performance gains from this upgrade?
@fatalgarage4365
3 жыл бұрын
The fuel cam itself adds about 20% fueling capacity, the real benefits will come with the HPFP internals and flex sensor so we can push e85 on this trio.
@aaronthomas1930
2 жыл бұрын
10:00 after that you say passenger and driver side but I feel like you said this opposite?
@kelvinrodriguez8857
2 жыл бұрын
Where are you located!? I have an atsv needs work done 😊😊
@bosspanda6195
2 жыл бұрын
Does the bolt tighten change if ure installing both cams?
@SuperBugalug
Жыл бұрын
Anyone know how many hours this takes?
@402SHO
3 жыл бұрын
How much does the ats-v make full bolt on and what does that all include?
@kylekranz38
3 жыл бұрын
Why not keep the ZZP cam with the Autotech? Maybe I miss it.
@Ez-sk8ig
3 жыл бұрын
I may be wrong, but I recall there being too much lift on the zzp cam, so it pretty much destroys the hpfp once you put in the auto tech internals.
Пікірлер: 29